Joyroom JR-W12 Foldable Wireless Watch Charger

Product Information

Model: JR-W12

Name: Foldable Wireless Watch Charger

Material: ABS+PC fireproof material

Input Power: 5V 1A

Output Power: 3W

Size: 90*90*21mm

Net Weight: 50g

Packing List: Wireless Charger *1, Charging Cable *1, User Manual *1

Product Introduction

The Joyroom JR-W12 is a wireless charger specifically designed for Apple Watches. Its charging panel supports 0-90° adjustment and can be used in upright or flat charging modes. The foldable design makes it highly portable, ideal for home, office, or travel use. It features high flame-retardant material and a smart protection system, including over-current, over-voltage, and over-temperature protection, ensuring a safe charging experience.

Operation Steps

1. Lift the charging panel from the bottom and adjust it to the desired angle.
2. Connect the power source to begin charging your watch.
3. Note: The product's magnetic connection function allows for precise alignment with your Apple Watch.

Function Description

• Working Status: The product begins charging your watch immediately upon connection to power.
• Indicator Status 1: The indicator light illuminates when the product is connected to power and automatically turns off if no operation occurs within 10 seconds.
• Indicator Status 2: When a watch is placed on the charger, the charging indicator remains lit for 30 seconds before automatically turning off.

Safety Warning

• Do not expose the product to fire or water to prevent short circuits, leakage, or damage.
• Please inspect the product, data cable, and accessories before use. Discontinue use immediately if any damage is detected.
• Avoid using this product in high-temperature, humid, or corrosive environments to prevent circuit damage and charging issues.
• Do not allow the product to come into contact with corrosive liquids, as this can cause serious damage and compromise product safety.
• Do not disassemble or modify the product for any reason to avoid secondary failures and burning, which are not covered by the warranty.

Warning: Failure to follow the above safety instructions may result in fire, electric shock, damage, or other injuries.

Compliance Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

It is hereby declared that this product model of JOYROOM complies with the provisions of Directive 2014/53/EU and Directive 2011/65/EU. The full text of the EC Declaration of Conformity can be found on the following website: https://www.joyroom.com

This equipment complies with the provisions of Directive 2012/19/EU. It is strictly forbidden to dispose of this equipment with ordinary trash. It must be recycled. This symbol [recycle symbol] indicates that the product shall not be treated as regular domestic trash, and must be delivered to a recycling center that is capable of recycling electronic and electrical equipment.

[FCC logo] [RoHS logo] [CE logo]

Instrukcja obsługi (Polish)

Parametry produktu

Schemat produktu

[Image of the Joyroom JR-W12 Foldable Wireless Watch Charger showing magnetic watch charging panel, adjustable shaft, and Type-C input port]

Zawartość Opakowania

Ładowarka do zegarka *1, kabel ładujący *1, Instrukcja obsługi *1

Wprowadzenie produktów

Produkt jest bezprzewodową ładowarką zaprojektowaną specjalnie do zegarków iP. Panel ładowania obsługuje regulację w zakresie 0-90°, a także tryby ładowania w pozycji pionowej i płaskiej. Składana konstrukcja ułatwia przenoszenie. Idealnie nadaje się do użytku w domu, w biurze lub w podróży. Materiał o wysokiej ognioodporności i inteligentny system ochrony (w tym ochrona przed przetężeniem, ochrona przed przepięciem, ochrona przed przegrzaniem itp.) gwarantują bezpieczne ładowanie.

Kroki operacji

1. Podnieś panel ładowania od dołu i ustaw go pod żądanym kątem.
2. Podłącz zasilanie, aby rozpocząć ładowanie zegarka.
3. Uwaga: produkt dzięki funkcji połączenia magnetycznego można dokładnie dopasować do zegarka iP.

Opis funkcji

• Stan pracy: Produkt rozpocznie ładowanie zegarka zaraz po podłączeniu go do zasilania.
• Stan wskaźnika 1: Wskaźnik zaświeci się po podłączeniu produktu do zasilania i wyłączy się automatycznie, jeśli w ciągu 10 sekund nie zostanie wykonana żadna operacja.
• Stan wskaźnika 2: Umieść zegarek, wskaźnik ładowania będzie świecił przez 30 s, a następnie automatycznie się wyłączy.

Sicherheitswarnung (German)

• Setzen Sie dieses Produkt nicht in Feuer oder Wasser, um Kurzschlüsse zu vermeiden. Es kann zu Undichtigkeiten oder Schäden am Produkt kommen.
• Bitte überprüfen Sie das Produkt, das Datenkabel und anderes Zubehör vor Gebrauch. Hören Sie sofort auf, das Produkt zu verwenden, wenn Sie jegliche Beschädigung bemerken.
• Verwenden Sie dieses Produkt nicht bei hohen Temperaturen, Feuchtigkeit oder korrosiver Umgebung, um den Stromkreis nicht zu beschädigen und Lade- oder andere Probleme zu verhindern.
• Berühren Sie das Produkt nicht mit ätzenden Flüssigkeiten, da es sonst zu ernsthaften Schäden führen kann und die Produktsicherheit nicht garantiert werden kann.
• Zerlegen oder modifizieren Sie dieses Produkt aus keinem Grund, um Sekundärausfälle und Verbrennungen zu vermeiden, die nicht von der Garantie abgedeckt sind.

Warnung: Bitte befolgen Sie die oben genannten Sicherheitshinweise, da es sonst zu Bränden, Stromschlägen, Beschädigungen oder anderen Verletzungen kommen kann.