User Manual for SC T models including: HS04-4K6G HDMI Switcher, HS04-4K6G, HDMI Switcher, Switcher
6 hours ago — 1, 2, 3, 4. Currently select input signal channel and disable auto scan function. Page 4. 3. User Manual. HS04-4K6G.
8 hours ago — HS04-4K6G is a 4 input HDMI automatic switcher that supports superior resolution up to 4K@60Hz 4:4:4. Besides, the auto-scan function allows the switcher to ...
HDMI Switcher User Manual Model : HS04-4K6G 4K 60Hz 4 x 1 HDMI Switcher Smart Cabling & Transmission Corp. User Manual HS04-4K6G Introduction HS04-4K6G is a 4 input HDMI automatic switcher that supports superior resolution up to 4K@60Hz 4:4:4. Besides, the auto-scan function allows the switcher to switch to an available or last connected HDMI source automatically. It is a perfect solution for home theaters, security rooms, and so on --no more hassles plug-ins for multiple HDMI devices. Features Resolution up to 4K@60hz 4:4:4. Built in RS232 console port for remote control or firmware update. Supports auto-scan function, automatically switch to the next available input when the selected one is unable to display (30 seconds). Supports auto switching function, automatically switch to the last connected input source. Managed via front panel buttons, IR remote, RS232. Panel View HS04-4K6G IR Remote Control Setting This device could use IR remote control for function setting and control, The ID number must be setup before using IR remote control or change new batteries. Setup IR remote ID number Press and hold "Power Symbol" button and press number 0. 1 Installation View HS04-4K6G User Manual HS04-4K6G LED Indication Power AUTO SCAN AUTO JUMP 1, 2, 3, 4 ON/OFF FLASH ON/OFF ON/OFF ON FLASH System activate/ standby. Panel button or IR remote control disabled by remote PC. Auto scan function activated/disabled. Auto jump function activated/disabled. Currently selected input signal channel. No signal input. Panel Button Function Power AUTO SCAN AUTO JUMP DIMMER 1, 2, 3, 4 System activate/ standby. Auto scan function activated/disabled. Auto jump function activated/disabled. LED brightness adjustment. Currently select input signal channel and disable auto scan function. 2 User Manual HS04-4K6G Remote Control Operating A, B Mode Switching There are two remote control operating modes: When this device power on, you could switch A, B mode by pressing the panel "power" button and remote control "*" button together. Mode A operating mode: It come with auto scan & auto jump functions. Mode B operating mode: When auto scan & auto jump functions no need to use, which only need single button for quick operation on AV switch. Factory default is set to (Mode A). IR remote control Mode A Operating Power symbol 1234 (567) 0 # MENUENTER(567)89 System activate/standby. Select next available input and activates auto scan function. Select previous available input and activates auto scan function. Select previous input and disable auto scan function. Select next input and disable auto scan function. Currently select input and disable auto scan function. Auto jump function activated/disabled. LED brightness adjustment. Reserved (no function). IR remote control Mode B Operating Power symbol 1234 (567) # MENUENTER(567)890 System activate/standby. Select next input and system activate. Select previous input and system activate. Select previous input and system activate. Select next input and system activate. Currently select input and system activate. LED brightness adjustment. Reserved (no function). Auto Scan Function Under auto scan operation, if the selected input video signal disappears over 0.5 second, it would automatically select the previous or next input with video signal. 3 User Manual HS04-4K6G Auto Jump Function Under auto jump operation, if there is a new video signal input, it will automatically switch to a new video signal input. LED brightness setting LED brightness could be set up as the following 4 levels 1. Minimum Brightness 2. Normal Brightness 3. Maximum Brightness 4. Brightness auto change Factory default is set to level 3. Under Brightness auto change mode, press any button or IR remote control, or video signal changed (video signal disappears or show up), LED status will show the maximum brightness up to 5 seconds then back to the minimum brightness. Computer Remote Control Function This RS-232 terminal could be connected with computer, to use terminal program for remote control operation, the communication format is 9600, 8, N, 1 (9600 Bps, 1 start bits, 8 data bits, 1 stop bit). Under remote control operation, If it shows COMMAND, then it is "under command mode". It could easily be operated and set by entering the following commands in the chart. PressEnter: if it shows OK! then the previous command is completed; showing ERROR! indicates the previous command is incorrect. Command Mode Instruction [COMMAND] [DESCRIPTION] ------------------------- ------------------------------------------- n Currently select input and disable auto scan. PRE Select previous available input and activates auto scan. NEXT Select next available input and activates auto scan. SCAN y Auto scan function activated/disabled. JUMP y Auto jump function activated/disabled. ACTIVATE System activate. STANDBY System standby. MODE x Select operation mode A/B. 4 IR y KEY y LED n SAVE LOAD KEYPAD SIGNAL STATUS VERSION ? IR remote button lock/unlock. Panel button lock/unlock. LED brightness adjustment. Save setting. Load setting. Keypad mode operation. Display input signal status. Display setting. Display firmware version. Show all commands. [SYMBOL] [PARAMETER] ------------------------- ------------------------------------------- n 1 | 2 | 3 | 4 x A | B y ON | OFF Space characters between the command and parameters can be ignored. User Manual HS04-4K6G Virtual Remote Control Mode Showing KEYPAD : when it is under virtual remote control mode, which you could enter the following commands at the terminal to simulate the IR remote control operation. After press command if it shows OK! then the previous command is executed; showing ERROR! indicates the previous command is incorrect. System Activate Virtual Remote Control Mode A/B Operate description MODE A [COMMAND] [DESCRIPTION] ------------------------- ------------------------------------------- 1 2 3 4 Currently select input and disable auto scan. - Select previous available input and activates auto scan. + Select next available input and activates auto scan. L Select previous input and disable auto scan. R Select next input and disable auto scan. 0 Auto jump function activated/disabled. / System activate/standby. . LED brightness adjustment. Q Command mode operation. S Display setting and input signal status. ? Show all commands. 5 MODE B [COMMAND] [DESCRIPTION] ------------------------- ------------------------------------------- 1 2 3 4 Currently select input. - Select previous input. + Select next input. L Select previous input. R Select next input. / System activate/standby. . LED brightness adjustment. Q Command mode operation. S Display setting and input signal status. ? Show all commands. User Manual HS04-4K6G System Standby Virtual Remote Control Mode A/B Operate description MODE A [COMMAND] [DESCRIPTION] ------------------------- ------------------------------------------- / System activate/standby. Q Command mode operation. S Display setting and input signal status. ? Show all commands. MODE B [COMMAND] [DESCRIPTION] ------------------------- ------------------------------------------ 1 2 3 4 Currently select input and system activate. - Select previous input and system activate. + Select next input and system activate. L Select previous input and system activate. R Select next input and system activate. / System activate/standby. Q Command mode operation. S Display setting and input signal status. ? Show all commands. Remark There are some DVD equipment still have +5V signal output under power off status, it will cause auto jump and auto scan function abnormal, please disable auto jump and auto scan function to avoid any abnormal operation. 6 Package Include HS04-4K6G Switcher x 1 pcs IR remote control x 1 pcs Mounting Screw pack x 1 bags Power Adapter x 1 pcs Specification ITEM NO. Support Compliance Max. HDMI Resolution Video Bandwidth RS232 Baud Rate IR Support Ports & Interfaces Video Input Video Output RS232 Interface (Console) Power Power Supply Power Consumption Ambient Temperature Operation Storage Humidity Physical Characteristics Dimensions Weight HS04-4K6G HDM 2.0, HDCP 1.4/ 2.2, 3D 4K@60Hz 4:4:4 12bits 18 Gbps 9600 bps 38Khz , ±45°, 5M 4 x HDMI Type A 1 x HDMI Type A 1 x DB9 Female DC 5V 1A 370mA 0 to 55 -20 to 85 Up to 95% 253 x 143 x 40mm 800g 7 User Manual HS04-4K6GMicrosoft Word 2013 Microsoft Word 2013