User Guide for Yibai Science Technology models including: SUGAR20, 2AVYG-SUGAR20, 2AVYGSUGAR20, SUGAR20 True Wireless Earbuds, SUGAR20, True Wireless Earbuds

sugar20中英说明书95×95-1116版 复制

Users Manual

Yibai Science & Technology (Shenzhen) Co., Ltd. SUGAR20 Wireless Earphone 2AVYG-SUGAR20 2AVYGSUGAR20 sugar20

Yibai Science & Technology (Shenzhen) Co., Ltd. SUGAR20 2AVYG-SUGAR20 2AVYGSUGAR20 sugar20

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • Text

File Info : application/pdf, 15 Pages, 3.65MB

TWS


b



 

1 





2



b 
1 b 2 b 3 
"coonected"b 4 ,b



 b 3b
 b 5b 4b


 /  

 2 1 2

  

 2 1


 

1 2



2


1b
252b 10 b
3b


b b


3b


     

 power on power off power off pairing disconnected

    

 "Dudu" "Dudu" battery low connected






  

b 5-35%35-70%70-100%
 24b
8b



5%4b


      

      

      

  32    


1b 2b 3b 4b 5-15°C50°Cb 60°Cb 7ab 8aab

TRUE WIRELESS EARPHONE

Attention
Please remove the sticker on the back cover of the earphones for a better visual experience.

I

T

Ear Cap

I

C

case

C

Take out the earphones from the charging case, the two earphones flash blue lights quickly. Turn on the bluethooth and find the corresponding Bluetooth name, then click to connect

Take out the earphones from the charging case, the earphones will turn on automatically.

"

"

Turn off the Bluetooth of mobile phone, the earphone will automatically shut in five minutes. Put your finger on the "touch area" for 4 seconds, the earphones will be shut.

and hold

Put the earphones into the charging case and the earphone will display a red light while charging.
Pls use the usb-c cable to get charged which is packed in the color box.
1) Delete the bluetooth name which you got connected before from your phone. 2) Touch the left and right earphones for 5 times respectively; You will see red and blue light
flash for 2 seconds at the same time. The earphones will turn on. The earphone will turn on and be waiting for pairing meanwhile. Within 10 minutes, it will finish connecting and the earphones will flash blue light. 3) Reconnect the bluetooth with your phone
Apple Iphones and some Android phones support volume control, but for some Android phones, you can only adjust the volume of the earphone. ( When you adjust the volume of the earphones, you are also adjusting the volume of your phone.) Do not touch the touch area while holding the earphones.

The earphones are paired with each other Successfully paired with the phone

Charging finishing

When put the earphones into the charging box, the indicate light will be on correspondingly.
Green light will turn off after 8 seconds.
While 5% battery, the red light will flash quickly for 4 seconds and then light off.

B
Try to listen at low volume. Listening at high volume for an extended period may result in permanent damage to your hearing. Keep your earphones and accessories out of reach of children. Children should use the earphones under the supervision of adult.
To avoid damaging to your earphones, do not disassemble or tamper with them, and do not insert any foreign matter into them.


112.24

FCC Requirement
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ­ Reorient or relocate the receiving antenna. ­ Increase the separation between the equipment and receiver. ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ­ Consult the dealer or an experienced radio/TV technician for help.