Victron Battery Monitor and Orion DC/DC Charger Settings

Victron Battery Monitor Settings

Battery type: Set to the purchased battery type e.g. Lithium, AGM, etc...

Charge Voltage / Absorption Voltage / Equalisation Voltage: Lithium 14.2 V – AGM 14.6 V

Tail Current: 3% of Battery Capacity

Maximum Absorption Time: 1hr for Lithium 8 hrs with AGM (if applicable with charger)

Restart Charge Voltage: Lithium 13.2 V – AGM 12.8 V (if applicable with charger)

Float Voltage: Lithium 13.5 V or disable if possible – AGM 13.2 V

Re-Bulk Offset: 0.3V

Load output: OFF if unused

!!!For Lithium disable Equalisation Charge!!! If not possible set Equalisation charge Voltage as low as possible. (If applicable with charger)

	Victron NG Lithium Battery System Diagrams This document provides system diagrams for Victron NG Lithium batteries, illustrating various configurations for small and large systems, including those with alternators, solar panels, and inverters.
	Solar System Design and Wiring Diagram A detailed wiring diagram for a solar power system featuring Victron Multiplus II, JA Solar panels, and MPPT charge controllers, outlining AC and DC connections, breaker configurations, and panel array layouts for East and West facing installations.
	Victron MPPT 75/10 Solar Charge Controller with Bluetooth Information on the Victron MPPT 75/10 solar charge controller, featuring ultra-fast Maximum Power Point Tracking, Bluetooth connectivity, and various protection mechanisms for efficient solar energy harvesting.
	RemoteGPIO Communication Module Integration Guide Guide to integrating custom communication modules with Victron's Venus OS using the RemoteGPIO system. Details driver architecture, file structure, service management, and internal MQTT API for device registration, status updates, input/output handling, and relay control.