Keyboard Function Description
A visual representation of the keyboard layout is provided, showing numbered keys and indicators:
- 1. CAP indication: Indicates Caps Lock status.
- 2. Type-C interface: Port for USB-C cable connection.
- 3. Toggle switch: Left position for 2.4G/OFF, right position for Bluetooth (BT).
- 4. USB receiver: Storage slot for the wireless receiver.
- 5. Charging indicator: Shows charging status.
- 6. Multi-function wheel: For various controls (e.g., volume).
Key Features:
- Stylish appearance design, 80-key layout, gasket structure, delicate and soft feel.
- Hot-swappable base, switches, and keycaps can be replaced. Users can purchase switches and personalized keycaps from various brands to DIY freely.
- The keyboard is made of solid materials and the keys are responsive.
- Two-level kickstand, with hidden independent space for USB receiver storage.
- A series of convenient FN+ key combinations are available.
- Keyboard return rate: Wired mode 1000Hz, 2.4G mode 1000Hz, wireless mode 125Hz.
- Three-mode Connection: 2.4GHz, Wireless 5.0, USB C wired.
- All keys support anti-ghosting.
Wired Mode / Keyboard ON/OFF
Diagram showing the wired connection process:
1. Switch to [Wired] mode. ➡️
2. Insert the Type-C port of the USB cable into the corresponding port on the keyboard. ➡️
3. Insert the USB port of the cable into the USB port of the computer.
Keyboard ON/OFF Instruction:
Turn the switch to wired (no USB power supply). The keyboard will be turned off, and the built-in battery will stop supplying power to the keyboard.
2.4G Connection Instruction
Diagram showing the 2.4G connection process:
1. Switch to [2.4G] mode. ➡️
2. Take out the [USB receiver] from the slot on the upper left corner of the keyboard. ➡️
3. Plug it into the USB port of the computer, then finished.
Quick 2.4G Code Pairing with Key Combination:
Manual code pairing: Press and hold the combination key "FN+~" for about 3 seconds. The blue light flashes quickly to enter the code pairing state. At this time, insert the receiver into the computer USB port. The blue light of the '~' key is on for 2 seconds, and the 2.4G connection is successful.
Note: When manually checking the code, it is necessary to place the keyboard close to the receiver.
When checking 2.4G codes, first put the keyboard into the code checking state before inserting the receiver into the computer.