Panasonic Washing Machine Operating Instructions

Safety & General Precautions

General Safety Warnings

• Do not disassemble, repair, or remodel the machine. Consult your dealer for repairs. ⚠️
• Never touch the laundry during the spin cycle until the tub has completely stopped. ⚠️
• Do not install the washing machine in damp places or places exposed to weather. This risks electric shock, fire, breakdowns, or deformation. ⚡?
• When cleaning, do not spray water directly onto any part of the machine. This can cause short circuits and electric shock. ⚡
• Do not leave water in the tub when not in use, as children may fall in and drown. ?
• Do not allow children to peer into the wash tub or place stools nearby. ?
• This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience, unless supervised. Children should be supervised to ensure they do not play with the appliance. ?
• Do not place flammable substances (kerosene, benzine, paint thinner, alcohol) near the machine. Do not put clothing with such substances in the tub. Risk of explosion or fire. ?
• Do not damage the power cord and plug (bend, twist, pull, bundle). Do not place near heating appliances or heavy objects. Damaged cords risk electric shock, short circuit, and fire. Consult dealer for repair. ⚡?
• Remove dust accumulating around the electric cord. Damp dust can cause fire. Pull out the plug and wipe with a dry cloth. If not using for a long time, unplug the machine.
• Always pull the power plug out before cleaning or maintenance to avoid electric shock or injury. ⚡
• Ensure the ground wire is correctly attached to prevent electric shock or leakage. Consult your dealer for grounding work. ⚡
• Make sure the plug is pushed completely into the outlet to prevent electric shock and fire due to overheating. Never use a damaged plug or cord. ?
• Do not use plug sockets or wiring equipment beyond their rated capacity, as this can cause fire due to overheating. ?
• Do not place burning objects (candles, cigarettes) near the machine. Risk of fire or deformation. ?
• Do not pull out or push in the power plug with wet hands. Risk of electric shock. ⚡
• Always check the hose connection before starting washing. Loose screws can cause water leakage. ?
• Do not use water hotter than 50°C (122°F). Plastic parts may deform, leading to electric shock or leakage. ⚠️
• Do not put hands or feet under the machine while it is operating, due to the rotating mechanism. ⚠️
• Do not climb up or place heavy articles on top of the machine. Risk of injury from deformation or breakage. ⚠️
• Never disconnect by pulling the cord; hold the plug. Pulling the cord risks electric shock or short circuit, potentially causing fire. ⚡?
• Do not wash or spin waterproof cloths, materials, or sheets (e.g., raincoats, ski wear). These may come out of the tub during spin, damaging clothes or the machine. ⚠️
• Install the machine on a sturdy floor with a maximum inclination of two degrees.
• If installed on carpet, ensure the carpet does not block any openings.

Power Shutdown Recovery

If the power fails during a wash, the machine remembers the time. Press "On" and "Start" to continue. Press "Off" to cancel the program.

Name Of Parts

The washing machine consists of the following parts:

• Lid: The main cover of the washing machine.
• Inner Lid: A secondary lid inside the main lid.
• Lint filter: Collects lint from the laundry.
• Tub: The drum where laundry is placed for washing.
• Operation panel: Controls and indicators for operating the machine.
• Pulsator: The part that agitates the water and laundry.
• Bottom plate: Located at the base of the machine.
• Base: The supporting structure at the bottom.
• Adjustable Knob: Used to level the machine.
• Water supply hose: Connects the machine to the water faucet.
• Softener case: Compartment for fabric softener.
• Detergent / Bleach inlet: Compartment for detergent and bleach.
• Leveller: Helps to adjust the machine's balance.
• Power cord and plug: Connects the machine to the electrical outlet.
• Drain hose: Carries water away from the machine.

Included accessories typically include a water supply hose, drain hose, water tap adaptor, and a bottom plate.

How To Install

Placement

Install the washing machine in a location that is:

• Not extremely damp, such as a bathroom, or exposed to weather. ⚠️
• Free from freezing temperatures in winter.
• Not exposed to direct sunlight.

Connecting the Water Supply Hose

1. Loosen the four screws on the water tap adaptor enough to slip it over the faucet.
2. Slip the connector over the faucet, keeping it straight, and tighten the screws evenly.
3. Remove tape and secure part B to A by turning B to the right. Firmly tighten to prevent leakage. ?
4. Slide the hose onto the connector until it clicks.
5. Pull the hose down to ensure it is secure.
6. Turn on the water faucet to check for leaks.

Attention: For reinstallation, turn B left until ~4mm thread is visible. The connector may not work with extension/all-purpose faucets; use CB-J3 (sold separately).

Power Cord

Ensure the plug is fully inserted into the outlet to prevent electric shock and overheating. ?⚡

Connecting Water Supply Hose to Valve Screw

1. Push the hose nut straight onto the water supply valve screw.
2. Fit the elbow, screw the nut, and tighten firmly.
3. Check for looseness.
4. Open the faucet to check for leaks.

Firmly tighten the unit to prevent leakage. ?

Connecting the Drain Hose

If the drain hose is too short, use an extension hose. Ensure proper length and height. Inlet water pressure: 0.03-1 Mpa (0.3-10 kgf/cm²). Use new hose-sets.

Bottom Plate (Anti-Rat Protection Base) Installation

Purpose: To prevent rats from damaging internal parts and for safety.

Installation: Take the bottom plate from the rear side, then slide and hook it to the base.

Adjusting the Adjustable Leg

Turn the adjustable leg knob towards [LOOSE] to loosen and adjust for shaking. Turn towards [TIGHTEN] for even placement.

How To Use Detergent, Softener And Bleach

General Steps

1. Put laundry in, press Power "On".
2. Press "Start". Water level is indicated. (If water is present, level is set to 94L).
3. Add recommended detergent amount into the "Detergent / Bleach inlet" according to water level. (See page 14 for details).
4. If difficult to add detergent, turn the tub by hand after setting water level (requires Power "On" and "Start" buttons pressed).

How to Use Powdered Detergent

Dissolve: Fill tub with water one level below target. Add powder, run for 3 mins. Add laundry, start wash.

Hard-to-dissolve: Dissolve in ~30°C water in a container, mixing well. Add to tub.

Warning: Powder detergent may not dissolve as well as synthetic. Rinse thoroughly to avoid yellowing or smell. Too much or cold water can cause clumps that stick to the tub/hose.

How to Use Bleach

• Liquid Bleach: Put into "Detergent / Bleach inlet".
• Powder Bleach: Put into "Detergent / Bleach inlet".

How to Use Softener

Put softener and water into the softener case before washing. Keep level below the arrow. ?

Note: Do not let softener sit for long. It's added automatically at the end of the rinse cycle.

Table of Softener Quantities

Detergents And Directions For Use

Refer to the table for recommended detergent quantities based on water level and laundry amount.

Attention: Some detergents have specific usage methods. Refer to your detergent's instructions. Powder soap may not dissolve easily. Rinse thoroughly to avoid yellowing or smell. At low water levels (under 46L), water might not pass through the lint filter.

Operations Panel

The operations panel allows you to control and monitor the washing machine.

Indicators

• Progress Indicator: Shows the current cycle stage.
• Reserve: Allows setting a delayed start time (2-24 hours).
• Course Indicator: Displays the selected wash course.
• Premium Hand Wash: Indicates the Premium Hand Wash course is selected.
• Power Switch: Turns the machine on/off. Auto-off after 10 minutes of inactivity.

Buttons

• Water Level: Adjusts the water level for the wash.
• Air Dry: Activates the Air Dry function.
• Child Lock: Activates/deactivates the child lock feature (press for 5 seconds).
• Start / Hold: Starts or pauses the wash cycle.
• Process: Selects custom wash cycles.
• Intensive: Selects the Intensive wash course.
• Course Selection: Allows choosing a suitable course based on laundry.
• Off: Turns off the machine.
• Power: Turns the machine on.
• Reserve: Button to set the delayed start timer.
• Program: Button to select wash courses.

Key Functions

Reserve Function

You can select the finishing time of the washing course 2-24 hours from the current time. This function can be used with all courses except Tub Hygiene.

How to Operate Reserve

1. Put in clothes, press Power "On".
2. Press the Reserve button and select the 2-24 hours and course (except Tub Hygiene).
3. Press the "Start" button.
4. Add detergent according to water level.

Normal / Soak • Normal / Course

Normal course: Suitable for "soft-wash" casual clothes.

Soak • Normal course: Suitable for washing stained laundry and soiled collars/cuffs.

1. Put laundry in, press Power "On".
2. Press "Program", select "Normal" or "Soak • Normal" course. (Soak time 1 hr).
3. Press "Start". The machine measures load and displays water level. Adjust "Water Level" manually if needed.
4. Add detergent to the "Detergent / Bleach inlet".

My Favorite Course

Suitable for washing laundry by your own custom settings.

1. Put laundry in, press Power "On".
2. Press "Program", select "My Favorite" course.
3. Press "Water Level" to choose settings, then press "Start".
4. Add detergent to the "Detergent / Bleach inlet".

Speedy Course

Suitable for washing lightly soiled cloth or quick wash.

1. Put laundry in, press Power "On".
2. Press "Program", select "Speedy" course.
3. Press "Start". The machine measures load and displays water level. Adjust "Water Level" manually if needed.
4. Add detergent to the "Detergent / Bleach inlet".

Blanket/Soak • Blanket Course

Suitable for washable blankets (single size, 100% synthetic fibre). E.g., Cashmere comforter (~4.2 kg).

1. Put laundry in, press Power "On".
2. Press "Program", select "Blanket" or "Soak Blanket" course. (Soak time 1 hr).
3. Select Water Level (74L-94L), then press "Start".
4. Add detergent to the "Detergent / Bleach inlet".

Intensive Course

Suitable for heavy dirty clothes.

1. Put laundry in, press Power "On".
2. Press "Intensive" button.
3. Select "Water Level", then press "Start".
4. Add detergent to the "Detergent / Bleach inlet".

Premium Hand Wash Course

Suitable for delicate items. Use tap water 30°C or lower. Do not use hot water. Use only liquid type neutral detergent. Do not use bleach. Avoid detergents that create excessive foam.

1. Put laundry in, press Power "On".
2. Press "Premium Hand Wash" course.
3. Select Water Level (50L-62L), then press "Start".
4. Add appropriate amount of liquid detergent.

Attention: Take clothing out immediately after washing, shape, and dry to prevent wrinkling and color transfer.

Tub Hygiene Course

Prevents mold growth and keeps the tub dry. Recommended once a month. Operation lasts 2.5 hours.

1. Press Power "On".
2. Press "Program", select "Tub Hygiene". (Do not put any laundry in the tub).
3. Press "Start".
4. When filled with water, press "Start" again and pour about one cup of chlorine system bleach directly into the tub.
5. Close the lid, and press "Start".

Air Dry Course

For drying the tub.

1. Press Power "On".
2. Press "Air Dry" button, select time (1.5, 1, 0.5 hrs).
3. Press "Start".

Spin Only (Drain-Spin), Etc.

Select cycle combinations like "spin only" or "wash only" using the "Process" button.

• To increase rinse efficiency: Refill water during rinse.
• To spin the laundry: Use "Spin" cycle.
• To reuse wash water: Use specific cycles.
• To rinse and spin soaked laundry: Use "Rinse • Spin" cycle.

Rinse Types:

• Full tub: Tub is filled with water to rinse laundry.
• Refill: Water is continuously supplied during rinsing.

Note: When selecting "Spin" or "Rinse • Spin", the machine will drain if water is present. Do not use softener with single rinse cycles.

Clever Laundry

Using Bleach

• Liquid Bleach: Put into "Detergent / Bleach inlet".
• Powdered Bleach: Put into "Detergent / Bleach inlet".

Using Wash Water Twice

1st Step (Light Dirt): Put laundry in, press Power "On", add detergent, press "Wash" only, then "Water Level" and "Start".

2nd Step (Heavy Dirt): Take out first wet laundry. Put in second laundry, press Power "On", press "Wash / Rinse / Spin" to set "Wash • Rinse • Spin". Select "Water Level", press "Start".

3rd Step (Final Rinse/Spin): Put first wet laundry back in. Press Power "On", press "Rinse / Spin" to set "Rinse • Spin". Select "Water Level", press "Start". Remove all laundry.

Laundry Tips

End-of-Cycle Buzzer

To Cancel: Press Power "On" and "Start" simultaneously for at least 3 seconds. Buzzer sounds once.

To Set: Repeat the procedure. Buzzer sounds twice.

Key Points For Better Washing

• Wash lint-producing items separately from towels and blankets.
• Brush clothes before washing.
• Turn inside out garments that shed lint or lint balls.
• Scrub very dirty collars and cuffs with a detergent-soaked brush.
• Press down bulky items lightly to ensure they are thoroughly soaked.
• Fasten bands on aprons, pillow covers, etc.

Child Lock Mode

What is the Child Lock Mode? An emergency alarm mode to prevent children from drowning. If the lid is opened when the tub contains water, a buzzer sounds. If the lid remains open for >10 seconds, the machine stops and drains.

How to Set and Cancel

With Power Off, press Power "On" while holding the Child Lock button. Then hold Child Lock for >5 seconds. Buzzer sounds once for set, twice for cancel.

How to Stop Water Release

Unplug the power cord, close the top lid, then plug the cord back in and turn Power "On".

Maintenance

Lint Filter

Clean the lint filter after each operation. Remove the filter, remove lint, and put it back securely.

If the filter is torn, purchase a replacement from your dealer. If hard to remove, you can turn the tub after pressing Power "On" and "Start" (refer to page 11).

Water Supply Hose Filter

If water supply seems constricted, turn off the faucet. Press Power "On", then "Start". After a few seconds, press Power "Off". Loosen the nut, take away the hose, and clean the filter.

Main Unit and Tub

Main Unit: Wipe with a soft cloth. Use neutral dishwashing liquid or mild soap for stubborn spots. Do not pour water directly. Do not use cleaners like paint thinner, alcohol, or kerosene.

Upper part of the tub: Wipe with a damp cloth. Do not pour water directly.

Cleaning the tub (stainless steel type): To remove rust, use dishwashing liquid. To remove water scale, use a bathtub cleaner.

Troubleshooting

Symptoms and Causes

• Detergent does not dissolve completely: Check if put directly into tub or softener drawer. Always use "Detergent / Bleach inlet".
• Tub begins filling mid-wash: May occur with large laundry load/high water level, or if water is already in tub.
• Water level too high: If laundry is pre-soaked or tub has water.
• Water level too low: With light synthetic/blended fabrics.
• Operation changes to rinsing during spin: Unbalanced load detected; correction occurs, then spin resumes.
• Irregular movement during spin: To suppress suds, tub turns slowly then quickly.
• Buzzer not stopping/draining: Check if Child Lock mode is active and lid is left open.

Button Issues

• Buttons not working: Only "Water Level" is available during wash. Power off and reconfigure to change settings.
• Rinse cycle no water: If water is in tub, draining starts first.
• Water not flowing through lint filter: May occur at "Very low" water level.

Machine Not Running

Check power, fuse/breaker, plug, faucet, "Power On" button, and "Start" button.

Water Not Supplied

Check faucet, water supply cut-off, and hose connection for clogs.

Error Indications

• U11: Drain hose issues (clogged, crushed, tip in water, too small, frozen, height >10cm, extension too long, hose down).
• U12: Lid opened or not closed properly.
• U13: Unstable position, inclined floor, uneven laundry distribution.
• U14: Water supply issues (faucet off, frozen hose, supply cut off, clogged hose connection).
• U99: Child Lock mode active, lid open >10s, forcing drain.

Please Observe The Following

• If tub does not stop within 15 seconds after opening lid during spin cycle, stop use and contact dealer. ⚠️
• Do NOT put too much detergent: may cause insufficient rinsing or foam overflow.
• Do NOT hold magnets or cards with magnetic strips near the machine: cards may become unusable, magnets may stop tub spinning. ?
• Do NOT allow spray near the lid: avoid pesticides, hair products, deodorants, etc., which can cause malfunctions or damage.
• Do NOT use a vinyl chloride cover: may damage plastic paint. Use a cloth cover.
• Do NOT put too much laundry: causes torn clothing or damage.
• For long periods of non-use: turn off power and unplug to save electricity. ?
• Do NOT place charger stands near the machine: may cause malfunction.
• Power cord and plug: If damaged, must be replaced by a qualified service agent.

Specifications