CRIUS CO100-G1 Notebook PC Quick Start Guide

1. Product Schematic

This section provides visual representations of the notebook PC. The document displays three views:

• Image 1: Front view of the Notebook PC, showing the screen and keyboard.
• Image 2: Top view of the Notebook PC, highlighting the keyboard layout and trackpad.
• Image 3: Bottom view of the Notebook PC, illustrating ventilation grilles and port placement.

2. Instructions for Use

This section details how to operate and maintain the notebook PC.

2.1 Function Keys

The notebook features 12 function keys (F1-F12) that perform various application-specific functions when pressed in combination with the 'Fn' key:

• Fn + F1: Airplane mode toggle
• Fn + F2: Mute toggle
• Fn + F3: Decrease volume
• Fn + F4: Increase volume
• Fn + F5: Decrease brightness
• Fn + F6: Increase brightness
• Fn + F7: Remote projection screen
• Fn + F8: Always on display
• Fn + F9: Touchpad toggle
• Fn + F10: Projection
• Fn + F11: Lock roll
• Fn + F12: Delete
• Fn + ESC: Enter sleep mode

2.2 Power Supply and Charging

The product can be powered by its internal lithium battery or an AC power adapter. It is recommended to charge the computer using the AC adapter after unpacking.

• Lithium batteries do not have a "memory effect," allowing charging at any time.
• Charging time may be longer if the laptop is used while charging.
• For faster charging, put the computer in standby mode or turn it off.
• To prolong battery life, charging may be limited when the battery level is above 95%.
• Low battery warnings will appear on the screen. Ensure timely charging to prevent data loss.
• Use only the original power adapter to avoid damaging the computer.
• Batteries contain toxic substances and must be recycled according to environmental regulations.

2.3 Cleaning, Maintenance and Storage

Follow these guidelines for cleaning and maintaining the product:

• Turn off the system and unplug the adapter before cleaning.
• Wipe the product shell with a damp cloth and dry with a soft cloth.
• Do not use corrosive cleaning liquids.
• Do not immerse the product in water or other liquids.
• Store the product in a dry, flat environment after cleaning.

3. User Use of the Security Statement

Please read and adhere to the following guidelines to ensure product longevity and safety:

• Ensure vents are not blocked to prevent overheating.
• Do not press the display hard.
• Avoid placing the notebook on uneven or unstable surfaces.
• Use a special bag when traveling with the laptop.
• Do not use the laptop in harsh conditions.
• Do not place or drop objects on the laptop.
• Keep the laptop away from magnetic fields.
• Do not expose the laptop to direct sunlight.
• Avoid using the notebook in extreme temperatures (overheated or overly cold environments).
• Protect the computer from rain or dew.
• Do not place the computer near fire sources or other heat sources.
• Do not tamper with the battery; keep it away from children.
• Protect the notebook from dust and corrosive chemicals.
• Do not force the notebook screen open or use the display to lift the computer.
• Do not spray water or solvents directly onto the notebook display.
• Using non-original batteries or other types of batteries is strictly prohibited due to explosion risk.

4. Troubleshooting

General issues can often be resolved by following these steps:

1. Turn off the laptop.
2. Ensure the AC power adapter is connected to the computer and the power outlet is active.
3. Verify all external devices are connected. You may unplug them to rule them out as a source of error.
4. Before restarting, ensure the laptop has been off for at least 10 seconds and check the boot sequence.

5. Packing List

The package typically includes:

1. Quick start guide *1
2. Adapter *1
3. Notebook computer *1

Regulatory Information

Federal Communication Commission (FCC) Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

FCC Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information

This device meets the government's requirements for exposure to radio waves. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government. The exposure standard uses the Specific Absorption Rate (SAR), with an FCC limit of 1.6W/kg. SAR tests are conducted using standard operating positions accepted by the FCC. The FCC has granted an Equipment Authorization for this device, with all reported SAR levels evaluated as compliant with FCC RF exposure guidelines. SAR information is available on file with the FCC at www.fcc.gov/oet/ea/fccid.

To maintain compliance with RF exposure guidelines, use accessories like belt clips or holsters that do not contain metallic components. Body-worn SAR testing was performed at a 0mm separation distance. For body-worn operation, position the device at least this distance away from the body.

Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems.

Devices operating in the 5150-5350 MHz band are for indoor usage only to reduce potential interference with co-channel mobile satellite systems.

Industry Canada (IC) Radiation Exposure Statement

This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

French translation: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

This EUT complies with SAR for general population/uncontrolled exposure limits in IC RSS-102 and has been tested in accordance with the measurement methods and procedures specified in IEC/IEEE 62209-1528. To maintain compliance with ISED RF exposure requirements, use only belt-clips, holsters, or similar accessories that do not contain metallic components. The use of accessories that do not satisfy these requirements may not comply with ISED RF exposure requirements and should be avoided.

Devices shall not be used for control of or communications with unmanned aircraft systems.

Devices operating in the 5150-5350 MHz band are reserved solely for indoor use to reduce the risk of harmful interference to mobile satellite systems using the same channels.

The frequency range 5600-5650MHz is restricted to transmitting in ISED.

Document Metadata and Revision Information

Parts List Header Template