RICH SOLAR
1-800-831-9889 | www.richsolar.com | support@richsolar.com | 5550 Jurupa St, Ontario, CA 91761
Solar Controller / Battery Charger
MODEL: RS-PWM20WP
FEATURES AND ADVANTAGES
- PWM technology, switching control by MOSFET
- Common Positive Grounding connection
- High efficiency and low power consumption
- Battery type setting and battery condition indication
- Smart charging control
- Charging time management
- LED indication for the battery condition and charging statues
- Digital display charging parameters and battery settings
- Automatically active to Lithium battery against BMS protection
- Thermal protection
- Over voltage protection, Short circuit protection, Reverse polarity protection
- No sparks
- Waterproof
- Solid-duty cables
- Corrosion-resistant terminals and connectors
- Conformal coating supplied to the inside board against moisture
- Includes a port for external battery temperature sensor (BTS - optional)
- Suitable for most of the rechargeable Lead acid battery, including Flooded (WET), AGM, GEL, Calcium battery and Lithium batteries
- Designed according to CE standard, EMC, FCC compliance
MOUNTING THE DEVICE
The quickest and easiest way to mount the unit is to use the four plastic spacers and self-tapping screws supplied and mount the unit to a flat surface.
Diagram showing mounting dimensions: 33.0mm [1.299in] height, 3.7mm [0.146in] width for mounting holes. 68.0mm [2.677in] width between mounting holes. 105.5mm [4.154in] overall width. 115.3mm [4.539in] overall height. 132.6mm [5.221in] overall depth.
SPECIFICATION
ELECTRICAL PARAMETERS
Parameter | Value |
---|---|
Rated Solar Panel Amps | Max. 20AMP |
Normal Input Solar Cell Array Voltage | 15-22VDC |
Max. Solar Cell Array Voltage (Output Has no Load) | 25VDC |
The Controller Lowest Operating Voltage at Solar or Battery Side | 8VDC |
Standby Current Consumption at Night | 5mA |
Maximum Voltage Drop-Solar Panel to Battery | 0.25VDC |
CHARGING CHARACTERISTICS
Parameter | Value |
---|---|
Minimum Battery Starts Charging Voltage | 3VDC |
Soft Start Charging Voltage | 3-10±0.2VDC |
Soft Start Charging Current (50% PWM Duty) | Up to 10AMP |
Bulk Charge | By the maximum rated current |
Absorption Charging Voltage at 25°C | |
- Gel Type Battery | 14.1±0.2VDC |
- AGM Type Battery (Default Setting) | 14.4±0.2VDC |
- WET Type Battery | 14.7±0.2VDC |
- Calcium Type Battery | 14.9±0.2VDC |
- LTO Battery | 14.0±0.2VDC |
- LFP Battery | 14.4±0.2VDC |
Absorption Transits to Equalizing or Float Condition: | |
- Charging Current Drops to | 1.5±0.1AMP |
- or Absorption Charging Timer Timed out | 4 Hours |
Equalization Charging Active (Only for WET or Calcium Battery) | |
- Battery Voltage Discharged to Less Than | 10±0.2VDC |
- Automatic Equalizing Charging Periodical | 28 Day |
Equalization Charging Voltage at 25°C | 15.5±0.2VDC |
Equalization Charging Timer Timed out | 2 Hours |
Float Voltage (GEL, WET, Calcium, AGM battery) at 25°C | 13.6±0.2VDC |
Restart Voltage for LTO Battery | 13.2±0.2VDC |
Restart Voltage for LFP Battery | 13.4±0.2VDC |
Voltage Control Accuracy | ±0.1% |
Battery Temperature Compensation Coefficient | -24 mV/°C |
Temperature Compensation Range | -20~+50 °C (-4°F to 122°F) |
Over Temperature Protection During Charging | 65°C (149°F) |
PROTECTION
Parameter | Value |
---|---|
Input Output Terminal | M5 terminals |
ELECTRICAL PARTS
Parameter | Value |
---|---|
Controller Material | Plastic, Standard ABS |
Power Terminal Maximum Stranded Wire Size | #10 AWG stranded- 5 mm² |
Power Terminal Torque | Up to 17 in-lb (1.9 N·m) |
PHYSICAL PARAMETERS
Parameter | Value |
---|---|
Mounting | Vertical wall mounting |
IP Grade | IP65 |
Net Weight | Approx. 300g/0.66lb |
ENVIRONMENTAL CHARACTERISTICS
Parameter | Value |
---|---|
Operating Temperature | -25~50°C/-13~122 °F |
Storage Temperature | -40~85°C/-40~185 °F |
Operating Humidity Range | 100% no condensation |
Related Documents
![]() |
Rich Solar RS-PWM30WP Solar Charge Controller and Battery Charger Detailed specifications and features of the Rich Solar RS-PWM30WP PWM solar charge controller and battery charger, including electrical parameters, charging characteristics, protection features, physical specifications, and environmental considerations. |
![]() |
Rich Solar Bravo Series 30A PWM Solar Charge Controller RS-PWM30F Specifications and features of the Rich Solar Bravo Series 30A PWM Solar Charge Controller, model RS-PWM30F. This document details electrical parameters, charging characteristics, protection features, and environmental specifications for efficient solar energy management. |
![]() |
RICH SOLAR DC-DC 20A Battery Charger RS-DC20 The RICH SOLAR DC-DC 20A Battery Charger (Model RS-DC20) is designed for charging multiple 12V batteries including AGM, Flooded, Gel, and Lithium. It features smart protection against over-voltage, over-temperature, and reverse polarity, and combines battery isolation with charging capabilities. Built for durability, it offers a 3-stage charging process to ensure batteries reach 100% capacity. |
![]() |
Rich Solar RS-PWM30PF 30A PWM Solar Charge Controller User Manual Comprehensive user manual for the Rich Solar RS-PWM30PF 30A PWM Solar Charge Controller, covering installation, operation, charging stages, specifications, and safety guidelines. Learn how to safely and efficiently manage your solar power system. |
![]() |
Rich Solar RS-PWM10WP User Manual: Solar Controller and Battery Charger Comprehensive user manual for the Rich Solar RS-PWM10WP PWM solar controller and battery charger. Covers installation, operation, charging stages, LED indications, specifications, and maintenance. |
![]() |
RICH SOLAR RS-PWM40P 40A PWM Solar Charge Controller Technical Specifications Detailed technical specifications and features for the RICH SOLAR RS-PWM40P 40A PWM Solar Charge Controller, covering smart charging management, load management, protection features, user interface, and durability. |
![]() |
Rich Solar RS-PWM40PF 40A PWM Solar Charge Controller User Manual User manual for the Rich Solar RS-PWM40PF 40A PWM Solar Charge Controller, detailing features, installation, wiring, operation, charging stages, LED indications, and specifications. |
![]() |
Rich Solar RS-MPPT50DC MPPT DC-DC Solar Charge Controller User Manual User manual for the Rich Solar RS-MPPT50DC MPPT DC-DC solar charge controller. Covers product overview, features, specifications, installation, safety precautions, operation, and troubleshooting for efficient solar and alternator charging. |