User Manual for Taotique models including: WIFI Trail Camera, HC810
A: Taotique WIFI A: First you need turn on WI-FI(press ‘WI-FI’ button on your trail camera or press ‘ON’ on your remote control key) Taotique WI-FI trail camera will generate WI-FI, just need open WI-FI setting on your phone to find that WI-FI signal and connect it, default password is 12345678 6.
Since the trail camera i a s。phisticated electronic product, if there is any QUESTION or SUGGESTION about this product, please feel free t。 contact us.
File Info : application/pdf, 23 Pages, 1.87MB
DocumentDocumentI USERMANUALI Taotique
WIFI TRAIL CAMERA
3 IIJFi)
. s 120
WiFi+App
r u r M
Q M
`E
m6
1 e uum
uum
wu
VE·
t
Detection angle
Remote
Warmly tips: Our Taotique trail camera have 365-days
quality warranty, If you have any questions, please
contact 24H after-sales with Taoyingjishu2019@hotmail.com.
Warranty
EN
Dea customer, Thanks fo you 9eat support of Victure HC810 trail cameras. This poduct has a 12MONTH warranty from the date of the purchase. We persist in pursuing customer satisfaction as our purpose and make customers become our friends with high quality and excellent customer service.
Since the trail camera i a s phisticated electronic product, if there is any QUESTION or SUGGESTION about this product, please feel free t contact us. Our friendly
custome sevice professi nals are always standing by to help and we w uld make
every e t e yu a satisfying answe If you are satisfied with our products, we sincerely invite you to share some beautiful photos and videos to other consumers for reference.
We hpe this product can meet your needs and seive yu f a lng time! Best regards,
Taotique Customer Support Team 2
Color Dispaly Screen Setup Buttons
BAA Batteries Depot
Learning key
Mode Switch
USB Port
Micro SD Card Slot
Stand Knob Port External Power Port
05
INSTALLING BATTERIES
IF USING AA ALKALINE BATTERIES
1.Pull the gap Iightly and open battery compament. 2.Reference the battery icons located on the inside of the battery compartment. lnse the batteries according to the positive and negative battery icons. 3.Close the battery compartment to resist water and dust. NOTE: Installing any of the 8-AA batteries in the wrong direction may cause the batteries to leak acid and could possibly explode, causing camera failure and damage to the battery compament.
06
BATTERIES CONT····..
IF USING 6V DC POWER SOURCE
1. Remove the rubber port cap at the bottom of the camera . Using a universal 6V DC cord, plug in to the bottom po option. 2. Run the cord to the side of the camera where there is a hook provided behind the hinge of the camera door. This will suppo the power cord and take pressure off of the connection point 3. When not in use, replace the rubber po cap at the bottom of the camera to protect the 6V DC universal plug-in port.
07
MEMORY CARD INSTALL
INSTALL MICRO-SD CARD
1. Insert the Micro SD card with the contacts facing away. The Micro SD card should slide in freely with little resistance. Continue pressing the card inward until you hear a click. This means the Micro SD card is locked in place and ready for use. 2. To remove Micro SD card, press the card inwards to release.
08
"ICKSTART
Enter t TESTm de
Slide the mode switch from OFF to TEST position to activate the camera and view the user setup screen.
There is a control panel with 8 keys when you open the caera.
09
2). press "ON " of remote control key, its red light and camera's red light go out at the same time, that means the remote control key has connected to your camera successfully.
2.C nnect the camera to App
yu can search WiFiCamerat dwnload App frm Ggle play and Apple Ste. 1.) On "TEST" mde, press " WiFi open camera's App mode.
12
2.) In your camera's WLAN, you will find this SSID
3.) Fill in the passw rd 12345678, then Wi-Fi c nnected
13
4.) press " WiFi" to return to system menu, then move power switch to ON mode.
3. Open the App to preview and download pictures.
1 ).press "ON" of remote control, thee will be blue flash, it means camera's App has turned on,
2.) In y ur camera's WLAN, y u will find this SSID , add this hot point .
14
Setup
Mode
Sub menu
Camera, video, camera& video,Timelapse
Description
Taking picture, video, picture and video, taking picture regular
Resolution 1080P,720P,WVGA(480P) Video Resolution
Video Length
10/30/60/90 Seconds
Each Video max 90 sec, default 1Osec
Record Audio
Off, On
Video With Sound
16
Setup Image Size
Interval Time Lapse Sequcence
ISO PIR Sensitivity
Language Frequency Camera ID Password Working Timer Date /Time
For1at Default Setting
Version
Sub Menu 20MP/16MP/12MP 1/5/10/30sec, 1/5/10/30Min 5/10/30/60 minutes
1/3/6/9 pictures Auto/100/200/400 High/Medium/Low UK/FR/ES/RU/POR/IT/DE
50Hz /60Hz CAMOOO 0On
00:00:00 to 23:59:59 DD/MM/YY Cancel I OK Cancel I OK V2.0
Descripti n
Image resolution Max 30 minutes delay Take pie every 5min Max 9 pies one shot
Exposure level Adjust PIR sensitivity
?languages Screen refresh rate 6 numbers or letters
4 numbers N/L N/L
Format memocard Back to default Firmware Version
17
QUESTION & ANSWER
1. How to download application? A: Open phone to scan the QR code then you can download the application.
2. How do I play the video on my phone in real time? A: Open application(Wificam) on your phone and launch wifi of your camera, connect the camera's WI-FI and operate on your mobile app then you can play the video on your phone.
3. How to correctly use Micro-SD card when first open the camera? A: Micro SD card and battery are not included in the package. It is recommended to use a Micro SD card (Class 10, up to 64GB). When first use Rinkmo WI-FI trail camera, you need to insert the Micro-SD card(Not included) then open setting on your camera to format your Micro-SD card so that the camera can correctly recognizes the SD card.
4. How does the remote control pairing the camera A: There is a small remote control key in the box, which is used to turn on/off camera's WI-FI. Move the power switch to `TEST' to turn on the camera, press the camera's `learning key' button(`learning key' can be seen from manual page-5), there will be a red flash light. At the same time press `ON' on your remote control key till its red light appear same as the camera's, that means the remote control key has connected to your camera successfully.
QUESTION & ANSWER
5. How is WI-FI works on Taotique WI-FI trail camera A: Taotique WIFI A: First you need turn on WI-FI(press `WI-FI' button on your trail camera or press `ON' on your remote control key) Taotique WI-FI trail camera will generate WI-FI, just need open WI-FI setting on your phone to find that WIFI signal and connect it, default password is 12345678
6. How to adjust camera photo/video resolution? A: You can adjust the photo/video resolution on both camera itself or on your Wificam application, you can find them in setting.
7. What system is this camera suitable for A: Taotique WI-FI trail camera application(Wifi cam) suitable for all IOS/Android terminal.
8. What to do when the SD card is full A: When Micro-SD card (Not included) is full, camera will re-record from the earliest. It will cover previous data. Please check the memory card in time to avoid miss important data.
9. Does this camera take photos and videos in the same series? A: Taotique WI-FI trail camera provide 4 shooting mode: Camera, Video, Camera and Video, Time lapse. You can choose from setting on camera itself. Only in camera and video model, they could work in the same time.
10. How to understand the 3 mode in PIR sensitivity? A: PIR sensitivity provide 3 mode: High, Medium, Low. When you choose `High', sensing distance up to 20 meters, `Medium' sensing distance up to 12 meters, `Low' sensing distance up to 8 meters. Sensitivity will also be reduced.
QUESTION & ANSWER
11. What type of SD card suitable for this camera A: Taotique WI-FI trail camera use Micro-SD card(Not included), maximum capacity is 64GB.
12. What format is the video saved? A: Video is in MP4 form, you can play it in most players.
13. What's the maximum photos / videos can a 64GB memory card hold? A: 64GB SD card can maximally hold about 14000 20MP photos or 12 hours 1080P Video.
14. is the night video clear? How far will it work with the IR function? A: Yes, it is clear with night vision. Taotique trail camera equips 44 infrared flash beads, will be able to see animals clear in the range of 65ft / 20m, and the recording trigger speed is 0.2s. Make night time photos and videos clearer.
15Is bluetooth available or wifi only ? how is it work? A: Taotique wifi trail camera is connect with phone's wifi(hotspot), not wifi from router. WiFi only, no Bluetooth. You can adjust setting and check the photo /video on the phone directly.
16. Will video upload via wifi or need to collect from the sd card each time? A: Both ways are available, You can just download all videos on the camera app after your phone/ipad connect that wifi signal, and you can also take out the sd card and download through computer.
QUESTION & ANSWER
17. How close does your phone have to be to the camera to see the pics on it? A: Camera Wi-Fi connect with your phone effective distance: indoor about 10m, outdoor 12m.
18. Does the camera support external power source A: Yes, you can use 6 volt DC for this camera, there is a power connector at the bottom, dedicated to the external power supply. Recommend using 8*1.5V AA (LR6) Alkaline batteries in this hunting camera to obtain maximum battery life.(Not included)
19. What scene is the camera suitable for? A: TaotiqueWI-FI trail camera mainly suitable for 4 scenes: Hunting, Wildlife monitoring, Farm monitoring, Home security. It is waterproof so you could use it outdoors.
20. How long is the camera warranty? A: TaotiqueWI-FI trailcamera offers 30-day money back guarantee and a 12-month warranty. As our valued customer, you could now send your ODER ID to the following mail address: Taoyingjishu2019@hotmail.com to extend the warranty to 24-month.