Niko Home Control Dual Dimmer with LED, white coated
Model: 154-52046
This dimmer switch allows control of two light points or light circuits. It attaches to a wall-mounted base with a click mechanism. An LED indicates whether the light is dimming up or down. Switch with push-button. Color: white coated.
Technical Data
Dual Dimmer with LED for Niko Home Control, white coated.
Function
- Dimmer push-buttons are available in a single-row (three push-buttons) or double-row (six push-buttons) configuration. The resident can use the Niko Home Control installation to dim one or two light points or groups of light points.
- The specific push-buttons on each dimmer can be arranged in groups of three.
- To mount the dimmer, press the unit onto a wall-mounted Niko Home Control base until it clicks into place.
- The functions of the push-buttons can be assigned during the programming of the installation by linking each function to the unique address of each push-button during the addressing phase. This information is then stored in the controller.
Cover Material
The cover is made of deformation-resistant polycarbonate and ASA materials and is lacquered.
Imprint
- Arrows are printed on the top and bottom push-buttons, indicating whether you are dimming up or down. A lamp symbol is printed on the middle push-button(s), indicating the favorite button. Pressing this button switches the lighting to the preset dimming level immediately.
Lens
- The top and bottom push-buttons are equipped with a small amber indicator LED (1.5 x 1.5 mm) to indicate the status of the action. The indicator LEDs can be programmed to light up either when the output is activated or deactivated. This is determined via the programming software.
Color
White lacquered (approx. NCS S 1002-B50G, RAL 000 90 00)
Fire Safety
- The plastic parts of the cover are self-extinguishing (withstand a glow-wire test of 650°C).
- The plastic parts of the cover are halogen-free.
Input Voltage
26 Vdc (SELV, Safety Extra Low Voltage)
Disassembly
Disassembly is very easy by pulling the cover off the base.
Impact Resistance
After mounting, impact resistance according to IK06 is guaranteed.
Dimensions (HxWxD)
44.5 x 44.5 x 8.6 mm
Marking
CE
Warranty
4 years warranty
For more information, visit www.niko.eu