TRIPLEFINE TF770 Folding Drone

Contact Information

WE ARE ALWAYS HERE FOR YOU

WhatsApp: +8618011983440

EMAIL: TRIPLEFINEDRONE@GMAIL.COM

TEL: +86 18011983440

Facebook Twitter Instagram

Headless Mode Instructions

When taking off, the remote control must be facing the tail of the Drone. After taking off, press the remote control "headless mode" button to enter headless mode. The light of the fuselage flickers, and the remote control buzzer makes a beep. Then press the button of headless mode to exit headless mode.

Note: When the direction of the remote control changes, you need to recalibrate the headless.

One Key Return

Long press the "one key return" button, and the aircraft will fly parallel and backward along the original take-off path. Long press the button again to exit the return mode. This function can be interrupted by the back and forth action of the right joystick during the return process.

Remote Control Photo/Video

1. When you short press the photo button on the controller, the LED on the backside of the drone flashes 1 time.
2. When you long press the video button on the controller, the LED on the backside of the drone flashes quickly, indicating the drone is recording video. Long press again to stop recording video; the LED on the backside of the drone remains on.

Safety Precautions and Statements

1. This product is suitable for people over 14 years old. Please ensure it is operated in a safe environment and used correctly in strict accordance with the safety precautions and operating instructions. Any modification, disassembly, or improper use may cause unpredictable hazards or accidents.
2. The company's scope of responsibility includes improper assembly by users, unsafe environments, unauthorized modification, disassembly, and other illegal operations.
3. This product is a high-tech operational commodity. If it is disassembled, refitted, or used improperly, it may cause damage to parts. If it is defective due to improper operation, it will not be eligible for replacement or return under warranty conditions. For operation and maintenance problems, our agents or after-sales service will provide technical guidance and special price parts supply services.
4. The aircraft is a dangerous commodity. When flying, please keep away from people and obstacles. Improper assembly or damage of parts, poor electronic control equipment, and improper operation within a safe distance (more than 4m) may lead to flight out of control, resulting in unpredictable damage and unexpected accidents. Pilots must pay attention to safe flight and understand the flight requirements and responsibilities in detail.
5. This product is suitable for indoor and outdoor use. It is strictly prohibited to use in areas with high voltage hazards and areas prohibited by the state.
6. When this product is not used for a long time, please turn off the power and take out the battery to prevent the danger of battery leakage.

Maintenance and Repair

1. Clean this product with a clean soft cloth.
2. Avoid exposure to the sun or heat.
3. Do not immerse the toy in water, otherwise the electronic parts will be damaged.
4. Check the plug and other accessories regularly. If any damage is found, please stop using it immediately until it is completely repaired.

Our company has the final interpretation right of this manual.

Contents

• TF770 Drone x1
• Remote control x1
• USB Charging Cable x1
• User manual x1
• Main blades A x1
• Main blades B x1
• Drone batteries x2 (1 in the drone)
• Protection ring x4
• Screwdriver x1

Rectification Procedures

Emergency Stop

1. When the aircraft encounters an emergency during flight, long press the remote control "emergency stop" function key to make the aircraft stop urgently to avoid injury.
2. After the aircraft emergency stop, the indicator light flashes and needs to be re-leveled. (horizontal calibration)

One Touch Takeoff / Landing

1. After the aircraft is unlocked, press the "one button take-off" button on the remote control, and the aircraft will automatically rise to an altitude of about 1.2m and hover.
2. When the aircraft is flying at high altitude, press the remote control "one button landing" button, and the aircraft will land slowly. During the descent, the aircraft can be controlled by the right joystick to land to the designated place, and the propeller stops rotating.

High and Low Speed Switching

During the flight of the quadcopter, the flight speed can be switched by pressing this button while it moves forward, backward, turns left, and turns right. The quadcopter speed defaults to a low speed. Press this button once to switch to medium speed (the transmitter buzzer beeps twice). Press the button again to switch to high speed (the transmitter buzzer beeps three times). One more press returns to low speed (the buzzer beeps once).

3D Eversion

Briefly press the 3D eversion button; the remote control buzzes and makes a beep sound. Push the right operating lever, and the aircraft rolls with the pushing direction. At the same time, the sound disappears, and it enters normal mode.

Note: When the battery is fully charged, the rollover effect is best. There is no way to roll under low battery status.

Low Battery Mode

During the flight, the aircraft indicator flashes slowly, and the remote control keeps beeping, indicating that the battery is low. The flight needs to be ended.

Names of Controller

Camera: Used for taking photos and videos.

Phone clamps: For attaching a smartphone.

Speed switch key: Switches between low, medium, and high speed.

Accelerator: Controls the upward/downward movement of the drone.

Forward trimming: Adjusts forward flight stability.

Leftward trimming: Adjusts leftward flight stability.

Backward trimming: Adjusts backward flight stability.

Rightward trimming: Adjusts rightward flight stability.

Power switch: Turns the drone and remote control on/off.

Power Indicator: Shows the power status.

Flip: Performs a flip maneuver.

One key start/landing: Initiates automatic takeoff or landing.

Emergency stop: Immediately stops the drone's motors.

Direction control stick: Controls the drone's horizontal movement (forward/backward, left/right).

Turn Off the Quadcopter

Method One: Push the left joystick (Accelerator) to the lowest level and hold it there for 2 to 3 seconds; the quadcopter can then be turned off.

Method Two: When the quadcopter is in flight, press and hold the one-key down button. The quadcopter slowly descends to the ground and turns off.

Quadcopter Operation Instructions

• Push the accelerator up or down; the quadcopter flies upward or downward.
• Push the direction control stick up or down; the quadcopter flies upward or downward.
• Push the accelerator left or right; the quadcopter turns to the left or right.
• Push the direction control stick left or right; the quadcopter flies to the left side or right side.

Camera Angle Control

The shooting angle of the PTZ camera can be adjusted through the up or down button of the remote control steering gear.

Camera up [↑]

Camera down [↓]

Protection Ring Installation Method

1. Install the protective frame at the bottom of the motor frame.
2. Installation complete.

Blade Replacement Method

1. Please ensure all propellers are installed in the correct orientation. If the installation is wrong, the aircraft will not be able to fly normally.
2. Installation complete.

Controller Battery Installation

1. Click the button on the battery cover with a screwdriver to take out the battery cover.
2. Install 3x AAA batteries into the battery compartment according to their polarity.
3. Put on the battery cover.

Note: Batteries should be inserted with the correct polarity.

WARNING:

• Do not mix different types of batteries.
• Do not mix old and new batteries.
• Install batteries with correct polarity.

Quadcopter Battery Installation

1. Install the battery module to the battery base of the fuselage in the direction shown in the figure.
2. Installation complete.

Charging Batteries

1. Connect one end of the USB charging cable to the adapter power port, and then connect the other port to the battery charging port. When charging correctly, the USB charging cable indicator is always on.
2. The USB charging line indicator is off, indicating that the charging is complete (the charging time is about 120 minutes).

AC adaptor: 5V 1A/2A

Charging Precautions

• Do not put the battery in a place with high temperature and heat, such as open fire or electric heating device, otherwise damage or explosion will occur.
• Do not hit or strike hard object surfaces with batteries.
• Do not disassemble the battery.
• Do not immerse the battery in water. The battery should be stored in a dry place.
• Do not leave unattended when charging.
• Do not put the battery on inflammable materials such as blankets for charging.
• Do not charge the battery when it is hot after the aircraft has been in operation.
• Please use the original USB charging cable to charge the battery.

Ready to Fly and Close

Boot Up: Place the Drone on a horizontal plane after deployment, and long press the power button; the light flashes, indicating standby mode.

Note: The tail of the quadcopter should be aimed at the controller.

Pairing: Long press to turn on the power switch of the remote control. The Drone fuselage light turns to normal light, and the frequency matching is completed.

Horizontal Calibration: Lower the left control lever of the remote control 45 degrees to the left, and the right lever down 45 degrees to the right. The remote control emits a "drip" sound, and the light of the fuselage flickers and stays on to complete the horizontal calibration.

Start the Quadcopter

Method 1: Move the left control lever of the remote control down 45° to the left, and the right control lever down 45° to the right. The remote control makes a "drip" sound, the propeller blades rotate slowly, and the aircraft is unlocked.

Method 2: After the aircraft is unlocked, push the left joystick of the remote control upward, and the propeller accelerates to rotate and fly off the ground.

Method 3: When the aircraft is at a standstill after frequency matching, press the "one button take-off" button on the remote control. After the aircraft propeller rotates slowly, it will automatically rise to an altitude of about 1.2m and hover.

FCC ID

FCC ID: 2BCO8-TFDRONE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.