ATLAS

Box Contents

What's in the box:

1. Majority Atlas PC Soundbar (A)
2. Power Adapter (B)
3. Instructions Guide (C)

The package includes the Majority Atlas PC Soundbar, a power adapter, and an instructions guide.

Controls & Functions

Top View

The top of the soundbar features the following controls:

• 1. Play/Pause ⏯
• 2. Previous/Rewind ⏮
• 3. Indicator light
• 4. Next/Fast forward ⏭
• 5. Mode button

Front View

The front of the soundbar features:

• 6. On/Off/Volume dial

Controls & Functions (Continued)

Back View

The back of the soundbar features the following ports:

• 7. SD card slot
• 8. DC 5V power input
• 9. USB slot
• 10. AUX input

Setting Up Your Majority Atlas

Refer to button numbers (e.g., Ref. *number*) as shown in diagrams on pages 2-3.

Connecting and Powering the Unit

Connect the mini USB connector of the provided USB to Mini USB power cord to the back of the unit (Ref.8). Plug the other end into a USB power supply (mains adaptor or other USB power supply).

Switching On Your Majority Atlas Soundbar

Turn the unit on by rotating the On/Off/Volume dial (Ref.6) clockwise until it clicks into place. To switch the unit off, rotate the dial (Ref.6) anti-clockwise until it stops.

Basic Operations

Use the On/Off/Volume dial (Ref.6) to switch the unit on/off and adjust the volume.

In Bluetooth, SD, or USB mode, use the Play/Pause button (Ref.1) to play or pause a track. Use the Previous/Rewind (Ref.2) and Next/Fast Forward (Ref.4) buttons to skip tracks or fast forward/rewind (press and hold for rewind/fast forward). Refer to page 5 for detailed controls.

Press the MODE button (Ref.5) to cycle through modes: SD card, Bluetooth, AUX, and USB.

Bluetooth, SD & USB Controls

The following controls and functions apply to Bluetooth, SD card, and USB modes. For AUX controls, see the 'AUX Mode' section on page 10.

Note: (H) indicates 'Press and hold'.

Bluetooth Mode

Connecting a Bluetooth Device

To connect an external device, ensure the soundbar is in 'Bluetooth' mode by pressing the MODE button (Ref.5). The soundbar will announce 'Bluetooth mode'. The indicator light (Ref.3) will flash during connection and remain static blue when connected.

On your external device, enable Bluetooth and select 'Majority Atlas' from the list of available devices. Upon successful connection, the soundbar will announce 'Connected'. If disconnected, it will announce 'Disconnected'. Switching to a different mode will automatically disconnect Bluetooth.

Controls and Functions

Please refer to page 5 for control details.

USB & SD Card Mode

USB and SD Card

When a USB drive or SD card is inserted, the unit automatically switches to the appropriate mode and begins playing audio. If necessary, use the MODE button (Ref.5) to select 'USB' or 'SD' mode.

USB

Insert a USB drive into the USB port at the back of the unit (Ref.9). When USB mode is active, the soundbar will announce 'USB driver mode'. Maximum compatible storage is 64GB.

Micro SD Card

Insert a micro SD card into the SD port at the back of the unit (Ref.7). When SD card mode is active, the soundbar will announce 'SD card mode'. Maximum compatible storage is 64GB.

Controls and Functions

Please refer to page 5 for control details.

AUX Mode

Connect an external device to the 'AUX' input (Ref.10) using the included 3.5mm to 3.5mm AUX cable.

Switching to AUX Mode

When an AUX cable is plugged into the AUX port at the rear of the speaker (Ref.10), the unit will automatically switch to AUX mode, indicated by 'Line in mode'. If necessary, select 'AUX' mode using the MODE button (Ref.5).

Controls and Functions - AUX

Troubleshooting

Support

For further assistance with your soundbar, please contact the Majority support team on the website: www.majority.co.uk/support.

Specifications & Warranty

Specifications

Warranty

All products come with a standard 12-month warranty. To validate the warranty, all items must be registered on www.majority.co.uk. On the website, navigate to 'Register Your Product'. You may also extend your warranty for an additional 24 months, free of charge.

Safety Information

Please read and keep these instructions. Heed all warnings and follow all instructions.

General Safety Precautions

• Do not clean the apparatus near or with water.
• Do not block any ventilation openings. Install according to manufacturer's instructions.
• Do not install near heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Protect the power cord from being walked on or pinched, especially at plugs and where it exits the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this apparatus during light storms or when unused for long periods.
• Refer all servicing to qualified service personnel. Servicing is required if the apparatus is damaged (e.g., power cord, liquid spillage, object insertion, exposure to rain/moisture, abnormal operation, or dropping).
• No naked flame sources, such as lit candles, should be placed on the apparatus.
• Dispose of used electrical products and batteries safely according to local authority regulations.

Additional Warnings

The apparatus shall not be exposed to dripping or splashing. Do not place objects filled with liquid (e.g., vases) on the apparatus. The main plug serves as the disconnect device and must remain readily operable. To completely disconnect from mains, unplug the main socket outlet. The battery shall not be exposed to excessive heat such as sunshine or fire.

Recycling Electrical Products

Please recycle your waste electrical goods to help the environment. The symbol ♻️ indicates that electrical products should not be disposed of with normal household waste. Ensure it is taken to a suitable facility for disposal.

IMPORTANT: Please read all instructions carefully before use and keep for future reference.

CAUTION: Risk of electric shock. Do not open.

ATTENTION: RISQUE D’ELECTROCUTION. NE PAS OUVRIR !