Product Manual Sp/lit
Products Overview
This section provides an overview of the Sp/lit product, including the CD player, USB cable, and warranty card.
Screen Display and Key Description
The screen display shows track number, play time, and mode. Key functions include Power/Play Mode, Player Mode, Stop, CD Play Mode, Previous Track, Next Track, and Volume Control.
Play status display: Indicates playback status.
Play mode/Player mode: Allows switching between CD play mode and Bluetooth modes.
CD play mode: Supports Repeat One (EPI), Repeat All (EPALL), Repeat Off (EPOFF), and Random (RND) modes.
Volume Control/Power Control: Used for adjusting volume and powering the device on/off.
MODE button: Switches between CD Play, Bluetooth Input, and Bluetooth Output modes.
CD Player & Speaker All in One - Button Description
Power on/power off: Hold the power button.
Pause/play: Press the power button.
Reset the Bluetooth: Double-click the power button.
Volume+/Volume-: Rotate the volume knob.
Display: Shows track & play time/total time, CD play/Bluetooth input/Bluetooth output modes, and CD play modes (random/repeat one/repeat all/repeat off).
CD PLAY: Press the MODE button to switch to CD PLAY mode.
Bluetooth pair: Press the MODE button to switch to BT-OUT mode to pair with external Bluetooth speakers.
Bluetooth output: Connects to external Bluetooth devices.
CD Player Button Description
Power On/Power Off: Hold the MODE button.
CD Play: Tap the MODE button.
Bluetooth Pair: Tap the MODE button to enter BT-OUT mode to pair with external Bluetooth speakers.
Display: Shows track & play time/total time, CD play/Bluetooth input/Bluetooth output modes, and CD play modes (random/repeat one/repeat all/repeat off).
State Display: Indicates the on/off state.
Key Function:
- CD play: Hold the STOP button, press PLAY/PAUSE, double-click to switch CD play mode (repeat single/all, random, repeat off).
- Dc in: When the SPLIT host is not connected to the SPLIT speaker, use the included external USB power cable for power supply.
- Wired Connection: Plug external headphones or speakers cables into the SPLIT host headphone jack.
Wireless connection to external Bluetooth speaker devices
- Press the MODE button to enter BT-OUT mode.
- Turn on the external speaker and adjust to Bluetooth pairing status.
- Bluetooth connection successful.
Wireless connection to SPLIT
- Press the MODE button to switch to BT-OUT mode.
- Turn on the power. Verify that the speaker is in Bluetooth pairing mode (blue light flashes).
- Bluetooth connection successful.
Bluetooth speaker Association
Charging: The Bluetooth speaker has a 2000 mAh lithium battery and can be recharged via the supplied TYPE-C cable.
Indicator Light Status Display: Shows the on/off state and Bluetooth input status.
Power on/Power Off play/Pause: Hold or press the rotary switch.
Reset the Bluetooth: Double-click the rotary switch.
Control Volume: Rotate the rotary switch to control the volume.
Bluetooth speaker Independent Use
- Automatically enter Bluetooth search mode after power on. The indicator light is on and the blue light is flashing.
- Mobile phone connection: Bluetooth signal "SPLIT".
Main Specifications
| Specification | Details |
|---|---|
| Supported formats | CD-DA/MP3 (CDR-RW), MP3 (32-320k bps) |
| Bluetooth output protocol | SBC and AAC |
| Output (main unit) | 3.5mm stereo audio output jack/Bluetooth 5.3 |
| Power Supply | DC5V/2A TYPE-C interface/built-in battery 2000mAh |
| Maximum external dimensions | 230mm*138mm*35mm |
| Mass | 595g |
| Accessories | TYPE-C power cable *1, CD player *1 |
| Power | 5W, standby power 0.5W |
*This product does not support the use of dry batteries.
Safety Precautions
- Only CD discs containing the logo shown at the right can be played on this set.
- Do not stick a label etc. on a disc.
- Do not heat discs.
- Do not use this apparatus near water.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Do not place heavy objects on the CD player.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not install near strong magnetic fields or electrical sources.
- Do not spray flammable insecticides near the unit.
- Must recycle the processing battery correctly.
- Do not place the battery in a place where it is exposed to strong light or where the fire source is overheated.
Issues & Solutions
| Issue | Solution |
|---|---|
| Unable to power on, power indicator is not lit. | Please use a TYPE-C cable to connect an external power source to activate the battery. |
| The speaker has no sound. | Please press the MODE button to confirm if it's in CD mode (No sound in BT-OUT mode). Low battery level, please charge promptly. |
| Skipping sound occurs at maximum volume during CD playback. | Low battery level, please charge promptly. |
| After connecting the headphones, the volume is low. | Please press and hold the button to increase the volume. |
| The screen displays "." | Please press and hold the button to increase the volume. |
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
The device must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.