Supermicro 6048R-E1CR36H Super Storage Server
Key Features
- Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4/v3 family; QPI up to 9.6GT/s
- Up to 2TB ECC 3DS LRDIMM, up to DDR4-2400MHz; 16x DIMM slots
- 1 PCI-E 3.0 x16, 6 PCI-E 3.0 x8 (slot 1 & 2 occupied by controller and JBOD expansion port)
- Dual 10GBase-T LAN w/Intel® X540
- HW SAS3 Controller Storage Expandable
- 36x 3.5" Hot-swap drive bays (24 front + 12 rear): 32x 3.5" Hot-swap SAS3/SATA3 drive bays and 4x NVMe hybrid drive bays (SAS3/SATA3/NVMe); 2x 2.5" optional Hot-swap SATA drive bays (rear); 4x 2.5" internal fixed drive bays
- SAS3 via LSI 3108 AOC (HW RAID)
- Server remote management: IPMI 2.0 / KVM over LAN / Media over LAN
- 7x 80mm middle cooling fans
- 1280W Redundant Power Supplies Platinum level (94%)
Note: Image above may show a varied configuration or optional parts. Please refer to parts list for standard parts included.
Specifications
Product SKUs
SSG-6048R-E1CR36H
Motherboard
Super X10DRH-iT
Processor/Cache
- CPU: Intel® Xeon® processor E5-2600 v4/v3 family (up to 145W TDP)
- Cores/Cache: Up to 22 Cores / Up to 55MB Cache
- System Bus: QPI up to 9.6 GT/s
- Note: BIOS version 2.0 or above is required. Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
System Memory
- Memory Capacity: 16x 288-pin DDR4 DIMM slots, Up to 2TB ECC 3DS LRDIMM, 512GB ECC RDIMM
- Memory Type: 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
- DIMM Sizes: RDIMM: 32GB, 16GB, 8GB, 4GB; LRDIMM: 64GB, 32GB; 3DS LRDIMM: 128GB
- Memory Voltage: 1.2V
- Error Detection: Single-bit errors
On-Board Devices
- Chipset: Intel® C612 chipset
- SAS: SAS3 (12Gbps) via LSI 3108 AOC; HW RAID 0,1,5,6,10,50,60
- SATA: SATA3 (6Gbps) with RAID 0, 1, 5, 10
- IPMI: Support for Intelligent Platform Management Interface v.2.0; IPMI 2.0 with virtual media over LAN and KVM-over-LAN support; ASPEED AST2400 BMC
- Network Controllers: Intel® X540 Dual Port 10GbE; Virtual Machine Device Queues reduce I/O overhead; Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output; Realtek RTL8201N PHY (dedicated IPMI)
- Graphics: ASPEED AST2400 BMC
Input/Output
- LAN: 2 RJ45 10GBASE-T LAN ports; 1 RJ45 Dedicated IPMI LAN port
- USB: 2 USB 3.0 ports (rear); 2 USB 2.0 ports (rear)
- VGA: 1 VGA port
- Serial Port/Header: 1 Fast UART 16550 port / 1 Header
Chassis
- Form Factor: 4U Rackmount
- Model: CSE-847BE1C-R1K28LPB
Dimensions and Weight
- Width: 17.2" (437mm)
- Height: 7" (178mm)
- Depth: 27.5" (699mm)
- Weight: Gross Weight: 102.5 lbs (46.4 kg); Net Weight: 65.5 lbs (29.7 kg)
- Available Colors: Black
Front Panel
- Buttons: Power On/Off button, System Reset button
- LEDs: Power status LED, Hard drive activity LED, 2 Network activity LEDs, System Overheat LED, Power fail LED
Expansion Slots
- PCI-Express: 1 PCI-E 3.0 x16 slot; 6 PCI-E 3.0 x8 slots (Slot 1 & 2 occupied by controller and JBOD Expansion Port)
Drive Bays
- Hot-swap: 36x 3.5" Hot-swap SAS3/SATA3 drive bays (Double-sided: 24 front + 12 rear); 2x 2.5" Hot-swap SATA drive bays (rear)
- Optional: Fixed internal Drive Bracket supports 1 x 3.5 or 2x 2.5" devices
- Backplane: SAS3/SATA3 single expander per backplane
System Cooling
- Fans: 7x 80mm middle cooling fans; Redundant cooling
Power Supply
1280W High-Efficiency (95%+) power supply with Digital Switching Control & PMBus 1.2
- AC Input: 1000W Output @ 100-140V, 12-8A, 50-60Hz; 1280W Output @ 180-240V, 8-6A, 50-60Hz
- DC Output: 1000W +12V/83A; +5Vsb/4A; 1280W +12V/106.7A, +5Vsb/4A
- Certification: Platinum Certified
System BIOS
- BIOS Type: 128Mb SPI Flash EEPROM with AMI BIOS
- BIOS Features: Plug and Play (PnP), APM 1.2, PCI2.2, ACPI 1.0/2.0, USB Keyboard support, SMBIOS2.3, UEFI
Operating Environment & Compliance
- Environmental Spec.: RoHS Compliant
- Operating Temperature: 10°C to 35°C (50°F to 95°F)
- Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5% to 95% (non-condensing)
Parts list
See Parts List
Note: * NVMe support requires additional parts in optional parts list