Installation Guide for diyversify models including: Pony Wall and Partition Room Divider, Wall and Partition Room Divider, Partition Room Divider, Room Divider, Divider
Assembly Guides – Diyversify
Partition Room Divider | Free Shipping | ⭐️ 4.8 Rating – Diyversify
File Info : application/pdf, 12 Pages, 598.17KB
DocumentDocumentdiy versify ASSEMBLY GUIDE PONY WALL/PARTITION ROOM DIVIDER diy versify www.diyversify.com +1 855-348-4330 WHATS INCLUDED diy versify Wall Panels Mounting Brackets Finishing Caps Two-Way connectors TOOLS NEEDED Not Included Lug Connectors 1. Inspect your order thoroughly prior to installation (contact us with any issues) a. Make sure that shipment have not damaged any of the panels. b. Make sure you have all the items listed out in your "item list" (sent by email). 2. Grab a friend (optional) We always recommend having another person there to help you with kits higher than 4'f to help hold panels in place and avoid any pinch points. Page | 1 diy versify BEFORE GETTING STARTED Minimum 2in Gap 1. Positioning Panels in Their Approximate Location Roughly lay out flat against the floor a single layer of wall panels outlining the configuration of your wall. This will give you a good overview of how everything fits together. 2. Make sure the surface area you are building in is level This is important, as bottom panels will not be able to connect with each other if the floor is too uneven. For any issues or questions regarding assembly our team is here to help you Monday-Friday 9AM-5PM (EST) diy versify www.diyversify.com +1 855-348-4330 Page | 2 diy versify 1 2 Two-Way Connectors Two-Way Connectors Page | 3 diy versify 3 4 Two-Way Connectors Two-Way Connectors Page | 4 diy versify 5 6 Two-Way Connectors Two-Way Connectors Page | 5 diy versify 7 For wall kits above 4ft, skip this step and proceed to step 8. Finishing Caps Close off exposed connector holes Use the included finishing caps to close of the exposed connectors holes Simply insert the finishing caps into the open connectors until you hear a click Note The finishing caps can be challenging to get out once installed, so make sure to save this step for last when you have confirmed everything looks good. Page | 6 8 diy versify Lug Connectors Insert a lug connector in every 2-3 hole. DO NOT insert lugs in every connector hole. Doing so will create a gap between panels. Page | 7 diy versify 9 Page | 8 10 Finishing Caps diy versify Close off exposed connector holes Use the included finishing caps to close of the exposed connectors holes Simply insert the finishing caps into the open connectors until you hear a click Note The finishing caps can be challenging to get out once installed, so make sure to save this step for last when you have confirmed everything looks good. Page | 9 11 WALL MOUNTING diy versify Mounting Brackets Screws not included Choose screws appropriate for the material of your existing walls minimum screw length: 1.25" Page | 10 12 diy versify diyversify We are available for assembly support via chat, phone or email Monday-Friday 9AM-5PM (EST) hello@diyversify.com +1 855-348-4330 Page | 11