Logitech H600 Wireless Headset

Complete Setup Guide

Know Your Product

The Logitech H600 Wireless Headset features:

Included accessories:

Headset controls and indicators:

Charging and Connecting the Headset

  1. Step 1: Charge the headset. Connect the headset to a computer using the USB-A charging cable. Charge for 3 hours, or until the status light turns solid green.

    [Image: Headset connected to a laptop via a USB-A charging cable. A close-up shows the USB-A receiver being plugged into a USB port on the laptop.]

  2. Step 2: Connect the receiver and power on. Connect the USB-A receiver to a USB-A port on your computer. Connecting to a USB hub is not recommended. Then, power on your headset.

    [Image: Laptop with USB-A receiver connected. Headset is shown powered on, with an indicator showing the power switch position.]

Headset Fit

  1. Adjust headset size by moving the headband up and down until it fits comfortably.

    [Image: Diagram showing arrows indicating adjustment of the headband up and down.]

  2. Move the microphone boom up or down until it is level with your mouth for better voice capture.

    [Image: Diagram showing arrows indicating adjustment of the microphone boom up and down.]

  3. Tuck the right-sided boom inside the headband and out of the way when you're not using it.

    [Image: Diagram showing the microphone boom being folded and tucked into the headband.]

  4. Fold up the lightweight headset like sunglasses for portability.

    [Image: Diagram showing the headset being folded for compact storage.]

For more information, visit: www.logitech.com/support/H600

Models: H600 Headset Wireless

File Info : application/pdf, 15 Pages, 2.30MB

PDF preview unavailable. Download the PDF instead.

sucre-h600-web-qsg

References

Adobe PDF Library 15.0 Adobe InDesign CC 2017 (Macintosh)