Help Guide | Top
Foxtech Map-A7R II Full-Frame Camera for UAV Survey and Mappingfoxtechfpv.com/product/cameras/map-a7r-2/imaging_edge_mobile_7.6.0.apk
User Manual for FOXTECH models including: Map-A7RII, Full-Frame Mapping Camera, Map-A7RII Full-Frame Mapping Camera
support and user manual. It is recommended that you download and use the latest version of the user manual. This ... Imaging Edge Mobile for Android.
Foxtech Map-A7R II Full-Frame Camera for UAV Survey and Mapping
File Info : application/pdf, 9 Pages, 1.60MB
DocumentDocumentMap-A7R II Full-Frame Mapping Camera User Manual V1.0 2021.12 Contents Description..................................................................................................... 1 Disclaimer................................................................................................. 1 Intellectual Property................................................................................ 1 Specification.................................................................................................. 2 Interface Definition.......................................................................................3 Operating Instructions................................................................................ 6 Camera Shutter Setting.............................................................................. 6 Triggered by Relay..................................................................................6 Triggered by PWM signal.......................................................................6 Description Map-A7R II Full-Frame Mapping Camera User Manual Disclaimer Thank you for purchasing this product. You can log in to the website for the latest product information, technical support and user manual. It is recommended that you download and use the latest version of the user manual. This manual is subject to change without notice. You can also get product usage information or technical support through official customer service. Due to different production batches, the appearance or function parameters are slightly different and will not affect the normal use of the product. Please read this statement carefully before using. Once used, it is deemed to be an endorsement and acceptance of the entire contents of this statement. Please read the instruction manual carefully and strictly follow the instructions in this manual to use this product. Foxtech will not be liable for any result or loss caused by improper use, installation, assembly or modification of users. Intellectual Property The intellectual property rights of this product and manual are owned by Foxtech. Any organization or individual may not copy, reproduce or distribute in any form without written permission. If you need to quote, you need to indicate the source, and you should not make any modifications, deletions and references to this manual. ©2021 FOXTECH All Rights Reserved 1 Specification Product Pixels pixel size Minimum exposure time Sensor size Hot shoes for PPK Image size(pixels) Shutter speed Size Lens Power weight Parameter Setting Date reading Map-A7R II Full-Frame Mapping Camera User Manual A7R 42.2 mega pixels 4.5m 0.8s 35.8*23.9mm Support 7952*5304 30--1/8000 95mm*75mm*43mm 35mm/40mm/56mm 7.2-8.6V 219g(Standard),234g(PSDK) Button/USB USB/SD card ©2021 FOXTECH All Rights Reserved 2 Interface Definition Map-A7R II Full-Frame Mapping Camera User Manual No. Description 1 POS Card 2 Screen 3 SkyPort 4 Restart/Save No. Description 5 Setting 6 HDMI/USB 7 SD Card 8 Menu ©2021 FOXTECH All Rights Reserved 3 Map-A7R II Full-Frame Mapping Camera User Manual Power out+ GND Hot Shoe for PPK Shutter Wire GND Shutter Wire Manually shooting key Power Module Power in+ GND Power Input 7.2-8.6V ©2021 FOXTECH All Rights Reserved 4 Map-A7R II Full-Frame Mapping Camera User Manual Power in+(5V) PWM input GND PWM module PWM Module Relay Module PPK(Insert into the flight controller) PWM input GND ©2021 FOXTECH All Rights Reserved 5 Map-A7R II Full-Frame Mapping Camera User Manual Operating Instructions 1. The camera will take a picture automatically, then it can be used via flight controller or manually. 2. If the memory card is used for the first time. After camera self-check, insert the memory card into the camera and click "OK" button to format, then it can be used normally. 3. When debugging the camera, it is recommended to connect the camera to the monitor or TV using HDMI wire. Camera Shutter Setting Triggered by Relay 1. Connect the shutter release cable to AUX OUT 5 on flight controller. If there is no PPK module, connect the PPK cable to AUX OUT 6 on flight controller. 2. Connect the flight controller to the computer using USB or other data links and open the mission planner. 3. Proceed to the CONFIG > FULL PARAMETER LIST and locate the CAM_TRIGG_TYPE parameter. This parameter must show as "1". If it is not set to 1, change this parameter to 1 before proceeding to the next step. 4. Locate the BRD_PWM_COUNT parameter in the same category, and set it to "4", meaning that only the top four of AUX ports will emit PWM signal. 5. Locate the RELAY_PIN in the same category and set its value to "54" which means the shutter release cable connects to the flight controller via AUX OUT 5. 6. Locate the CAM_FEEDBACK_PIN parameter in the same category, and set it to "55", which means the PPK module connects to flight controller via AUX OUT 6. Triggered by PWM signal 1. Connect the shutter release cable to AUX OUT 5 on flight controller. If there is no PPK module, connect the PPK cable to AUX OUT 6 on flight controller. 2. Connect the flight controller to the computer using USB or other data links and open the mission planner. 3. Proceed to the CONFIG > FULL PARAMETER LIST and reset these four parameters: 4. Set the value of BRD_PWM_COUNT in the same category to "5", meaning that only the top five of AUX ports will emit PWM signal. ©2021 FOXTECH All Rights Reserved 6 Map-A7R II Full-Frame Mapping Camera User Manual 5. Locate the SERVO13_FUNCTION in the same category and set its value to "10" which means the shutter release cable connects to the flight controller 13 port. 6. Locate the CAM_FEEDBACK_PIN parameter in the same category, and set it to "55", which means the PPK module connects to flight controller via AUX OUT 6. Setting camera on APP and PC https://helpguide.sony.net/ilc/1520/v1/en/index.html Imaging Edge Mobile for Android https://www.foxtechfpv.com/product/cameras/map-a7r-2/imaging_edge_mobile _7.6.0.apk Please download Imaging Edge Mobile(for IOS) in APP Store. This content is subject to change. Download the latest version from https://www.foxtechfpv.com/foxtech-map-a7r-ii-full-frame-mapping-camera.html For everyday updates, please follow Foxtech Facebook page: https://www.facebook.com/foxtechhobby YouTube Channel: https://www.youtube.com/user/foxtechonline/featured?view_as=subscribe ©2021 FOXTECH All Rights Reserved 7