Teufel REAL BLUE PRO Quick Start Guide

Teufel Headphones App

Download the Teufel Headphones App to your smartphone to access additional features and settings.

Pairing

1. First-time use: Press and hold the power button [1.5s] to turn on the headphones. Bluetooth Pairing Mode activates automatically, indicated by the LED flashing blue rapidly.
2. Enable Bluetooth on your device to search for and pair with "Teufel REAL BLUE PRO". Upon successful connection, the LED remains solid blue for 10 seconds.
3. Connect with a new device: With headphones on, double-press the power button. The LED will flash blue to indicate Bluetooth Pairing mode.

Note: Audio latency effects may be noticeable with certain mobile phones during Bluetooth operation.

ShareMe Functionality

ShareMe allows simultaneous wireless music listening between two ShareMe-equipped headphones. If one headphone is connected to a Bluetooth device, follow these steps:

1. Press the Power Button [1] and the Center Button of the Joystick [7] simultaneously. The LED will flash purple rapidly.
2. Start ShareMe on another headphone by pressing the Power Button [1] and the Center Button of the Joystick [7] simultaneously. When the two headphones connect, the LED will be solid purple for 10 seconds.
3. To disconnect ShareMe, press the Power Button [1] and the Center Button of the Joystick [7] simultaneously while ShareMe is active.

Headphone Controls

The Teufel REAL BLUE PRO headphones feature intuitive controls:

Power Button [1]

• On/Off: Press and hold for 1.5 seconds.
• Bluetooth Pairing: Double-press.
• Clear Device List: Press and hold for 8 seconds.

Joystick [7]

• Play/Pause: Press the center button.
• Voice Assistant: Press and hold the center button.
• Accept/End Call: Press the center button.
• Reject Call: Press and hold the center button.
• ShareMe: Press Power Button [1] and Center Button of Joystick [7] simultaneously.
• Volume Up: Press up on the joystick.
• Volume Down: Press down on the joystick.
• Previous Track: Press left on the joystick.
• Next Track: Press right on the joystick.

Touch Panel [2, 6]

• Transparency Toggle: Double-tap the touch panel.
• Dynamore On/Off: Triple-tap the touch panel.

ANC Button [9]

• ANC Levels: Short press cycles through ANC 3 [High], ANC 2 [Mid], ANC 1 [Low].
• Transparency Mode: Short press cycles to Transparency.
• ANC/Transparency Off: Press and hold for 1.5 seconds.
• Reset: Press and hold Power Button [1] and ANC Button [9] simultaneously for 4 seconds.

Active Noise Cancellation (ANC) and Transparency Mode

ANC Mode

Enjoy immersive sound in noisy environments. Short pressing the ANC Button [9] cycles through three levels: ANC High (indicated by a Cyan LED), ANC Mid (Green LED), and ANC Low (Lime Green LED). To deactivate ANC, press and hold the ANC button [9] for 1.5 seconds; the LED will turn grey (low brightness). The number of ANC modes can be customized in the Teufel Headphones App.

Transparency Mode

Stay aware of your surroundings while listening to audio. Double-tap the touch panel [2 or 6] or short press the ANC button [9] to activate Transparency Mode (indicated by a solid White LED). External sounds are mixed with your music, allowing you to hear conversations or announcements. During calls, this mode helps you hear your own voice. Double-tap the touch panel again to return to your previous mode.

Dynamore® Technology

Dynamore enhances the stereo image for a wider soundscape. Triple-tap the touch panel [2 or 6] to activate Dynamore (status LED pulses white once). Triple-tap again to deactivate Dynamore (status LED pulses white twice).

Wear Detection and Hearing Correction

Wear Detection

Playback automatically pauses when the headphones are removed and resumes when they are worn again. This feature can be enabled or disabled in the Teufel Headphones App.

Mimi Sound Personalization

Personalize your audio experience by testing your unique hearing profile with Mimi through the Teufel Headphones App.

Charging and Battery Status

Connect the included USB-C cable to the USB-C port [4] and a PC or USB power adapter for charging. A short press of the power button displays the battery status.

Battery Status LED Indicators

• 0-20%: Slow flashing red LED.
• 21-59%: Solid yellow LED.
• 60-100%: Solid white LED.

The status LED pulses red when the battery is low. During charging, it pulses yellow. When fully charged, the LED is solid white.

Technical Specifications

Battery

Type: Lithium-Polymer, 3.7V, 800mAh

Radio Frequency

Network: Bluetooth®

Frequency Bands: 2400 – 2483.5 MHz

Transmission Power: < 10 mW / < 10 dBm

Compliance

Teufel REAL BLUE PRO complies with Directive 2014/53/EU. The full EU declaration of conformity is available at: www.teufel.de/konformitaetserklaerungen and www.teufelaudio.com/declaration-of-conformity.