Ecler PLAYER ONE

1. IMPORTANT REMARK

The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING (If applicable): The terminals marked with a symbol of "⚡" may be of sufficient magnitude to constitute a risk of electric shock. The external wiring connected to the terminals requires installation by an instructed person or the use of ready-made leads or cords.

WARNING: To prevent fire or shock hazard, do not expose this equipment to rain or moisture.

WARNING: An apparatus with Class I construction shall be connected to a mains socket-outlet with a protective earthing connection.

2. IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug the apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
14. Disconnecting from mains: Switching off the POWER switch stops all functions and light indicators, but fully disconnecting the device from mains is done by unplugging the power cord from the mains input socket. For this reason, it must always remain readily operable.
15. Equipment is connected to a socket-outlet with earthing connection by means of a power cord.
16. The marking information is located at the bottom of the apparatus.
17. The apparatus shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the apparatus.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

WARNING: This product must not be discarded, under any circumstance, as unsorted urban waste. Take it to the nearest electrical and electronic waste treatment centre.

NEEC AUDIO BARCELONA, S.L. accepts no liability for any damage that may be caused to people, animals, or objects due to failure to comply with the warnings above.

3. IMPORTANT NOTE

Thank you for choosing the Ecler PLAYER ONE multimedia player!

It is VERY IMPORTANT to carefully read this manual and fully understand its contents before any connection to maximize your use and get the best performance from this equipment.

To ensure optimal operation of this device, we strongly recommend that its maintenance be carried out by authorized Technical Services. Ecler PLAYER ONE comes with a 3-year warranty.

4. INTRODUCTION

PLAYER ONE is a compact stereo audio player capable of playing music content from local storage devices (USB/MICRO SD), Internet streaming services (online radios, etc.), and digital media exchange (DLNA, AirPlay). Its main features include:

• 1 unbalanced stereo audio output, RCA connector and mini-jack (with stereo/mono selection).
• Compatibility with mp3, ogg, WAV, AIFF, and FLAC audio formats.
• One USB port and one MICRO SD card slot for access to local media content.
• Ethernet interface with RJ45 connector for communication with the web setup application and Internet streaming reception.
• Wi-Fi interface (client or master mode) for communication with the web application configuration and Internet streaming reception.
• Fully configurable through a web application (point-to-point or through the same LAN).
• 2 GPI (General Purpose Inputs) ports, to trigger 2 available events.
• Silence detection event.
• Internal clock with up to 240h autonomy (without AC adapter) and automatic synchronization with NTP services.
• Front panel controls and indicators: LCD display, digital encoder for menu navigation and parameter setting, and 6 backlit keys with pre-assigned functions (ENTER, ESC, STOP, PLAY/PAUSE, NEXT, PREV).
• Modular firmware: PLAYER ONE has firmware with modular services allowing users to personalize its operation and adapt it to their project or business model. The firmware includes functions like calendar event triggering, cloud content synchronization (Cloud Disk Sync) compatible with Google Drive, script execution (using Lua language), local file encryption, and an activity log.

Note: PLAYER ONE programming is done through the embedded web application. Refer to the PLAYER ONE & PLAYER ZERO web GUI application manual for more information.

5. INSTALLATION AND CONNECTIONS

5.1. Location, set up and ventilation

The PLAYER ONE is designed for desktop use or as a 19" rackmount unit, occupying half a rack space (with optional 1UHRMKIT). For professional installations, it should preferably be placed in the same rack as the audio sources. Due to its low power consumption, forced ventilation is not necessary. However, avoid exposing the device to extreme temperatures, and ensure the environment is dry and clean (dust-free).

5.2. AC connection and powering on

The PLAYER ONE is powered by alternating current (AC) via its external power supply (100-240 VAC, 50-60 Hz) with interchangeable connectors (American, European, British, Chinese). The operating environment should be dry and dust-free. Do not expose the unit to dripping or splashing, and do not place objects like candles on top. Always power off the unit before any intervention or connection/disconnection. There are no user-serviceable parts inside. To avoid buzzing, do not allow the power cable to intertwine with audio shielded cables.

5.3. Audio output connections

The PLAYER ONE has 1 unbalanced stereo output on its rear panel. The signal output connectors are 2 x RCA and 1 x stereo mini-jack.

5.4. Ethernet port for configuration and Internet connection

An RJ45 connector allows connection to an Ethernet network or directly to a computer. This provides access to Internet content and unit configuration via a web browser pointing to the PLAYER ONE's IP address. Refer to the PLAYER ONE & PLAYER ZERO web GUI application manual for details.

5.5. Wi-Fi interface for configuration and Internet connection

A Wi-Fi interface allows connection to a Wi-Fi network or directly to a computer via Wi-Fi. This provides access to Internet content and unit configuration via a web browser pointing to the PLAYER ONE's IP address. Refer to the PLAYER ONE & PLAYER ZERO web GUI application manual for details.

5.6. GPI remote control ports

The PLAYER ONE has 2 GPI control inputs on its rear panel. These inputs can be connected to an external physical device (e.g., a contact closure) and associated with PLAYER ONE functions such as:

• Load and play previously configured audio content
• Preset recall
• Audio playback with priority over the music program
• Transport bar control (PLAY/PAUSE, STOP, etc.)
• Internal triggering for interaction with other player services (e.g., scripts).

GPI connectors use 3-position screw terminal blocks (Euroblocks). Wiring is as follows:

• GPI terminal connects to terminals 1 and 2.
• Ground connects to terminal [ground symbol].

Figure 1: Connection example of GPI 2. Connecting cables can be up to 500 meters long with a minimum section of 0.5 mm².

6. FRONT PANEL

The PLAYER ONE front panel features:

• MICRO SD/MICRO SDHC slot: For local audio content playback (up to 2TB, FAT16/32 format).
• USB 2.0 port: For local audio content playback (up to 2TB, FAT16/32 and NTFS format).
• SP LED: Signal presence indicator.
• NET LED: Network (Internet) data reception indicator.
• LCD display: Displays menus, player information, etc.
• CONTROL & SELECT digital encoder: Allows menu navigation, parameter selection, etc.
• ESC key: Exits the menu (returns to the main screen) and provides access to the lock menu.
• ENTER key: Accesses the main menu and device configuration.
• PREV (◀) key: Skips to the previous song in the playlist. Navigates through menu settings.
• STOP key (■): Stops the current playback.
• PLAY/PAUSE (▶ ||) key: Starts/pauses playback.
• NEXT (▶) key: Skips to the next song in the playlist. Navigates through menu settings.

[Image description: A front view of the Ecler PLAYER ONE device showing the LCD display, various buttons, and a digital encoder.]

7. STARTUP

The PLAYER ONE can be used as a local media player without prior configuration. However, Ecler recommends configuring it via the web application for full functionality. Refer to the PLAYER ONE & PLAYER ZERO web GUI application manual.

Plug the power cord into the back of the device to turn it on. A startup message will appear on the screen.

Note: Ensure your device's firmware is updated to the latest version for all described features. Visit www.ecler.com for downloads.

7.1. Power up

Two functionalities can be executed when turning on the device:

• Restore Factory Defaults: Turn on the device while holding down the STOP key. Follow the instructions on the PLAYER ONE LCD screen. Note: This action erases all device settings and parameter values. Save a backup copy before proceeding.
• Restore firmware: Turn on the device while holding down the PLAY button to install the latest firmware from the Ecler website or a local storage system (USB/MICRO SD). Follow LCD instructions.

Notes for firmware restore:

• To restore the latest firmware, connect the device to a DHCP server with Internet access to download it.
• If not performed correctly, device settings and parameters may be lost. Save a backup copy beforehand.

These operations can also be performed via the FD/FS button on the rear panel:

• Factory Default: With the unit powered on, press and hold the FD/FS button for 10 seconds using a pin or paper clip.
• Fail Safe (Restore firmware): With the unit unplugged, press and hold the FD/FS button using a pin or paper clip, then plug in the unit. The front LEDs will flash rapidly for 3 seconds, after which the FD/FS button can be released.

[Image description: Diagram showing the rear panel of the PLAYER ONE with connections labeled, and a hand pointing to the FD/FS button.]

7.2. Main menu

The main menu allows playback adjustments like selecting audio source and loading presets. Access it by pressing the ENTER key. Navigate using the NEXT (▶) and PREV (◀) keys. Rotate the CONTROL & SELECT encoder to select parameters. The selected parameter flashes until confirmed by pressing the encoder. Changes are not applied if you navigate away or exit without confirming, except for volume which is real-time. Press ESC to exit the main menu.

The main menu items are:

• SOURCE: Selects the audio source (USB, MICRO SD/MICRO SDHC, DLNA, AirPlay, or preset sources). Refer to the PLAYER ONE & PLAYER ZERO web GUI application manual for creating audio sources. If a device is not found or readable, "UNAVAILABLE" is displayed.
• PRESET: Recalls user presets (up to 20). Refer to the PLAYER ONE & PLAYER ZERO web GUI application manual for preset configuration.
• VOLUME: Controls player volume in real-time. 0dB is maximum. Press CONTROL & SELECT encoder to mute/unmute output.
• REPEAT: Sets track repeat modes: PLAY ALL (once), PLAY ONE (once), REPEAT ALL (playlist repeats), REPEAT ONE (track repeats).
• PLAY MODE: Sets playback mode: SEQUENTIAL (alphanumeric order) or RANDOM.
• FADE: Sets transition mode between tracks: OFF (no fade), XFADE (crossfade), or FADE (ending track fades out, next track fades in).
• BOOT MODE: Adjusts startup parameters: KEEP STATUS (retains last settings) or LOAD PRESET1 (loads preset 1).

7.3. Local media playback

7.3.1. Playing files stored on USB storage devices

Insert USB media with audio files into the USB port. Press ENTER to access the main menu. In the SOURCE submenu, select USB using the CONTROL & SELECT encoder and confirm. Press ▶ to start playback. If no media is found or readable, "USB UNAVAILABLE" is displayed. If no accepted audio formats are found, "NOT FOUND" is displayed. Ensure media is properly inserted and files meet specifications.

[Image description: Device display showing "Artist-song.mp3" with playback controls and "USB" indicator.]

The CONTROL & SELECT encoder can display additional information: track name, audio format, bitrate, duration, and sample rate. A second press displays playlist information (current track position and total tracks).

[Image description: Device display showing "Artist-song.mp3" with track details like bitrate and sample rate.]

[Image description: Device display showing playlist index and total count.]

7.3.2. Playing files stored on MICRO SD memory cards

Insert a MICRO SD/MICRO SDHC card with audio files into the slot. Press ENTER to access the main menu. In the SOURCE submenu, select MMC using the CONTROL & SELECT encoder and confirm. Press ▶ to start playback. If no media is found or readable, "MMC UNAVAILABLE" is displayed. Ensure media is properly inserted and files meet specifications.

[Image description: Device display showing "Artist-song.mp3" with playback controls and "MMC" indicator.]

7.4. Audio streaming playback

The PLAYER ONE supports audio streaming via Ethernet or Wi-Fi, including DLNA and AirPlay, allowing playback from smartphones, tablets, or PCs. It also supports Internet streaming services like online radios or files from a server, requiring a stable Internet connection.

7.4.1. Audio streaming playback via AirPlay

Audio content can be sent via AirPlay by connecting your device to the PLAYER ONE Wi-Fi interface or via a home Wi-Fi network. AirPlay also works with a wired Ethernet connection. Refer to the PLAYER ONE & PLAYER ZERO web GUI application manual for LAN connection details.

Ensure your device and PLAYER ONE are on the same local network or point-to-point connected. Press ENTER to access the main menu, select AIRPLAY in the SOURCE submenu using the encoder, and confirm. The "AIRPLAY MODE" message flashes, indicating readiness.

[Image description: Screenshot of an iOS device showing AirPlay selection, with "PLAYER ONE" listed as a playback device.]

7.4.2. Audio streaming playback via DLNA

Audio content can be sent via DLNA by connecting your device to the PLAYER ONE Wi-Fi interface or via a home Wi-Fi network. DLNA is not available via wired Ethernet. Refer to the PLAYER ONE & PLAYER ZERO web GUI application manual for LAN connection details.

Ensure your device and PLAYER ONE are on the same local network. Press ENTER to access the main menu, select DLNA in the SOURCE submenu using the encoder, and confirm. The "DLNA MODE" message flashes, indicating readiness.

[Image description: Screenshot of an Android device showing playback selection, with "ECLER PLAYER ONE" listed as a playback device.]

7.4.3. Listening to an Internet radio station

Connect PLAYER ONE to the Internet via Ethernet or Wi-Fi. Refer to the PLAYER ONE & PLAYER ZERO web GUI application manual for Internet connection details.

PLAYER ONE includes an Internet radio service with access to over 120,000 radio stations worldwide (music, news, sports, podcasts). Press ENTER to access the main menu, select INTERNET RADIO in the SOURCE submenu using the encoder, and confirm. Note: INTERNET RADIO is at the top of the list; turn the encoder counter-clockwise.

Navigate menus using the encoder and press to select. Press ESC to return to the previous menu.

[Image description: Device display showing "Local Radio" and "Music" navigation options.]

To save a preset radio station, press and hold the rotary encoder for 2 seconds on the desired station. Turn the encoder to select a preset number and press to store.

[Image description: Device display showing "SAVE RADIO TO >> 01 - PRESET 01".]

If a preset is empty, confirm to store. To not store, return to the previous menu and select another preset. To overwrite, confirm. Stored Internet radios are available in the SOURCE submenu.

7.4.4. Audio streaming playback over the Internet

Connect PLAYER ONE to the Internet via Ethernet or Wi-Fi. Refer to the PLAYER ONE & PLAYER ZERO web GUI application manual for Internet connection details.

Press ENTER to access the main menu. In the SOURCE submenu, select your playlist (preset Internet radio or created playlist) using the CONTROL & SELECT encoder and confirm. Press ▶ to start playback. If playback does not start, check your Internet connection and network settings.

[Image description: Device display showing "radio-online.mp3" with playback time and "NET" indicator.]

7.5. Configuration Menu

The configuration menu allows setting network parameters, date/time, audio output mode (mono/stereo), and viewing device information. Access it by holding ENTER for a few seconds. Navigation and parameter setting are similar to the main menu.

Menu items include:

• CHANNELS: Set output to stereo or mono.
• WIFI: Configure Wi-Fi interface. Options: OFF (disable), ON (enable, press encoder to display IP address; in MASTER mode, IP is 192.168.189.1 - refer to manual for details), RESTORE DEFAULTS (reset Wi-Fi parameters).
• ETHERNET: Set Ethernet interface to DHCP or STATIC addressing. Turn encoder to select option. DHCP: press encoder to display IP. STATIC: edit parameters (IP, MASK, GATEWAY, DNS1, DNS2) by pressing encoder and NEXT key. APPLY+REBOOT option restarts the device with new settings.
• DATE: Displays date in YEAR/MONTH/DAY format.
• TIME: Displays time in HH:MM format.
• GALLERY: Under construction.
• VERSION: Displays current firmware version.

7.6. Lock Menu

To access the lock menu, press and hold ESC for approximately 10 seconds. Options include:

• UNLOCK ALL: Unlocks all front panel keys.
• UNLOCK USER: Locks access to device configuration menu (administrator functions) but allows use of other features. A submenu requires entering a password. Turn encoder to select digits, press NEXT to advance, and press encoder to confirm. The menu will relock after user inactivity.
• LOCK ALL: Locks all front panel keys. To unlock, follow the same procedure as for unlocking the configuration menu (UNLOCK ALL).

8. PLAYER ONE FUNCTION LIST

1. LCD display
2. CONTROL & SELECT digital encoder
3. ON LED power indicator
4. SP LED signal present indicator
5. NET LED network traffic indicator
6. SD LED Micro SD source operation indicator
7. ESC key
8. ENTER key
9. STOP key
10. PLAY/PAUSE key
11. PREV key
12. NEXT key
13. MICRO SD slot
14. USB port
15. WiFi Antenna
16. Security flange for power supply cable
17. External power supply connector
18. 2 x RCA stereo output
19. Stereo mini-jack output
20. RJ-45 connector
21. Factory Default / Fail Safe button
22. GPI Port
23. Indicator Light, WIFI

9. PLAYER ONE FUNCTION DIAGRAM

[Image description: A diagram illustrating the front and rear panels of the Ecler PLAYER ONE, with numbered components corresponding to the function list. Front panel components include LCD display, encoder, buttons (ON, SP, NET, SD, CONTROL, ESC, SELECT, ENTER, STOP, PLAY/PAUSE, PREV, NEXT). Rear panel components include DC IN, AUDIO OUT (RCA, mini-jack), ETHERNET, FD/FS button, WIFI antenna, GPI port, and power supply connector.]

10. TECHNICAL SPECIFICATIONS

All product characteristics are subject to variation due to production tolerances. NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications.

For technical queries, contact your supplier, distributor, or complete the contact form on the website at Support / Technical requests.

Motors, 166-168 08038 Barcelona - Spain - (+34) 932238403 | information@ecler.com | www.ecler.com