User Guide for Interface models including: BSC4A, BSC4A Multi-Channel Analog Output Bridge Amplifier, Multi-Channel Analog Output Bridge Amplifier, Analog Output Bridge Amplifier, Output Bridge Amplifier, Bridge Amplifier, Amplifier
BSC4A Quickstart Guide - Interface
File Info : application/pdf, 7 Pages, 504.42KB
DocumentDocumentBSC4A Quickstart Guide
BSC4A Quickstart Guide
7418 East Helm Drive · Scottsdale, Arizona 85260 · 480.948.5555 · www.interfaceforce.com
Page 1 of 7
BSC4A Quickstart Guide
Introduction
· The BSC4A Amplifier takes up to 4 Independent Inputs and turns those signals into an analog output. · ±10V and 4-20mA · 4 independent channels · For use with model 3AXX series 3-axis load cells or multiple load cells · Can be used with up to any 4 standard load cells (with mV/V output) · Inputs for Strain gage / 010 V /PT1000 · Measurement ranges 2 mV/V / 10 mV/V · 8 digital inputs / outputs · Data rate 0 Hz500Hz
Description
This 4-channel measuring amplifier for sensors with strain gauges is equipped with a USB interface. The voltage is supplied via the USB port at the back of the measuring amplifier. The measuring amplifier can be delivered with an SUBD37 connection or with 4x M12 ports. The measuring amplifier has eight digital inputs and outputs. On the backside SubD25 socket, strain gauge full-bridges and half-bridges 120 Ohm up to 1 kOhm as well as PT1000 temperature sensors and 1000 Ohm single grid strain gages or voltages 0-5V can be connected.
Options
±10V and 4-20mA output, up to 10 mV/V input, 37-pin input connector or 4 each M12 connectors and includes power supply.
Caution: Please read this entire guide before making any connections or powering the BSC4A.
7418 East Helm Drive · Scottsdale, Arizona 85260 · 480.948.5555 · www.interfaceforce.com
Page 2 of 7
BSC4A Quickstart Guide
7418 East Helm Drive · Scottsdale, Arizona 85260 · 480.948.5555 · www.interfaceforce.com
Page 3 of 7
BSC4A Quickstart Guide
Connections:
7418 East Helm Drive · Scottsdale, Arizona 85260 · 480.948.5555 · www.interfaceforce.com
Page 4 of 7
BSC4A Quickstart Guide
7418 East Helm Drive · Scottsdale, Arizona 85260 · 480.948.5555 · www.interfaceforce.com
Page 5 of 7
BSC4A Quickstart Guide
7418 East Helm Drive · Scottsdale, Arizona 85260 · 480.948.5555 · www.interfaceforce.com
Page 6 of 7
BSC4A Quickstart Guide
Note: Amplifier channels have fixed gain settings and are not adjustable for specific load cell output signals. Because of this, the amplifier output will typically be less than the nominal 10V or 20mA at load cell full scale.
Warranty
All Telemetry products from Interface Inc., ('Interface') are warranted against defective material and workmanship for a period of (1) one year from the date of dispatch. If the 'Interface' product you purchase appears to have a defect in material or workmanship or fails during normal use within the period, please contact your Distributor, who will assist you in resolving the problem. If it is necessary to return the product to 'Interface' please include a note stating name, company, address, phone number and a detailed description of the problem. Also, please indicate if it is a warranty repair. The sender is responsible for shipping charges, freight insurance and proper packaging to prevent breakage in transit. 'Interface' warranty does not apply to defects resulting from action of the buyer such as mishandling, improper interfacing, operation outside of design limits, improper repair or unauthorized modification. No other warranties are expressed or implied. 'Interface' specifically disclaims any implied warranties of merchantability or fitness for a specific purpose. The remedies outlined above are the buyer's only remedies. 'Interface' will not be liable for direct, indirect, special, incidental or consequential damages whether based on the contract, tort or other legal theory. Any corrective maintenance required after the warranty period should be performed by 'Interface' approved personnel only.
Author KB
Revision History Revision B
Release Date 10/6/2023
7418 East Helm Drive · Scottsdale, Arizona 85260 · 480.948.5555 · www.interfaceforce.com
Page 7 of 7