Withings ScanWatch Horizon

Thank You

Thank you for choosing Withings ScanWatch.

Box Contents

The box contains the following items:

• ScanWatch: The main smartwatch device.
• Fluoroeastomer Wristband: A flexible wristband.
• Charging Cable: A magnetic charging puck with a USB connector.
• Band Toolkit: Includes a hammer, pin punch, and a holder for adjusting metal wristbands.

Diagram Description: The box contents are illustrated with line drawings showing the ScanWatch, a fluoroelastomer wristband, a charging cable with its puck, a pin punch, a hammer, and a band holder.

Quick Start

To get started, visit go.withings.com to download the companion app and follow the on-screen instructions.

Diagram Description: A smartphone screen displays the ScanWatch interface with 'Learn more' and 'Install' buttons, indicating the app installation process.

Product Installation

Install your watch using the app and follow the guide to discover all the functionalities of your product.

Diagram Description: Similar to the Quick Start diagram, a smartphone shows the ScanWatch app interface, guiding the user through product installation.

How to Wear ScanWatch

The wristband should be comfortably tight and worn approximately 1 cm away from the wrist bone for optimal sensor performance.

Diagram Description: A line drawing of a wrist wearing the ScanWatch, with dashed lines indicating a measurement of 1 cm from the wrist bone to the watch strap.

How to Charge ScanWatch

Recharge using the cable found inside the box. The battery life is up to 30 days, with an additional 20 days in power reserve mode (tracking time and activity only).

Diagram Description: Two steps illustrate the charging process. Step 1 shows the charging cable connected to the watch. Step 2 shows the watch placed on the charging puck, which is connected to a power source.

Overview

The ScanWatch has several key components:

• A) WRISTBAND: The strap that secures the watch to your wrist.
• B) ROTATING BEZEL: Used for navigation and selecting options.
• C) DISPLAY: The watch face showing information and notifications.
• D) ACTIVITY DIAL: A sub-dial that tracks activity progress.
• E) HEART RATE & SpO2 SENSOR: Located on the back of the watch, used for measuring heart rate and blood oxygen levels.

Diagram Description: Line drawings show the front and back of the ScanWatch with parts labeled A through E, corresponding to the descriptions above.

Band Toolkit

This toolkit is suitable for adjusting metal wristbands with a folding clasp.

Instructions for adjusting the wristband:

1. Estimate the number of links to remove by wearing the watch on your wrist. Note that one link is smaller to allow for finer adjustments.
2. Position the wristband in the holder, ensuring the arrows inside the band point downward.
3. Use the pin punch and hammer to push out the pin supporting the mesh link you wish to remove.
4. Remove the second pin and then the mesh link. Repeat if necessary.
5. Reassemble the wristband by replacing the pins in the opposite direction of the arrows using the hammer.

Diagram Description: Multiple diagrams illustrate the band adjustment process: showing the toolkit components, placing the band in the holder, using the pin punch and hammer to remove pins, and reassembling the band. Arrows indicate the direction of pin insertion/removal.

Warranty

Withings offers limited warranties for the ScanWatch. Specific terms vary by region:

• US: One (1) Year limited warranty against defects in materials and workmanship.
• UK: Two (2) Year commercial guarantee against defects in materials and workmanship.
• FR/ES/IT/CZ: Commercial guarantees ranging from 1 to 2 years against material and workmanship defects, provided normal usage and adherence to guidelines.

Withings does not warrant uninterrupted or error-free operation and is not responsible for damage from failure to follow instructions.

Information to Users in Canada

This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standards. Operation is subject to two conditions: no harmful interference, and acceptance of any received interference. Unauthorized modifications may void FCC authorization. The device's radiated output power is well below FCC exposure limits, and it should be used to minimize potential human contact.

Materials

Materials potentially in contact with the skin during usage include: Fluoroelastomer, silicone, leather, sapphire glass, and stainless steel.

Need Help?

For assistance, please visit withings.com/support/scanwatch. This site also provides cleaning instructions.

Declaration of Conformity

Withings declares that the ScanWatch is in conformity with the essential requirements and other relevant requirements of Directive 2014/53/EU. The declaration of conformity can be found at: withings.com/compliance.

Recycling Information

The crossed-out wheeled bin symbol on the product indicates it is classified as electrical and electronic equipment. It should not be mixed with household waste and must be taken to dedicated collection points for proper treatment, recovery, and recycling.

Technical Specifications

Frequency Range: 2402.0 - 2480.0 MHz

Maximum output power: -0.8 dBm