Devialet Dione

Introduction

Devialet was born of a pledge: to keep pushing the boundaries of sound experiences. Fourteen years later, after delivering groundbreaking, iconoclast innovations in the field of acoustics, Devialet ventures into the world of audio-visual. Devialet Dione, our first soundbar, materializes our latest developments in audio technology to breathe new energy into the way you watch any content. Grandiose, all-enveloping sound that complements all things visual and draws you deep into the action. Watch your senses.

Preparation

Step 1: Prepare Devialet Dione

Remove the product from its packaging and place the installation wedges on a flat surface.

Diagram description: The components shown include a drilling template, wall mount guide, the Devialet Dione soundbar, installation wedges, documentation, protective cover, power cable + HDMI, and packaging.

Positioning

Step 2: Positioning

Place Devialet Dione upside down on the installation wedges.

Caution: Do not place Devialet Dione upside down without using the installation wedges to avoid contact between the center sphere and a hard surface.

Step 3: Connect Cables

Insert the power cable into the power port, then connect the appropriate audio cable to the soundbar.

• Use the HDMI cable if your TV has an HDMI port labeled eARC/ARC.
• If your TV does not have an HDMI eARC/ARC port, use the TOSLINK optical cable.

Setup

Step 1: Connect and Power On

Connect the audio cable to the TV. Ensure the HDMI cable is plugged into the TV's HDMI eARC/ARC port, or use an Optical cable.

Then, plug Devialet Dione into a power outlet and wait until the indicator light stops flashing.

Diagram description: Shows a TV, the Devialet Dione soundbar connected via HDMI, and the HDMI cable.

Step 2: Download and Launch App

Download and launch the DEVIALET APP and follow the on-screen steps to complete setup.

Icons for App Store (?) and Google Play (▶️) are shown.

Step 3: Configure Audio Settings

Before you start listening, check your TV's audio settings and ensure the audio output is set to HDMI eARC/ARC or Optical, depending on the audio cable you are using to connect Devialet Dione to the TV. Enjoy Devialet Dione!

Connectivities

To Play via Bluetooth

• Press and hold the Devialet Dione Bluetooth button () for 2 seconds. The indicator light will blink blue, indicating Devialet Dione is ready to be paired to a Bluetooth device.
• Open the Bluetooth settings on your device and search for "Dione-XXXX".

To Play via AirPlay

• Connect Devialet Dione to the same Wi-Fi network as your Apple device.
• Play the audio track you want to stream.
• Tap the AirPlay or streaming icon.
• Choose Devialet Dione as the output speaker.

To Play via Spotify Connect

• Use your phone, tablet, or computer as a remote control for Spotify.
• Go to spotify.com/connect to learn how.

Ports and Controls

Ports:

• ① HDMI eARC/ARC: Connect the HDMI cable to the HDMI port labeled eARC/ARC on your TV or Projector.
• ② Ethernet: Use an Ethernet cable for better network stability.
• ③ Optical (TOSLINK): Use a TOSLINK Optical cable if your TV or Projector does not have an HDMI eARC/ARC port.
• ④ AC power: Connect to a power socket.

Controls & Indicators:

• Indicator light: (Details on indicator light status)
• Devialet button: Press to switch between HDMI and Optical sources. Press and hold for 7 seconds to enter standby mode. To exit standby mode, press any button on Devialet Dione.
• Volume: Press ➖ or ➕ to lower/increase volume.
• Play/Pause: Press ▶️ / || to pause or resume playback.
• Bluetooth: Press and hold  to enable Bluetooth pairing.
• Disable microphone: Press ? to disable room calibration microphones.
• Reset: Press and hold the ▶️ / || button for 6 seconds to reset Dione. ?

Optimal Placement

Shelf

Visual description: A Devialet Dione soundbar is placed on a shelf below a television.

Wall Mount

Visual description: A Devialet Dione soundbar is mounted on a wall below a television, with a wall-mount guide box nearby.