Instruction Manual for rapidline models including: CSC2HD Half Door Lockable Wall Unit, CSC2HD, Half Door Lockable Wall Unit, Door Lockable Wall Unit, Lockable Wall Unit, Wall Unit, Unit
Assembly Instructions: Product Code : CSC2HD Product Name: Rapid Worker Half Door Lockable Wall Unit Time Required: 35 minutes Tools Required: Screwdriver, Electric Drill, Pencil, Measuring tape/Ruler *Tools are not included. Skill Required: Easy Hard The Assembly Skill Rating is a 5-point system that shows the degree of effort needed in assembling a specific product. With 1 being easy for the average person and 5 requiring an expert. For most products, two persons are recommended. NOTE · As this is a commercial product, some intermediate skills may be required. · No pre-drill holes or markings are provided on our table or desk tops. · Please check you have all hardware before assembling. · If you are missing any hardware, please contact your Rapidline reseller. Please ensure you have the name of the item, required hardware part and quantity. · Please retain your receipt as proof of purchase to validate your warranty. · Assemble on a clean, flat, smooth surface such as a rug or carpet to avoid parts from being scratched. · Remove all wrapping materials, including staples and packing straps before you start to assemble · Keep all hardware parts out of reach of children. CAUTION · Heavy product. Do not attempt to lift or move without help · Do not tighten screws and bolts until completely assembled. · Do not use this product unless all bolts and screws are firmly secured and tightened. WARNING · If parts are missing, broken, damaged or worn stop using the product until all repairs are made. · Failure to follow these warnings could result in serious injury.Acrobat Pro DC 22.2.20191 Acrobat Pro DC 22.2.20191