Important Safety Instructions

WARNING: Risk of Injury, Fire, and Electric Shock.

Operating Machine in a manner not prescribed in the enclosed instructions, online instructions, and other official Cricut materials may result in damage to the Machine, property damage, injury, or even death.

Please note the following safety-related symbol appears on the Machine and Power Supply. ⚠️

• For Indoor Use Only. Machine is to be used in dry indoor locations only.
• Machine is intended to be operated by an adult only. Not intended for use by children 12 years or under. Always supervise children around Machine.
• Use Machine only for its intended crafting purpose.
• Machine is not intended for use by persons with reduced physical, sensory or cognitive capabilities, or lack of experience and knowledge, unless they are supervised by a person responsible for their safety and familiar with the safe operation of Machine.
• Disconnect the electrical power when not in use by unplugging cord from outlet.
• Disconnect the electrical power by unplugging cord from the outlet before servicing or cleaning.
• Do not expose Machine to temperatures above 38°C (100°F).
• Only clean Machine with a soft cloth dampened with glass cleaner or water. Never use any kind of flammable liquid to clean Machine. Do not use solvents such as acetone or nail polish remover to clean Machine as these will permanently damage Machine's surfaces.
• Always unplug Machine before replacing the cutting blade. Blades are extremely sharp and should be handled with caution and extreme care. Prevent blade contact with hands and body to avoid injury. Do not allow children to handle blades. Blades and other small parts are choking hazards and should be kept and stored away from children.
• Do not open, modify, or otherwise tamper with Machine.
• Do not operate if Machine or cord is damaged. Contact Cricut Member Care for service: cricut.com/contact or USA and Canada: 1-877-727-4288 / Mexico: 0800-266-0135.
• Use only Cricut approved power adapters. Always turn Machine OFF before unplugging from the electrical outlet. Never pull on the cord to disconnect Machine from the electrical outlet; instead, grasp the plug and pull to disconnect Machine.
• Machine has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
• The power cord should be positioned so that it will not drape over the countertop or tabletop where it can be tripped over, snagged, or pulled on unintentionally (especially by children).
• Place Machine on a strong, flat, level, and stable surface. Make sure your work space has enough space in the front and back of Machine to allow the cutting mat to move through Machine freely.
• Do not place your fingers or other objects in Machine while connected to electrical power, or while Machine is powered on, or during cutting operations.
• Keep hair, jewelry, loose clothing, fingers, other body parts, and any other items that could get caught in the moving parts away from Machine while it is operating as the rapid movements of the cutting carriage, mat, and material during operation may cause injury.
• Do not touch the mat or material during cutting even if the mat or material stops moving. Do not touch the mat or material until Machine ejects the mat or material from Machine.
• Machine should never be left or stored outside, in unheated or unairconditioned spaces, or in environments where Machine can come in contact with water.

Model: CXPL203

Specifications: 100-240 V~, 1.6 A, 50/60 Hz