AceGamer Pocket Controller
N-S/PC/iOS/Android Wireless Controller
Brand Logo: A stylized rocket ship in blue and orange with the text "ACEGAMER" and Chinese characters "艾斯玩家".
Product Description
This product is a wireless game controller featuring an N-S button layout. It is adapted for N-S/N-S OLED/N-S Lite consoles and PC's X-input mode. The controller supports both N-S and X-INPUT mode switching. It includes a built-in six-axis gyroscope for fast and accurate target locking, high-precision joysticks, and dual button vibration motors. Features include console wake-up, continuous firing, and adjustable firing speed. It supports iOS and Android platform devices.
Key Icons and Layout
The controller features a comprehensive layout:
- Left Analog Stick (L): Press down for L3 function.
- Right Analog Stick (R): Press down for R3 function.
- Directional Pad (D-pad): Up, Down, Left, Right controls.
- Face Buttons: A, B, X, Y.
- Shoulder Buttons: L, R.
- Triggers: ZL, ZR.
- Home Button: Central button for system interaction.
- Turbo Button: For setting rapid fire.
- LED Indicators (LED1-4): Display connection and status information.
- Screenshot Key: For capturing gameplay.
- Mode Switching Switches: Located on the top edge to select between N-S and X-input modes.
- Rocker Lift Switches: Located on the back of the controller, used to adjust joystick height.
Diagram Description: The controller is depicted from the top, showing the placement of analog sticks, D-pad, face buttons (ABXY), shoulder buttons (L, R), triggers (ZL, ZR), Home button, Turbo button, LED indicators, and Screenshot key. A separate view shows the Rocker Lift Switches on the back.
Product Parameters
| Parameter | Value |
|---|---|
| Input voltage | DC 5.0V |
| Operating current | ≤ 25 mA |
| Sleep current | < 20 uA |
| Battery capacity | 400 mAh |
| Operating time | About 8 hours |
| Weight | 96 ± 2g |
| Charging time | About 2 hours |
| Vibration current | ≤ 100 mA |
| Charging current | About 230 mA |
| Data cable | Type-C |
| Wireless connection distance | < 10 m |
| Dimensions | 121 x 67 x 32 mm |
Connectivity Modes
N-S Mode
Push the mode switch on the top of the controller to the "S" position to enter the N-S mode.
Wired Connection
Connect the controller to the base of the N-S console via USB cable. Press any key to connect. The console will assign a channel light to the controller, which will remain on for a long time.
Bluetooth Connection
For first-time use, charge the controller. Long press the controller's HOME button for about 3 seconds to turn it on; the LED1-4 lights will flash back and forth (2Hz). Release the HOME button, turn on the N-S console to the pairing interface, and perform Bluetooth pairing. Upon successful pairing, the console will assign a channel light to the controller. If pairing is unsuccessful, the controller will hibernate after 60 seconds.
Wired Connection to PC
Connect the controller to a PC via USB cable. LED1 will light up after a successful connection.
Bluetooth Connection to PC
Long press the controller's HOME button for about 3 seconds to power on; the LED1-4 lights will flash back and forth (2Hz). Release the HOME button, open the PC Bluetooth pairing interface, and perform Bluetooth pairing. Upon successful pairing, controller LED1 will light up. If pairing is unsuccessful, the controller will hibernate after 60 seconds.
Note: Supports wired guide Bluetooth docking. After connecting to the N-S console via USB cable and unplugging it, the controller will automatically connect via Bluetooth.
X-input Mode
Push the mode switch on the top of the controller to the "X" position to enter X-input mode.
Wired Connection
Connect the controller to a PC via USB cable. Controller LED1-2 will light up after connection.
Bluetooth Connection
For first-time use, charge the controller. Long press the controller's HOME button for about 3 seconds to power on; LED1-4 lights will flash back and forth (2Hz). Release the HOME button, open the PC Bluetooth pairing interface, and perform Bluetooth pairing. Controller LED1-2 will light up long after successful pairing. If pairing is unsuccessful, the controller will hibernate after 60 seconds.
Note: PC platform N-S mode device name: Pro Controller. X-input mode device name: Xbox 360 Controller. VID PID are according to the original controller.
Note: ① In wired connection, pull the switch to the desired mode; the controller connects to the existing device. ② In Bluetooth connection, pull the switch to the desired mode; the controller switches modes and connects back to the device in that mode, with the running light flashing back and forth slowly (1Hz).
iOS Connection
Wireless connection (mode switch can be paired in both "X" and "S" positions). Press and hold the "B" + "Home" buttons for about 3 seconds. When the controller powers on, LED1 and LED3 lights flash. Release the buttons, open the mobile phone's wireless pairing interface, and select "DUALSHOCK 4 Wireless Controller" for pairing. Upon successful pairing, LED1 and LED3 lights will remain on. If pairing is unsuccessful, the controller will sleep automatically after 60 seconds.
Android Connection
Wireless connection (mode switch can be paired in both "X" and "S" positions). Press and hold the "A" + "Home" buttons for about 3 seconds. When the controller powers on, LED2 and LED4 lights flash. Release the buttons, open the mobile phone's wireless pairing interface, and select "Pocket Controller" for pairing. Upon successful pairing, LED2 and LED4 lights will remain on. If pairing is unsuccessful, the controller will sleep automatically after 60 seconds.
Functions
Turbo Function
To set Turbo: Press a function key while holding the "TURBO" key, release both, then press them again. To activate continuous function: Hold down the "TURBO" key and press the function key. The key will then send out the function automatically. To cancel, repeat the steps. Turbo settings are not saved after shutdown/restart.
Buttons supporting Turbo function: A, B, X, Y, L, R, ZL, ZR.
Turbo speed adjustment: Hold down Turbo + push the right stick up/down to adjust speed from 5Hz to 12Hz (-20Hz adjustable). Default is 12Hz.
A/B X/Y Key Value Interchange
In X-input mode, press and hold Turbo + Shotshot key for 3 seconds. The controller will vibrate for 1 second, swapping controller A/B X/Y key values. After swapping, shutdown and reboot without saving; the controller defaults to N-S layout key values.
Six-axis Gyro Calibration
With the controller off, long press B + [-] + HOME key for 2 seconds to enter calibration. The channel light will be on and change from a running light (1Hz) to left/right swing flashing (1Hz). Place the controller flat, then press the [+] key to start calibration. After 1 second, calibration is successful, and LED1-4 light up for 1 second before exiting calibration mode and hibernating.
HOME Button Operation
- In hibernation state: Short press "HOME" key. Controller powers on, LED1-4 running lights flash slowly (1Hz), reconnecting to the last wireless device.
- In hibernation state: Long press "HOME" key for about 3 seconds. Controller powers on with LED1-4 "Happy Train" light blinking quickly (2Hz) for wireless pairing.
- Under power-on state: Press and hold "HOME" button for about 5 seconds. Controller shuts down and enters hibernation.
- When in N-S mode and connected to N-S host: If the console hibernates, pressing the controller's "HOME" button wakes up the console.
- If the controller is abnormal: Reset by long pressing the "HOME" button for 10 seconds.
Rocker Lift Operation
To lower the joystick: Flick the rocker lift switch on the back of the controller in the direction of the triangular arrow and press the corresponding position of the joystick simultaneously. To raise the joystick: Operate the rocker lift switch again.
Diagram Description: Shows a hand flicking a switch with a triangular arrow, followed by pressing down on an analog stick to lower it. The reverse action is implied for raising.
Motor Vibration Regulation
When the handle is connected, hold down the "TURBO" key and operate the left 3D stick up/down simultaneously to adjust vibration intensity. Options are 100%, 70%, 30%, 0%. Adjustment settings are saved when the handle is turned off. Factory setting is 70% gear.
Gyroscope Mapping Rocker
To map gyro to left rocker: Press "screen capture key" + "L3" key simultaneously. Press again to cancel. To map gyro to right joystick: Press "screen capture key" + "R3" key simultaneously. Press again to cancel. Turning off the handle does not save these settings.
Power Management
Power Off/Charging/Low Battery Alarm
| Statuses | Instruction |
|---|---|
| Power off | The controller will sleep if not used within 5 minutes when connected to a computer (does not sleep in full auto-turbo mode). When the console screen turns off, the controller automatically turns off the computer and sleeps. It will automatically shut down and hibernate when the console screen is turned off. If the controller fails to reconnect within 20 seconds after being reconnected, it will automatically shut down and sleep. When the controller is turned on, press and hold the HOME button for about 5 seconds to turn it off and enter hibernation. |
| Recharge | When charging with a power adapter, channel lights blink and turn off when fully charged. When charging in a connected state, the corresponding channel light blinks slowly and lights up when fully charged. |
| Low Battery Alarm | When the controller battery voltage is lower than 3.3V, the corresponding channel light flashes to indicate low battery and need for recharge. |
GameMacro APP
Installation: Users can search and download the app from Google Play Store (Android) or Apple Store (iOS). After installation, turn on the joystick and set it to Bluetooth pairing state. Then, turn on your cell phone's Bluetooth switch.
Connection: Find the gamepad's wireless device in your cell phone's wireless list. Pair and connect the gamepad. The wireless name "GameMacro" will appear in the list. Select "GameMacro" to connect and pair.
App Usage: After entering the app, click the "plus icon" in the upper left corner to select the connected handle. Connection is successful. GameMacro offers various functions and applications as guided by the app interface.
Firmware Updates: You can update the joystick's firmware via the GameMacro app. You can also revert to older firmware versions.
Note: Your cell phone must be connected to the joystick's wireless device to retrieve the wireless name of "GameMacro" in the app.
Security Instructions
- Please read this manual carefully before use to familiarize yourself with operation and adjustment.
- The product must not be disassembled privately.
- It is strictly prohibited to expose the product to fire or water to avoid explosion.
- The charging source should be a 5V/2A charging cable; non-standard charging equipment is not applicable.
