Fanttik Fold V10 Ultra Deluxe Cordless Handheld Vacuum Cleaner

Quick Start Guide

How to assemble

Diagram showing assembly steps for the vacuum cleaner, including attaching different brushes.

Cleaning

Diagram illustrating the process of cleaning the vacuum cleaner's components.

Charge

Diagram showing how to charge the vacuum cleaner using a USB-C cable and the charging base.

USB-C INPUT: 5V=3A / 9V=2A / 12V=1.5A (PD18W)

CHARGING BASE INPUT: 9.5V = 1.5A

Contents

1. IMPORTANT SAFETY INSTRUCTIONS
2. PRODUCT OVERVIEW
3. PACKAGE CONTENTS
4. HOW TO USE
5. CLEAN AND MAINTENANCE
6. WALL MOUNTING
7. LED INDICATOR
8. TOXIC AND HAZARDOUS SUBSTANCES
9. TROUBLESHOOTING
10. SPECIFICATIONS

1. IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of fire or injury:

All the safety and operating instructions should be read before use and should be followed to avoid injury, fire, electric shock, property loss, and other risks.

• These appliances are intended for household use only.
• This product has an internal battery. Do not put the device into fire or heat it. Do not charge, use, place it under high temperature conditions, and do not store it in the car in case of overheating, ignition or explosion.
• It is recommended to charge, use or store the device between 32°F and 104 °F.
• People with physical, mental or sensory disabilities should not use the device for your safety.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Do not use the device with wet hands to avoid injury.
• Do not use this device to vacuum up any liquid such as water and cola.
• Do not vacuum smoking or burning things such as cigarette butts, matches, or hot ashes.
• Do not vacuum hard or sharp objects to avoid injury when cleaning the dust bowl.
• Do not use scented products on this equipment to avoid fire caused by the flammable chemicals in them.
• Do not modify or repair the internal battery.
• Do not use it in heated or moist places such as heating room and bathroom.
• When the vacuum cleaner's service life is over, please give it to the recycling location designated by the government because the internal battery cannot be taken out.
• If the charging wire is damaged or broken, please stop using it immediately.
• If you don't use it for a long time, please unplug the charging cable after full charge and place it in a cool dry place. Charge it at least once every 3 months to avoid battery loss.
• If the device needs to be transported, it is recommended to use the original packaging box and keep it in the “OFF” state.
• Unplug from outlet when not in use and before servicing.
• Do not allow to be used as a toy. Close attention is necessary when used near children.
• Use only as described in this manual. Use only manufacturer's recommended attachments.
• If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Keep cord away from heated surfaces.
• Do not put any object into openings. Do not use with any opening blocked.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not use without dust bag and/or filters in place.
• Prevent unintentional starting. Ensure the switch is in the off-position before picking up or carrying the appliance. Carrying the appliance with your finger on the switch or energizing appliance that have the switch on invites accidents.
• Recharge only with the charger specified by the manufacturer.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
• Do not use an appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
• Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause explosion.
• Follow all charging instructions and do not charge the appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.
• Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
• Do not modify or attempt to repair the appliance except as indicated in the instructions for use and care.
• Use only with Listed/Certified Information Technology(Computer) Equipment, or Listed/Certified ITE Power Supply, or Listed Class 2 Power Unit.
• This appliance contains batteries that are non-replaceable.

SAVE THESE INSTRUCTIONS

Please save the safety and operating instructions. We assume no responsibility for your property loss caused by improper use.

2. PRODUCT OVERVIEW

Diagram labeling the parts of the Fanttik Fold V10 Ultra Deluxe vacuum cleaner:

• Pivot lock button
• Speed switch button
• On/Off button
• Digital display
• Lighting
• Dust container release button
• Type-C Charging port
• Dust collector extension
• Container door release latch
• Container door
• Charger
• Charging base

3. PACKAGE CONTENTS

Diagram showing the items included in the package:

• Charging base
• Soft Bristle Brush × 1
• Hard Bristle Brush × 1
• Replacement Filter × 1
• Filter Brush × 1
• USB-C Cable × 1
• User Manual × 1
• 2in1 Multi-Surface Brush × 1
• Wall Plug/Screw x2

4. HOW TO USE

How to assemble

Diagram illustrating the assembly process, including attaching different brushes like the Pet brush, Multi-Surface brush, Soft Bristle Brush, Hard Bristle Brush, and 2in1 Multi-Surface brush. The text explains to take out the main machine, press the Pivot lock button to adjust the dust collector angle, select the required accessories, and install them on the front port.

How to charge

1. Open the silicone cap on the rear housing.
2. When using TYPE-C charging, prepare a 5V 3A/9V 2A/12V 1.5A (PD18W) power adapter (not included) and connect the type-c charging cable for charging. Charging takes about 2-2.5 hours.
3. When using the charging base, fold the vacuum cleaner and place it in the groove of the charging base, aligning it with the convex pad. Charging takes about 3-3.5 hours.
4. The device can be used for about 13 minutes in high speed mode or about 35 minutes in low speed mode after a full charge.
5. The lithium-ion battery must be fully charged before first use and after long-term storage.
6. If not used for a long time, it is recommended to charge the device every three months.

Diagrams showing USB-C charging and charging base usage.

USB-C INPUT: 5V=3A / 9V=2A / 12V=1.5A (PD18W)

CHARGING BASE INPUT: 9.5V = 1.5A

V10 different usage states

Diagrams showing the vacuum cleaner in different states:

• In the storage state.
• In use, with the dust collector angle adjustable to seven different angles.
• In special circumstances, the dust collector extension tube can be pulled out for use.

Instructions on using the Pivot lock button to adjust the angle and attach different brushes, including pulling out the dust collector extension tube if necessary.

How to assemble (repeated section)

Diagrams illustrating the assembly process again. Text explains to take out the machine, press the Pivot lock button to adjust the dust collector angle, select the brush, and install it on the nozzle. Use a different brush to clean the dust collector.

On/Off button: Press to turn on (light on), then press to turn off (light off).

Speed switch button: Short press to switch to high speed, press again to switch back to low speed. Long press for 1.5 seconds to turn off the lamp.

5. CLEAN AND MAINTENANCE

Diagrams illustrating the cleaning and maintenance steps:

1. Press the dust container release button.
2. Take down the SA Bowl sub-assembly.
3. Take down the filter system.
4. Pull out the filter and clean the filter and pre-filter with a cleaning brush.
5. Clean the pre-filter and filter with clean water.
6. Wash or clean the SA container & Dust collector.
7. Wait for the filter system to dry completely before putting them back into the SA container & Dust collector.
8. Ensure the SA container & Dust collector are completely dry before putting them back.

Note: Do not wash the unit or get the charging port wet. The filter element is recommended to be replaced every 3 months.

6. Wall Mounting

The product can be attached to a wall for convenient storage and charging. Ensure the fixing method is suitable for the wall type and the appliance's weight. Mark screw hole locations within reach of an electrical outlet. The charging base should be installed in a cool, dry place near a power outlet, away from direct sunlight. Use appropriate mounting hardware. Ensure the installation area is clear of pipes, air ducts, and electrical wires. Professional installation with protective gear is recommended. Measure the distance between screw holes, drill holes, insert wall plugs, screw in one screw, hang the charging base on the first screw, and then tighten with the second screw.

Diagrams show the wall mounting process, including screw placement and the charging base. A note indicates that the light will go out when charging is complete.

7. LED Indicator

Table detailing the LED indicator status for the vacuum cleaner:

Table detailing LED indicator status during charging:

8. TOXIC AND HAZARDOUS SUBSTANCES

Table listing hazardous chemicals (Pb, Hg, Cd, Cr (VI), PBB, PBDE) for the Handheld Vacuum Cleaner. All values are marked with 'O', indicating that homogeneous materials' hazardous substances content are below the limit specified in the Standard 2011/65/EU.

9. TROUBLESHOOTING

If the following operations cannot solve your problems, please stop using the device and contact the manufacturer via email: support@fanttik.com.

10. Technical Data

WARRANTY CARD

Your Warranty Includes

• 12-Month Coverage: Within 12 months of purchase, Fanttik will provide timely and effective online after-sales service, repairing or replacing any defective product due to manufacturing fault within the warranty period.

How to Return Your Fanttik Product

• Contact support@fanttik.com with your order number.
• A return label will be issued.
• Tear off the 'Return Details' page, fill in the details, and include it in your return package.
• A replacement/refund will be issued upon receiving the return package.

Return Details

To process returns quickly, please fill out the following information and include it in your return package:

• Purchase Name:
• Order Number:
• Date of Purchase:
• Your Email Address:
• Place of Purchase:

If your purchase was fulfilled by Amazon, please use Amazon's 30-day return service.