mailto:service@wiltec.info
Wiltec - Ihr Online Shop für Haus, Garten, Werkstatt, Freizeit
Instruction Manual for wiltec models including: 30293 Sawhorse, 30293, Sawhorse
Caballete para serrar troncos madera leña soporte con asas plegable
The sawhorse consists of four legs assembled with two stabi- liser bars per side. • When assembling the saw hors, wear gloves. • Attaching the stabiliser bars ...
File Info : application/pdf, 4 Pages, 379.45KB
DocumentDocumentOperating instructions Sawhorse 30293 Illustration similar, may vary depending on model Please read and follow the operating instructions and safety information prior to initial operation. Technical changes reserved! Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further developments. The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating manual, nor in the diagrams and illustrations shown. Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating manual is complete, accurate, and up-to-date, errors cannot be ruled out entirely. If you have found an error or wish to suggest an improvement, we look forward to hearing from you. Send us an e-mail to: service@wiltec.info or use our contact form: https://www.wiltec.de/contacts/ The most recent version of this manual in several languages can be found in our online shop: https://www.wiltec.de/docsearch Our postal address is: WilTec Wildanger Technik GmbH Königsbenden 12 52249 Eschweiler Germany To return your goods for exchange, repair, or other purposes, please use the following address. Attention! To allow for a trouble-free complaint or return, it is important to contact our customer service team before returning your goods. Retourenabteilung WilTec Wildanger Technik GmbH Königsbenden 28 52249 Eschweiler Germany E-mail: service@wiltec.info Tel: +49 2403 555920 Fax: +49 2403 5559215 © by WilTec Wildanger Technik GmbH http://www.wiltec.de Item 30293 Page 2 11 2023-1 Introduction Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to always take some basic safety precautions when using this product. Please read this operating manual carefully and make sure that you understand it. Keep these operation instructions in a safe place. Safety instructions · Obey all safety and other instructions found in this manual. Also obey all instructions and the safety advice found in the manual of the chainsaw when operating this. Non-compliance with any of safety instructions might lead to serious injuries. · During work, wear appropriate protective equipment. Do not wear loose clothing or jewellery. Long hair must be tied back. · During use, wear safety goggles to protect your eyes against splinters. Moreover, wear an ear protection, work shoes, and robust gloves equipped with a cutting-protection inlay. · Only use straight pieces of wood if possible. · Make sure that the work area is sufficiently ventilated when using a chainsaw. · When using a chainsaw with cable guide, make sure that the blade does not touch the cable. · Always make sure that the workplace is well-lit. · Do not use the chainsaw if you are under the influence of alcohol, drugs, or medicine that impair consciousness. · Keep your hands away from the blade of the chainsaw. · Please note that this sawhorse is not designed for commercial or industrial use. Description and assembly · The sawhorse consists of four legs assembled with two stabiliser bars per side. · When assembling the saw hors, wear gloves. · Attaching the stabiliser bars is done using the screws and nuts M6×12 (1)M8×16 (6) (see drawing). · Screw together the legs using the screw M8×16 (6), washer M8 (5) (2×), and nut M8 (4). · Use the screw M6×12 (1), washer M6 (2) (2×), and nut M6 (3) in the long holes of the legs. Tighten the screws sufficiently, but allow the sawhorse to keep its adjusting/folding feature. · Attach the stabiliser bars using the pieces M6×12 (1) and M6 (3). Firstly, attach the lower stabiliser bar to three legs with a screw and nut at each leg. Then, attach the second stabiliser bar. Screwing to the spot where the two bars are attached to one bar is done using the screw M6×35 (7) and a nut M6 (3). · Attach the handle (8) using with 2 screws M6×12 (1) and two nuts M6 (3) on the left and right of the front and rear leg. © by WilTec Wildanger Technik GmbH http://www.wiltec.de Item 30293 Page 3 11 2023-1 Components and their name Dimensions 1 M6×12 2 M6 3 M6 4 M8 Fig. Qty. Dimensions 24 5 M8 8 6 M8×16 26 7 M6×35 4 8 (Handle) Fig. Qty. 8 4 2 4 Important note: Reproduction and any commercial use (of parts) of this operating manual, requires a written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH http://www.wiltec.de Item 30293 Page 4 11 2023-1