Instruction Manual for milwaukee models including: M12 FMT, Cordless Multifunction Tool
Milwaukee M12FMT-0 FUEL 12V Li-Ion RedLithium Brushless Cordless Multi-Tool - Bare | Bare Units | Screwfix.com
M12 FMT Original instructions 16 6 START STOP Text section with Technical Data, important Safety and 18 Working Hints and description of Symbols 8 10 12 13 2 4 15 14 7 3 1 Remove the battery pack before starting any work on the machine. 2 1 2 4 click 2 2-3 sec 1 100% 75% 50% 25% 5 START Insulated gripping surface Allow the tool to come to full speed before beginning the work. STOP 6 1.........................12 7 1 3 3 2 1 4 2 12 5 8 9 1 3 3 2 1 2 4 12 10 11 12 13 1 2 3 14 1 2 3 15 16 17 TECHNICAL DATA MULTITOOL M12 FMT Production code ........................................................................ .........................4834 50 01... ...000001-999999 Battery voltage .......................................................................... .............................. 12 V Weight according EPTA-Procedure 01/2014 (2.0 Ah).............. ........................... 1,25 kg Weight according EPTA-Procedure 01/2014 (4.0 Ah).............. ........................... 1,47 kg Oscillating angle left/right ........................................................ .........................1,95°/ 1,95° Deltasander no load oscillation frequency................................ ............. 10000-20000 min-1 Recommended ambient operating temperature....................... ...................... -18°C ... +50 °C Recommended battery types.................................................... ............................. M12B... Recommended charger ............................................................ M12-18 C; M12-18 FC; M12-18 AC; M12 C4; C12 C Noise/Vibration Information Measured values determined according to EN 62841 Typically the A-weighted sound pressure level of the tool is: Sound pressure level (Uncertainty K=3dB(A)) ......................... ......................... 77,78 dB (A) Sound power level (Uncertainty K=3dB(A)).............................. ......................... 88,78 dB (A) Wear ear protectors! Total vibration values (vector sum in the three axes) determined according to EN 62841. ViSbraantidoinnge.m...i.s..s.i.o..n...v..a..l.u..e...a..h..*.1..................................................... ........................... 4,56 m/s2 Uncertainty K = ...................................................................... ........................... 1,50 m/s2 Cutting wood .......................................................................... ......................... 10,01 m/s2 Uncertainty K = ...................................................................... ........................... 1,50 m/s2 *1 with saw blade bimetal, dimension 81 x 34 x 1,25 mm WARNING The vibration and noise emission level given in this information sheet has been measured in accordance with a standardized test given in EN 62841 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. The declared vibration and noise emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration and noise emission may differ. This may significantly increase the exposure level over the total working period. An estimation of the level of exposure to vibration and noise should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration and/or noise such as: maintain the tool and the accessories, keep the hands warm, organization of work patterns. WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. MULTITOOL SAFETY WARNINGS Hold the power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring. Cutting accessory contacting a ,,live" wire may make exposed metal parts of the power tool ,,live" and could give the operator an electric shock. Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by your hand or against the body leaves it unstable and may lead to loss of control ADDITIONAL SAFETY AND WORKING INSTRUCTIONS Use protective equipment. Always wear safety glasses when working with the machine. The use of protective clothing is recommended, such as dust mask, protective gloves, sturdy non-slip footwear, helmet and ear defenders. The dust produced when using this tool may be harmful to health. Do not inhale the dust. Wear a suitable dust protection mask. Do not machine any materials that present a danger to health (e.g. asbestos). 18 ENGLISH Switch the device off immediately if the insertion tool stalls! Do not switch the device on again while the insertion tool is stalled, as doing so could trigger a sudden recoil with a high reactive force. Determine why the insertion tool stalled and rectify this, paying heed to the safety instructions. The possible causes may be: · it is tilted in the workpiece to be machined · it has pierced through the material to be machined · the power tool is overloaded Do not reach into the machine while it is running. The insertion tool may become hot during use. WARNING! Danger of burns · when changing tools · when setting the device down Chips and splinters must not be removed while the machine is running. When working in walls ceiling, or floor, take care to avoid electric cables and gas or waterpipes. Clamp your workpiece with a clamping device. Unclamped workpieces can cause severe injury and damage. Do not use cracked or distorted saw blades. Plunge cuts without pre-drilling a hole are possible with soft materials (wood, light building materials for walls). Harder materials (metals) must first be drilled with a hole corresponding to the size of the saw blade. Remove the battery pack before starting any work on the machine. Do not dispose of used battery packs in the household refuse or by burning them. Milwaukee Distributors offer to retrieve old batteries to protect our environment. Do not store the battery pack together with metal objects (short circuit risk). No metal parts must be allowed to enter the battery section of the charger (short circuit risk). Use only System M12 chargers for charging System M12 battery packs. Do not use battery packs from other systems. Never break open battery packs and chargers and store only in dry rooms. Keep dry at all times. Battery acid may leak from damaged batteries under extreme load or extreme temperatures. In case of contact with battery acid wash it off immediately with soap and water. In case of eye contact rinse thoroughly for at least 10 minutes and immediately seek medical attention. Warning! To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack or charger in fluid or allow a fluid to flow inside them. Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleach containing products, etc., can cause a short circuit. SPECIFIED CONDITIONS OF USE The Maschine can be combined with different tools and is designed for following use: Sander Head: sanding wood, metal and plastics Segment saw blade head: for cutting flush to a surface in wood and plastics. Universal blade head: for working in wood. Do not use this product in any other way as stated for normal use. EC-DECLARATION OF CONFORMITY We declare under our sole responsibility that the product described under "Technical Data" fulfills all the relevant regulations and the directives 2011/65/EU (RoHS), 2014/30/ EU, 2006/42/EC, and the following harmonized standards have been used: EN 62841-1:2015 EN 62841-2-11:2016+A1:2020 EN 62841-2-4:2014 EN 55014-1:2017+A11:2020 EN 55014-2:2015 EN IEC 63000:2018 Winnenden, 2021-01-15 Alexander Krug Managing Director Authorized to compile the technical file. Techtronic Industries GmbH Max-Eyth-Straße 10 71364 Winnenden Germany GB-DECLARATION OF CONFORMITY We declare as the manufacturer under our sole responsibility that the product described under "Technical Data" fulfills all the relevant provisions of the following Regulations S.I. 2008/1597 (as amended), S.I. 2016/1091 (as amended), S.I. 2012/3032 (as amended) and that the following designated standards have been used: BS EN 62841-1:2015 BS EN 62841-2-11:2016+A1:2020 BS EN 62841-2-4:2014 BS EN 55014-1:2017+A11:2020 BS EN 55014-2:2015 BS EN IEC 63000:2018 Winnenden, 2021-01-15 Alexander Krug Managing Director Authorized to compile the technical file. Techtronic Industries GmbH Max-Eyth-Straße 10 71364 Winnenden Germany BATTERIES Battery packs which have not been used for some time should be recharged before use. Temperatures in excess of 50°C (122°F) reduce the performance of the battery pack. Avoid extended exposure to heat or sunshine (risk of overheating). The contacts of chargers and battery packs must be kept clean. For an optimum life-time, after use, the battery packs have to be fully charged. To obtain the longest possible battery life remove the battery pack from the charger once it is fully charged. For battery pack storage longer than 30 days: Store the battery pack where the temperature is below 27°C and away from moisture Store the battery packs in a 30% - 50% charged condition Every six months of storage, charge the pack as normal. BATTERY PACK PROTECTION The battery pack has overload protection that protects it from being overloaded and helps to ensure long life. Under extreme stress the battery electronics switch off the machine automatically. To restart, switch the machine off and then on again. If the machine does not start up again, the battery pack may have discharged completely. In this case it must be recharged in the battery charger. TRANSPORTING LITHIUM BATTERIES Lithium-ion batteries are subject to the Dangerous Goods Legislation requirements. Transportation of those batteries has to be done in accordance with local, national and international provisions and regulations. · The user can transport the batteries by road without further requirements. · Commercial transport of Lithium-Ion batteries by third parties is subject to Dangerous Goods regulations. Transport preparation and transport are exclusively to be carried out by appropriately trained persons and the process has to be accompanied by corresponding experts. When transporting batteries: · Ensure that battery contact terminals are protected and insulated to prevent short circuit. · Ensure that battery pack is secured against movement within packaging. · Do not transport batteries that are cracked or leak. Check with forwarding company for further advice ENGLISH 19 MAINTENANCE Use only Milwaukee accessories and spare parts. Should components need to be replaced which have not been described, please contact one of our Milwaukee service agents (see our list of guarantee/service addresses). If needed, an exploded view of the tool can be ordered. Please state the machine type printed as well as the six-digit No. on the label and order the drawing at your local service agents or directly at: Techtronic Industries GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany. SYMBOLS CAUTION! WARNING! DANGER! Remove the battery pack before starting any work on the machine. Please read the instructions carefully before starting the machine. Wear gloves! Always wear goggles when using the machine. Do not dispose electric tools, batteries/ rechargeable batteries together with household waste material. Electric tools and batteries that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. Check with your local authority or retailer for recycling advice and collection point. n0 Stroke rate under no-load V Volts Direct current European Conformity Mark British Confomity Mark Ukraine Conformity Mark EurAsian Conformity Mark 20 ENGLISH 21 22 23 Copyright 2021 Techtronic Industries GmbH Max-Eyth-Str. 10 71364 Winnenden Germany +49 (0) 7195-12-0 www.milwaukeetool.eu Techtronic Industries (UK) Ltd Fieldhouse Lane Marlow Bucks SL7 1HZ UK (01.21) 4100 4705 50Acrobat Distiller 20.0 (Windows)