XG Bench Scales
- NMI Approved – 6/4C/256/ & Certificate 2450 (New Zealand)
- 304 stainless steel platter and frame assembly
- Anti-slip adjustable levelling feet
- 36-38mm 304 stainless tubal pole or SS front bracket option
- IP65 moisture protected Aluminium load cells (Optional Stainless Steel)
- 5-point overload protection
- Overload recording increments every time the scale is overloaded
Rinstrum XG series scales are sturdy, economic industrial bench scales designed for years of rugged use. Sizes range from 300mm x 300mm to 500mm x 600mm. Capacities range from 15kg single range or 6kg in multirange to 300kg in approved versions, and up to 500kg in non-trade custom versions. The scales are available with various indicator mounting options, indicators, and firmware to suit different application functionalities and working environments.
Optional M12 cables allow for fast setup and replication of saved RIS settings via a viewer, and factory calibration, making this platform series excellent for drop ship customers.
Easy Maintenance & Operation
- Clear open frame – easy to keep clean
- Removable low-sided pan – deflects splatter and aids easy cleaning
- Sturdy pan construction – no warping
- 2-Axis rotating head – for optimal operator viewing angle
Capacity and Resolution Options
| Capacity x Resolution | 300 x 300 (S) | 300 x 400 (M) | 400 x 500 (L) | 500 x 600 (XL) |
|---|---|---|---|---|
| 15 kg x 0.005 kg | ✓ | ✓ | ✓ | ✓ |
| 30 kg x 0.01 kg | ✓ | ✓ | ✓ | ✓ |
| 60 kg x 0.02 kg | ✓ | ✓ | ✓ | ✓ |
| 150 kg x 0.05 kg | ✓ | ✓ | ✓ | ✓ |
| 300 kg x 0.1 kg | ✓ | ✓ | ✓ | ✓ |
Options for customization of capacity, resolution, and base are available.
Flexible Factory Fit Mounting Options
- Options for post in either short, long, or no post for wall mounting
- Front mounting on C3 and R3 indicators
Flexible Firmware
For more complex applications:
- Setpoints
- Advanced animal weighing
Indicators
C3 Series Indicators
- Independently sealed keypad with mechanical key switches
- Gravity compensation
- 9-colour configurable RGB backlight for multi-band check weighing and indication
Note: C350 and C357 available on request.
Firmware (K301)
- Weighing Units: kg, g, t, lb, oz, TN, lb:oz
- Application Modes: Weighing, auto-tare, accumulation, parts counting, check weighing
- Comms Interface: Optional RS232, RS485, 20mA, 4-20mA / 0-10V
- Calibration: Quick, Zero, Span / 10 point linearisation, gravimetric compensation options
- Accessories: M6201 RS232 card, M6203 RS485 card
Construction
- Display: RGB Backlit LCD with six 20mm (0.8") high digits with units and annunciators, 9 segment
- Case Materials: Resin Alloy
- DC Power: Barrel connector with plug pack
- Battery: 4 x AA batteries
* Other firmware available depending on what functionality is required.
X320 Indicator
- Tough enclosure – Impact resistant composite alloy housing
- IP68 and IP69K rated
- AC/DC/Battery Power Options
- 3-band check weighing
Firmware (K376)
- Weighing Units: kg, g, t, lb, oz
- Application Modes: Weighing, auto-tare, accumulation, parts counting, check weighing
- Check Weigh Indication: 3 colour LEDs, optional light tower
- Comms Interface: RS232 included
- Calibration: Quick, Zero, Span, gravimetric compensation options
Construction
- Material: IP69k certified composite alloy
- Display: LED backlit LCD with six 20mm high digits with units and annunciators
- Keyboard: Touch capacitive with no moving parts
- Power: 120/240VAC, or battery / rechargeable factory options
Specifications
XG Scale Base Specifications
- Load Cell Composition: IP65, Aluminium (optional Stainless Steel)
- Approval: NMI: 6/4C/256 | Certificate 2450 (New Zealand)
- Frame/ Pan/ Feet Composition: 304 Stainless Steel
- Repeatability: +/- 1 division
- Linearity: +/- 1 division
Dimensions
A diagram illustrates the dimensions of the XG Scale Base, showing measurements labeled A through I for various scale sizes. The table below provides specific values.
| Dimension | 300 x 300 (S) mm | 300 x 400 (M) mm | 400 x 500 (L) mm | 500 x 600 (XL) mm |
|---|---|---|---|---|
| A* | 376 | 376 | 676 | 676 |
| B | 297.5 | 397.5 | 497.5 | 597.5 |
| C | 60.3 | 60.3 | 60.3 | 75 |
| D | 297.5 | 297.5 | 397.5 | 497.5 |
| E** | 113.5-118.5 | 112.5-117.5 | 116.5-121.5 | 136.5-151.5 |
| F** | 383.5-388.5 | 383.5-388.5 | 683.5-688.5 | 683.5-698.5 |
| G | 240 | 340 | 440 | 540 |
| H | 240 | 240 | 340 | 440 |
| I | 338.4 | 438.4 | 538.4 | 637.9 |
*Scales can be supplied with either no post, short post, long post, or front mount.
**The minimum and maximum height depending on the feet adjustment.
Additional Information
For local dealer information, please refer to the contact details provided by Rinstrum. The company website is www.rinstrum.com. A QR code is present for quick access to contact information or further details.
