BLUETOOTH AUDIO ADAPTOR (RECEIVER)

Introduction

Thanks for choosing our BLUETOOTH AUDIO ADAPTOR (RECEIVER). This device allows you to hear phone music and calls from your car radio. Place it on the car dashboard to make operation easier. With a built-in 150mAh rechargeable battery, it can be fully charged within 2 hours and provides up to 10 hours of working time. To have a better experience, please read this instruction carefully.

Packing Contents

• Retrofit Audio Controller
• 3.5mm Audio Cable
• Micro USB Charging Cable
• Hook & Loop Fastener
• User Guide
• Optional: 3.5mm to 3.5mm audio plug

Features

• Advanced Bluetooth Technology V5.1
• Support A2DP, AVRCP, HFP
• Mini audio remote control for streaming music or phone calls
• Built-in 150mAh battery, providing up to 10 hours working time.
• 3.5mm Aux Jack for line-out function
• Compatible with activation of Siri/Google assistant for iOS/Android
• Switch to hands-free mode automatically from music playing status when receiving calls.

Specifications

Compatibility

This device can be paired as a hands-free kit with any compatible Bluetooth-enabled devices. Each time, it can only be connected with one Bluetooth device.

Precautions

Please read all safety instruction warnings carefully before using this product. Improper use of this product may result in damage to this or attached products. To ensure the products work well, please never use this in the following conditions:

• Moist or underwater conditions.
• Conditions near heater or high-temperature service.
• Conditions with direct and strong sunshine.
• Never dismantle the product without due permission, otherwise it may nullify the warranty clause.

Appearance

The device is a compact, circular unit. Key features and ports are located as follows:

• 3.5mm AUX Port: Located on one side for audio output.
• Micro USB Charging Port: Located on the top side for charging, with input specifications of 5V/280mA.
• Central Multi-function Button: The main control on the top surface, labeled with a phone icon, functions as [Play/Pause/Answer/Hang Up Button].
• Directional Buttons: '<' [Volume Down Button] and '>' [Volume Up Button] are located around the central button for volume control and track skipping.
• Microphone: Integrated into the device.
• LED Indicator: A light on the front indicates status.
• Bass Booster / Siri/Google Assistant Activation: Functionality indicated on the top surface.
• Power Button: Located on the side for powering the device on/off.

Operation Instructions

Using the Music Streaming Function:

1. Attach the product onto the car dashboard (using the hook) or simply connect it to your old speaker/DVD player/wired earphones via the 3.5mm audio cable or the optional 3.5mm to 3.5mm audio plug.
2. Press and hold the [Power Button] to power on/off the device.
3. Pair this product with your mobile phone/tablet/gaming console via Bluetooth.
4. Turn on your music and enjoy the crystal audio sounds from the car stereo/old speaker/DVD player/wired earphones.
5. Press the [Central Multi-function Button] once to Play/Pause.

Using the Hands-Free Function:

1. Press the [Central Multi-function Button] once to Answer/Hang off the phone call when there is an incoming call.
2. Press and hold the [Central Multi-function Button] for 3 seconds to reject the phone call.
3. Press the [Central Multi-function Button] twice to redial the last phone call.
4. Press and hold the [Central Multi-function Button] for 3 seconds during a conversation to switch to a private call.

How to Activate Siri/Google Assistant

When the device is connected to your mobile phone by Bluetooth, long press the [Central Multi-function Button] to activate Siri or Google Assistant.

Charging the Bluetooth Receiver

1. When the battery power is low, the indicator light flashes red.
2. Charge this Bluetooth receiver with the Micro USB charging cable included in the package.
3. In the charging status, the indicator is solid red and turns off when the device is fully charged.
4. When powered on, the unit will automatically power off if there is no operation for 10 minutes.

Federal Communications Commission (FCC) Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications made to this device not expressly approved by SAGE HUMAN ELECTRONICS INTERNATIONAL CO., LTD. may void the FCC authorization to operate this device. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

RF Exposure Statement

The transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 5mm between the radiator and any part of your body.