Lutron Connect Portal
Lutron | Intelligent light. Automated Shades. Powerful ControlsLutron Support Center | Lutron
Owner's Manual for LUTRON models including: 040-490, 040490, myRoom XC Guest Room Management System, myRoom XC, Guest Room Management System, Room Management System, Management System, System
This manual includes the following information: • Service contact list. • Maintenance requirements. • Warranty information. • Software operation. • Safety ...
This manual includes the following information: • Service contact list. • Maintenance requirements. • Warranty information. • Software operation. • Safety ...
8 hours ago — This manual includes the following information: • Service contact list. • Maintenance requirements. • Warranty information. • Software operation. • Safety ...
File Info : application/pdf, 3 Pages, 58.45KB
DocumentDocumentLutron myRoom XC Operation and Maintenance Manual Introduction This manual includes the following information: · Service contact list · Maintenance requirements · Warranty information · Software operation · Safety precautions Specific descriptions of how the various system components were integrated into your specific location and how the overall system operates to control your building needs can be obtained by contacting Customer Assistance at +1.610.282.3800. Thank you again for your purchase, and we hope that you enjoy your new Lutron system. Service Contact List If you need to schedule a technician to help you/your team remotely or onsite in North America, please go to www.lutron.com/en-US/Service-Support/Pages/Service/OnSiteService/ScheduleVisit.aspx to request a visit. For international support, see contact information below. For factory service or to order replacement parts, contact your Lutron office or use the contact information listed below: World Headquarters Lutron Electronics Co., Inc. 7200 Suter Road Coopersburg, PA 18036-1299 U.S.A. Toll-free: 1.844.LUTRON1 TEL: +1.610.282.3800 FAX: +1.610.282.1243 support@lutron.com 1 Lutron myRoom XC Operation and Maintenance Manual Maintenance Requirements Lutron products are designed to have minimal maintenance requirements as detailed below: Wall Controls Follow the cleaning recommendations at www.lutron.com/en-US/pages/productcleaningrecommendations.aspx Sensors No maintenance required. Panels Visually inspect installation periodically. Keep airflow clear of obstructions. Battery-Powered Devices (Battery Replacement) Replace batteries as needed with the correct type of battery. See the individual product installation sheet for battery specifications. Warranty Information Please see the instruction sheet enclosed with the product, or visit: https://assets.lutron.com/a/documents/3601201a_commercial_limited_warranty.pdf Software Operation The Lutron Dashboard is a browser-based facility operations and improvement tool that empowers facility and space managers to maximize their efficiency. The Lutron Dashboard can be accessed at connect.lutron.io Safety Precautions Safety information and / or precautions are included with each product and can also be found at www.lutron.com. Please refer to these manuals for safety related information and instructions associated with each of the system's components / devices. Under no circumstances should Lutron supplied safety information and instructions supersede, or be considered a substitute for, your local organization's electrical safety procedures. General Safety Precautions: · Only personnel with the proper electrical safety training qualifications should be permitted to perform maintenance on Lutron control equipment. · Only personnel with sufficient training on, and knowledge of, Lutron controls equipment should be permitted to perform maintenance on this equipment. · Always de-energize, lockout, tagout, and verify de-energized, all electrical equipment prior to performing work on that equipment. Perform these activities only in accordance with your local site's safety procedures. · Multiple circuits may feed some Lutron equipment. Locate and lock each supply breaker in the OFF position before performing maintenance work. Prior to performing maintenance on de-energized Lutron equipment, always test for the presence of voltage before beginning the maintenance work, even if you are certain that you have completely de-energized the equipment. · If something unexpected occurs while performing maintenance work on Lutron equipment, stop work immediately, secure the work site, and seek help. · Use only Lutron-approved replacement parts for easy mounting, installation, and relocation. 2 Customer Assistance If you have questions concerning the installation or operation of this system, call Lutron Customer Assistance. Visit us on the web at www.lutron.com/support WORLD HEADQUARTERS: TEL: +1.610.282.3800 Customer Assistance: 1.844.LUTRON1 UK AND EUROPE: TEL: +44.(0)20.7702.0657 Customer Assistance: +44.(0)20.7680.4481 MEXICO: Customer Assistance: +1.888.235.2910 ASIA: TEL: +65.6220.4666 Customer Assistance: 800.120.4491 The Lutron logo, Lutron, and myRoom are trademarks or registered trademarks of Lutron Electronics Co., Inc. in the US and/or other countries. All other product names, logos, and brands are property of their respective owners. © 2025 Lutron Electronics Co., Inc. P/N 040490 Rev. A 03/2025 Customer Assistance Hotlines: France: 0800.90.12.18 Germany: 00800.5887.6635 Italy: 800.979.208 Spain: 900.948.944 Northern China: 10.800.712.1536 Southern China: 10.800.120.1536 Hong Kong: 800.901.849 Singapore: 800.120.4491 Taiwan: 00.801.137.737 Thailand: 001.800.120.665853 Other Countries in Asia: +65.6220.4666 Lutron Electronics Co., Inc. 7200 Suter Road Coopersburg, PA 18036 USA