Introduction to EdgeOS
This guide provides comprehensive instructions for using EdgeOS, the powerful operating system developed by Ubiquiti Networks for managing EdgeRouters and EdgePoints. EdgeOS offers an intuitive web-based configuration interface, as well as a command-line interface (CLI) for advanced configurations.
Explore the features of EdgeOS, including its dashboard, traffic analysis, routing capabilities, firewall and NAT settings, various services like DHCP and DNS, VPN configurations, Quality of Service (QoS) management, and user administration.
For detailed information on hardware overview, installation, and typical deployment scenarios, please refer to the Quick Start Guide included with your EdgeRouter.
Discover how to leverage EdgeOS for efficient network management and optimization.
For more information and support, visit the official Ubiquiti Networks website:
Ubiquiti CommunityUbiquiti Documentation
Key Features and Navigation
- Intuitive Interface: Manage your network through a user-friendly web interface.
- Command Line Interface (CLI): For advanced users, the CLI offers powerful control over network configurations.
- Dashboard: Monitor network status, interfaces, and services at a glance.
- Traffic Analysis: Gain insights into network traffic patterns and identify high-bandwidth hosts.
- Routing: Configure static routes and OSPF for efficient network routing.
- Firewall & NAT: Implement robust security policies with port forwarding, firewall rules, and NAT configurations.
- Services: Manage DHCP servers, DNS forwarding, and PPPoE connections.
- VPN: Set up secure VPN connections using PPTP and IPsec.
- QoS: Optimize network performance with intelligent queue management.
- User Management: Control user access and permissions for enhanced security.
- Toolbox: Access essential network tools like Ping, Traceroute, and Packet Capture.
System Requirements
To access the EdgeOS configuration interface, you will need:
- Operating System: Microsoft Windows 7/8/10, Linux, or Mac OS X.
- Web Browser: Google Chrome, Mozilla Firefox, Safari 7+, Microsoft Edge, or Internet Explorer 10+.
Getting Started
Connect your computer to the EdgeRouter using an Ethernet cable and access the web interface via its IP address (default: https://192.168.1.1). Log in with the default credentials (ubnt/ubnt) and accept the license agreement to begin configuring your network.
