Gear4music Digital Piano
SDP-2 / SDP-2-WH
SETUP GUIDE
CONTENTS CHECKLIST
First, check the contents of the package and make sure you have everything you need.
Package Contents:
- Item 1: Piano Keyboard (x1)
- Item 2: Piano Stand Base (x1)
- Item 3: Piano Stand Side Panel (x1)
- Item 4: Piano Stand Side Panel (x1)
Hardware:
- Part A: Screws (x4)
- Part B: Screws (x4)
- Part C: Screws (x8)
- Part D: Screws (x4)
TOOLS REQUIRED:
⚒️ Screwdriver ✖ Allen KeyAssembly Step 1
Attach the piano stand side panels (3 and 4) to the piano stand base (2) using the provided screws. Use two screws (A) and two screws (C) for each side panel. Ensure the panels are securely fastened.
Detailed view shows inserting screw (C) through the pre-drilled hole in the side panel and into the base, then tightening with an Allen key. Another detailed view shows inserting screw (A) through the base and into the side panel, then tightening with a screwdriver.
Assembly Step 2
Place the piano keyboard (1) onto the assembled stand. Align the mounting holes on the underside of the keyboard with the corresponding holes on the stand. Secure the keyboard to the stand using four screws (D), two on each side, tightening them with a screwdriver.
Detailed view shows inserting screw (D) through the stand and into the piano keyboard, then tightening with a screwdriver.
