TECH Sinum WS-01 / WS-02 / WS-03 Light Switch
The WS-01 / WS-02 / WS-03 light switch is a device that allows you to control lighting directly from the switch or with the use of a Sinum central unit. The central unit enables users to program specific conditions for switching lights on and off. The switch communicates wirelessly with the Sinum central unit, and the entire system allows users to control their smart home using mobile devices.
The WS-01 / WS-02 / WS-03 switch features a built-in light sensor that adjusts the brightness of the button backlight to the ambient light level in the room. For the WS-03 model, the outermost buttons are used to control lighting, while the middle button functions as a programmable button. This programmable button can be used to activate automations previously programmed in the Sinum central device.
Note: Drawings are for illustrative purposes only. The number of buttons may vary depending on the device version. The maximum load for a single output for LED lighting is 200W.
Description of Components
- 1 - Registration button
- 2 - Light sensor
- 3 - Main buttons
- 4 - Function button
Diagram Description
The diagram illustrates the WS-01 / WS-02 / WS-03 light switch. It shows the switch unit with connection terminals labeled 'N' (Neutral) and 'L' (Live) for power input, and 'Q1' and 'Q2' for output connections to the lighting. The diagram also depicts the different buttons on the switch: a registration button (1), a light sensor (2), main buttons (3), and a function button (4). It shows two configurations: one for the WS-01 model and another for the WS-02 / WS-03 models, indicating how the output terminals might be used differently.
Registering the Device in the Sinum System
To register the device in the Sinum system:
- Enter the address of the Sinum central device in your web browser and log in.
- In the main panel, navigate to Settings > Devices > Wireless devices > +.
- Briefly press the registration button (1) on the device.
A confirmation message will appear on the screen upon successful registration. Users can also name the device and assign it to a specific room.
Technical Data
| Parameter | Value |
|---|---|
| Power supply | 230V ±10% / 50Hz |
| Max. power consumption | 1.2W (WS-01) 1.6W (WS-02, WS-03) |
| Operation temperature | 5 – 50°C |
| Maximum output load | 4A (AC1)* / 200W (LED) |
| Operation frequency | 868 MHz |
| Max. transmission power | 25 mW |
* AC1 load category: single-phase, resistive or slightly inductive AC load.
Notes
TECH Controllers is not responsible for any damages resulting from improper use of the system. The range of the device depends on the operating conditions and the construction materials of the building. The manufacturer reserves the right to improve devices, update software, and related documentation. Graphics are for illustration purposes only and may differ slightly from the actual appearance. Diagrams are examples. All changes are updated on the manufacturer's website. Read the following regulations carefully before using the device for the first time. Failure to follow these instructions may lead to personal injury or device damage. The device must be installed by a qualified person. It is not intended for operation by children. This is a live electrical device. Ensure the device is disconnected from the mains before performing any power-related activities (connecting cables, installation, etc.). The device is not water-resistant.
The product must not be disposed of in household waste containers. Users are obliged to transfer used equipment to a designated collection point for recycling of electrical and electronic waste.
EU Declaration of Conformity
Tech Sterowniki II Sp. z o.o., ul. Biala Droga 34, Wieprz (34-122) hereby declares under its sole responsibility that the light switch WS-01, WS-02, WS-03 complies with Directive 2014/53/EU.
Date: Wieprz, 01.12.2023
Signatories: Pawel Jura, Janusz Master (Company Presidents)
The full text of the EU declaration of conformity and the user manual are available after scanning the QR code or at www.tech-controllers.com/manuals.
