Harman Kardon Citation 200 Owner's Manual
Important Safety Instructions
Verify Line Voltage Before Use
The Citation speaker is designed for use with 100-240 volt, 50/60 Hz AC current. Connecting to a line voltage other than intended can create a safety and fire hazard, and may damage the unit. If you have questions about voltage requirements or your area's line voltage, contact your selling dealer before plugging in the unit.
Do Not Use Extension Cords
To avoid safety hazards, use only the supplied power cord. Extension cords are not recommended. As with all electrical devices, do not run power cords under rugs or carpets, or place heavy objects on them. Damaged power cords must be replaced immediately by an authorized service center with a cord meeting factory specifications.
Handle the AC Power Cord Gently
When disconnecting the power cord from an AC outlet, always pull the plug, never the cord. If you do not intend to use the speaker for an extended period, disconnect the plug from the AC outlet.
Do Not Open the Cabinet
There are no user-serviceable components inside. Opening the cabinet may present a shock hazard, and any modification will void your warranty. If water accidentally falls inside the unit, disconnect it from the AC power source immediately and consult an authorized service center.
Product Overview
Top & Front View
The top and front of the Citation 200 speaker feature several controls and indicators:
- 1. ⏻ Power Button: Press to switch the speaker on or off.
- 2. [multifunction-button] Multi-function Button:
- Press and hold for more than 2 seconds to activate Google Assistant.
- Press to play or pause music (▶️ / ⏸️).
- Press to stop timer/alarm ringing and responses.
- Press to check battery level.
- 3. ? Microphones: Built-in microphones for voice commands.
- 4. Bluetooth Button: Press to enter Bluetooth source.
- 5. ➖ / ➕ Volume Buttons: Press to decrease or increase the volume.
Indicators
Power / Battery Indicators:
| Indicator State | Status |
|---|---|
| White (Constant) | Power on |
| Red (Blinking) | Low battery |
| White (Blinking) | Charging in process |
| White (Constant) | Charging complete |
| Off | Power off |
Google Assistant LEDs:
| LED State | Status |
|---|---|
| White (Blinking slowly) | Listening |
| White (Blinking fast) | Responding |
| Amber (Constant) | Microphone muted |
Bluetooth Status:
| LED State | Status |
|---|---|
| Blue (Scrolling) | Bluetooth pairing |
| Blue (Blinking), then off | Bluetooth connected |
Back View
The back of the Citation 200 includes:
- 1. ? Wi-Fi status indicator:
- Green: Excellent
- Yellow: Fair
- Red: Weak or disconnected
- 2. ? Type C USB connector: For battery charging of the speaker.
- 3. Microphone Mute/Unmute Slider: Push the slider to mute or unmute the microphone. The Google Assistant LEDs will light up amber when muted.
Charging
Charge through the Cradle
1. Connect the supplied charging cradle to power.
2. Dock CITATION 200 onto the cradle.
NOTES:
- Ensure the charging cradle is placed on a flat and stable surface near a wall outlet.
- Use only the provided power cord.
Charge through the USB connector
Charge CITATION 200 using a USB cable (sold separately). Connect one end to the ? Type C USB connector on CITATION 200 and the other end to the power source.
Battery Indicator
Press the [multifunction-button] to check the battery level. The indicator shows:
| Indicator State | Status |
|---|---|
| Red (Blinking) | Low battery |
| White (Blinking) | Charging in process |
| White (Constant) | Charging complete |
Power On
Power On / Off
Press the ⏻ button to switch on. To switch off, press the ⏻ button again.
| Indicator State | Status |
|---|---|
| White (Constant) | Power on |
| Off | Power off |
NOTES:
- If there is no charging or activity, CITATION 200 enters power-saving mode.
- To avoid depleting the battery, switch off CITATION 200 if you will not use it for long periods of time.
Reboot
Press and hold the ⏻ button and the [multifunction-button] for more than 10 seconds to reboot the device.
Connecting to Wi-Fi
Through the Google Home app
- Download the Google Home app on your smartphone or tablet.
- Sign in with your Google account. If you do not have one, create a new one.
- Power on your CITATION 200.
- Run the Google Home app and set up your CITATION 200 as instructed in the app. Always follow the app's instructions to complete the internet setup.
The setup involves connecting to your Wi-Fi network, typically within 10 meters (33 ft).
Through AirPlay setup on an iOS device
- Power on your CITATION 200.
- On your iOS device, go to “Settings” > “Wi-Fi”.
- Under “SET UP NEW AIRPLAY SPEAKER...”, select “Citation 200” and follow onscreen instructions to complete setup.
NOTE:
- For AirPlay users, Google Voice Assistant and Chromecast require additional setup via the Google Home app.
- For better connection quality, place the speaker as close to your wireless router as possible.
- If you encounter setup issues, ensure Bluetooth and location services are enabled on your smartphone or tablet.
Wi-Fi status indicator
The ? Wi-Fi status indicator shows the connection quality:
- Green: Excellent
- Yellow: Fair
- Red: Weak or disconnected
Using Your Citation 200
Use Voice Commands
With your CITATION 200, you can talk to Google to play music, get answers, manage everyday tasks, and control smart home devices using your voice.
- Just say "Hey Google" to get started. The CITATION 200 will respond instantly.
- Alternatively, press and hold the [multifunction-button] for more than 2 seconds to talk to Google without saying the wake word.
NOTE: For the latest voice commands, visit assistant.google.com.
Mute the microphone
To stop Google from listening, mute the microphone by switching the slider from [unmute] to [mute]. The Google Assistant LEDs will light up amber.
Chromecast built-in™
Stream music, tunes, podcasts, or playlists from over 300 music apps to your speaker by tapping the [cast-icon].
- Ensure your smartphone or tablet is connected to the same network as the Citation speaker.
- Run a Chromecast-enabled app on your smartphone or tablet.
- Play music and press the [cast-icon], then select "Citation 200".
NOTES:
- The speaker's name is assigned during Wi-Fi setup and can be changed later.
- The Citation speaker supports audio streaming but not video streaming.
AirPlay
Stream music from your iOS device to the Citation speaker using AirPlay.
- Ensure your iOS device is connected to the same network as the Citation speaker.
- To access the Control Center on an iOS device, swipe down from the upper right corner (iOS 12 or later) or swipe up from the bottom edge (iOS 11 or earlier).
- Tap the [airplay-icon] to select the connected speaker and start audio streaming from an app.
Multi-room Playback
Stream music from your Android or iOS device to multiple CITATION speakers simultaneously.
Chromecast built-in™
- Through the Google Home app, connect multiple CITATION speakers to the same network.
- Assign them to multiple rooms and create groups as needed.
- Run a Chromecast-enabled app, play music, press the [cast-icon], and select the grouped speakers.
NOTES:
- Refer to the Google Home app for more details.
- The number of speakers you can stream to depends on your network bandwidth.
AirPlay
- On an iOS device, enter the Control Center.
- Tap the [airplay-icon] to select multiple connected speakers as needed.
- Start music streaming from an app.
Bluetooth
Use your Citation speaker as an external speaker for your Bluetooth-enabled smartphone or tablet.
Connect a Bluetooth device
- Ensure your Citation 200 is connected to Wi-Fi via the Google Home app.
- When the speaker is on, press the button to enter Bluetooth pairing mode. The LED indicators will light up blue and scroll.
- Select "Citation 200" to connect. If you renamed the speaker during Wi-Fi setup, search by the new name.
- Successful connection: The LED indicators blink blue and then dim.
To connect to another Bluetooth device
- When the speaker is switched on, press and hold the button for more than 5 seconds. This clears the previously paired device and enters Bluetooth pairing mode.
- Follow Step 2 under “Connect a Bluetooth device”. If the device was previously paired, unpair “Citation 200” on that device first.
NOTES:
- Bluetooth performance can be affected by distance and environmental factors.
Playback Controls
- [multifunction-button]: Start, pause, or resume playback (▶️ / ⏸️).
NOTES: During Chromecast, AirPlay, or Bluetooth streaming, music playback pauses on the current connected device when you start playback on a second connected device.
Settings
Volume
Adjust the volume while playing music:
- Press the ➖ / ➕ buttons on the top panel.
- Adjust the volume via the Google Home app on your smartphone or tablet.
- Ask Google to adjust the volume by voice.
- Use the volume settings within your app.
Tone Controls
Adjust bass and treble levels to tailor the sound.
- Bass: To switch between bass levels (Level 1 to 4), repeatedly press the button and the ➖ button together. The LED indicators blink pink to show the current bass level (default: Level 3).
- Treble: To switch between treble levels (Level 1 to 4), repeatedly press the button and the ➕ button together. The LED indicators blink yellow to show the current treble level (default: Level 3).
Software Upgrade
The software automatically upgrades to the latest version when the speaker is connected to the Internet via a Wi-Fi network.
Restore Factory Settings
On the Citation speaker, press and hold the ⏻ button and the ➖ button for more than 10 seconds to restore factory default settings. The speaker will automatically power off and restart upon completion.
Cleaning and Maintenance
To keep the exterior surface clean, unplug the AC power cord first. Wipe the exterior surfaces gently with a clean, soft cloth.
CAUTION: Do not use alcohol, benzene, or thinner to clean the fabric surface.
Specifications
- Model Name: CITATION 200
- Power supply: 100 - 240 V ~ 50 / 60 Hz
- Output power: 50 W RMS
- Bluetooth version: 4.2
- Bluetooth transmitter frequency range: 2402 - 2480MHz
- Bluetooth transmitter power: <10 dBm (EIRP)
- Bluetooth transmitter modulation: GFSK, π/4 DQPSK, 8DPSK
- Wireless network: 802.11 a/b/g/n/ac (2.4GHz/5GHz)
- 2.4G Wi-Fi transmitter frequency range: 2412 – 2472 MHz (2.4GHz ISM Band, USA and Canada 11 Channels, Europe and others 13 Channels)
- 2.4G Wi-Fi transmitter power: <20 dBm (EIRP)
- 2.4G Wi-Fi modulation: DBPSK, DQPSK, CCK, QPSK, BPSK, 16QAM, 64QAM
- 5G Wi-Fi transmitter power: <23 dBm (EIRP)
- 5G Wi-Fi modulation: QPSK, BPSK, 16QAM, 64QAM, 256QAM
- 5G Wi-Fi transmitter frequency range: 5.15 - 5.35GHz, 5.470 - 5.725GHz, 5.725 - 5.825GHz
- Supported audio formats: HE-AAC, LC-AAC, MP3, Vorbis, WAV (LPCM), FLAC, Opus
- Dimensions (W x H x D): 7” x 8.6” x 6.8” (178 x 219 x 172mm) (strap down)
- Charging Cradle Dimensions (W x H): 4.8” x 0.6” (123 x 15mm)
- Weight: 2.85 kg (6.3lb)
- Battery type: Lithium-ion Polymer (3.6V, 4800mAh)
- Battery charge time: 3 hours (Charging Cradle or USB-C 5V/2A)
- Music play time: up to 8 hours (varies by volume level and content)
Troubleshooting
Failed to connect to Wi-Fi.
- Ensure Wi-Fi is turned on.
- Verify the correct network is selected and the password is entered correctly.
- Make sure your router or modem is on and within range.
- Confirm your Citation speaker is connected to the same wireless LAN as your smartphone or tablet.
The Google Home app cannot find the device.
- Ensure your Citation speaker is powered on.
- Check that your network is working properly.
- Verify your router or modem is powered on and within range.
No response to the voice command.
- Ambient conditions (noisy environment, strong winds, echoes) may prevent the speaker from detecting the voice command "Hey Google". Avoid placing the speaker in such locations.
- Ensure the built-in microphones are not muted.
Trademarks
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. HARMAN International Industries, Incorporated uses these marks under license. Other trademarks and trade names belong to their respective owners.
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
Apple®, AirPlay®, iPad®, iPad Air®, iPad Pro®, and iPhone® are trademarks of Apple Inc., registered in the U.S. and other countries. The "Works with Apple" badge signifies that an accessory is designed to work with the badge's technology and meets Apple performance standards. iOS 11.4 or later is required to control AirPlay 2-enabled speakers.
Google, Android, Google Play, Google Home, and other marks are trademarks of Google LLC. Chromecast built-in may require subscriptions. Google Assistant requires an internet connection and may not be available in all countries or languages. Feature and service availability is device, service, and network-dependent. Controlling smart home devices requires compatible smart devices. Subscriptions for services and applications may be required and are subject to additional terms, conditions, and charges.
