User Manual for COSTWAY models including: TQ10018, Childrens Ride On Car
2.Install motors and wheels. Please find the drive motor first and disconnect the drive motor, then insert the motor into the rear axle, insert the connector wire into the hole and connect
Costway TY327939BK 6975210314176 1006837249
Children's Ride On Car TQ10018 Please read all instructions carefully and keep it for future reference. Warnings: Attention! Use it with protective equipment. Attention! Not use it in the traffic. Attention! The product is not suitable for the children under 3 years. General Warnings: The product must be installed and used under the supervision of an adult. Read through each step carefully and follow the proper order. Remove all packaging, separate and count all parts and hardware. Please ensure that all parts are correctly installed, incorrect installation can lead to a danger. We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled. Ensure a secure surface during construction, und place the product always on a flat, steady and stable surface. Please use the product carefully, as the product requires great skill, avoid accidents by the user or others, by fall or collision. Please wear suitable protective equipment during use, e.g. protective helmet, gloves, knee pads, elbow pads etc. 02 110 LBS , 15 03 2.Install motors and wheels. Please find the drive motor first and disconnect the drive motor, then insert the motor into the rear axle, insert the connector wire into the hole and connect to the power cord. (Please refer to the picture). 04 When this model does not have a front motor, insert washers on both sides of the front wheel. rear cPlug the long part of the line into the steering wheel 05 4.Install front windshield and back empennage by screws(M4*12 flat head screw) by screwsc(M4*12 and M4*14 round head screw) Only here use M4*14 round head screw 06 Please note that the rearview mirror needs to distinguish between left and right. Please insert the rearview mirror into the window. (referrer to picture) Lock Open First fix the seat with four screws, then install the seat on the car, paying attention to the buckle joints on the back of the seat. Put them in the car body. Install the seat and fix the fasteners in the seat, then rotate 90 degrees to lock it. 07 2*12V7AH/4*35W motors 110 lbs. 57.5" x 36" x 26" 3-5km/hcFor 12V 6-8km/hcFor 24V 08 110 LBS. 09 not 10 D ° ° "RC For 12V:" decrease increase 11 control is not paired. the remote 12 110 lbs WARNING: To reduce the risk of injury, adult supervision is required. Never use in roadways, near motor vehicles, on or near steep inclines or steps, swimming pools or other bodies of water; always wear shoes, and never allow more than 2 riders. 13 Welcome to visit our website and purchase our quality products! With your inspiring rating, COSTWAY will be more consistent to offer you EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE! US office: Fontana, California UK office: Ipswich Reward Points Exclusive Customer Service Personalized Recommendaons Permanent Shopping Cart Order History We would like to extend our hearelt thanks to all of our customers for taking me to assemble this product and giving us valuable feedbacks. 14Adobe PDF library 15.00 Adobe Illustrator CC 23.0 (Windows)