mailto:info@epdecking.com
Installation Guide for EP Decking models including: WPCF1001, LHMZL005A, LHMZL014, LHMZL031, LHMZL007, LHMZL006, LHMZL029, SBPHT4x20, BHNOF8x50, NHM8, WSD8, WPCF1001 Wood Plastic Composite, WPCF1001, Wood Plastic Composite, Plastic Composite, Composite
1 день назад — EP Decking fences are made from durable and weather-resistant Wood Plastic. Composite (WPC) materials. Designed for elegance and privacy, they resist mold,.
File Info : application/pdf, 7 Pages, 2.67MB
DocumentDocumentEP Decking Wood Plastic Composite (WPC) Dig-In Installation Fencing Guide EP Decking fences are made from durable and weather-resistant Wood Plastic Composite (WPC) materials. Designed for elegance and privacy, they resist mold, mildew, rot, and termites. No painting or staining is required, and the fences are easy to install on various surfaces using the proper base holder. Each fence panel consists of two WPCFB boards and one WPCF-A01 board, forming a 6' x 6' panel. Wood Plastic Composite (WPC) Resistant to Mold, Mildew, Rotting, & Termites 100% Waterproof, Non-Toxic, Anti-Slip, Anti-Scratch, Anti-Stain, & Fire Resistant! Easy to Install! Enhances your outdoor space No painting or staining is required EP Decking - WPC Fencing Page 1 WPCF1001- (P1B/P4/C03/C04)PHR5 Fence Parts Item Descriptions WPCFB 6 pieces WPCF Fence Boards. Board Size: 3/4" x 6" x 70 1/2" WPCFA01 Aluminum Alloy Gray End/Line/Corner Post Kit Each Aluminum Alloy Gray Post Kit Includes: LHMZL005A Quad Directional 74" Post (G) LHMZL014 Top Board Cover (K) LHMZL031 Bottom Board Rail (J) LHMZL007 Post Cap (I) Model # LHMZL006 LHMZL029 Post Side Cover (A) Corner Clip (E) SBPHT4x20 Screws BHNOF8x50 Bolts (C) NHM8 Nut (C) WSD8 Washer (C) Post Holder LHMZL004 Pronged Post Holder For Dig-In Installation ***Please read all instructions before installing your new fence. ***Below the Surface Dig-In Installation 1. Installing the Pronged Post Holder: Dig a hole at your desired starting point. (Minimum recommended dimensions: 9" x 9" x 24") Fill the hole with wet concrete. Quantity 10 6 1 1 1 1 3 2 4 2 2 2 6 EP Decking - WPC Fencing Page 2 Post Holder Concrete Ground 2. Insert the Post: Insert the pronged side into the wet concrete until the square plate rests on the surface. Ensure the side with holes does not face the direction where the fence boards will be installed. Verify the post is perfectly vertical (90° to the ground). For sections of 6", maintain a distance of 72 inches between the centers of two post holders. Please adjust accordingly for distance less than 72 inches. Allow the concrete to cure for at least 48 hours or until fully set. EP Decking - WPC Fencing Page 3 Post Holder Bolt Concrete 3. Fit the Bottom Cover: Slide the bottom board rail onto the post, ensuring it fits snugly for a finished look. G J Post Holder EP Decking - WPC Fencing G J Page 4 4. Insert Fence Board: Starting from the bottom, insert the boards horizontally. Ensure they align evenly. F G A EP Decking - WPC Fencing Page 5 5. Install Side Bar and Top Cover: Attach the side bar to the post. Fit the top board cover and secure with corner clips. G Screw E K G Screw E K 6. Attach the Post Cap: Secure the post cap to the top of the post using screws. I A G K EP Decking - WPC Fencing Page 6 Support For questions or concerns, contact us: Email: info@epdecking.com Phone: (866) 344-2600 (Sales) Enjoy Your New Fence! EP Decking - WPC Fencing Page 7