Ubiquiti RP-5AC-Gen2

Model: 642-00051-01

Safety Notices

Read, follow, and keep these instructions.
Heed all warnings.
Only use attachments/accessories specified by the manufacturer.

[Warning] Failure to provide proper ventilation may cause fire hazard. Keep at least 20 mm of clearance next to the ventilation holes for adequate airflow.
[Warning] To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
[Warning] Do not use this product in location that can be submerged by water.
[Warning] Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.

Electrical Safety Information

Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer's label. Connection to a different power source than those specified may result in improper operation, damage to the equipment, or pose a fire hazard if the limitations are not followed.
There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician.
This equipment is provided with a detachable power cord which has an integral safety ground wire intended for connection to a grounded safety outlet.
- Do not substitute the power cord with one that is not the provided approved type. Never use an adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the grounding wire.
- The equipment requires the use of the ground wire as a part of the safety certification, modification or misuse can provide a shock hazard that can result in serious injury or death.
- Contact a qualified electrician or the manufacturer if there are questions about the installation prior to connecting the equipment.
- Protective earthing is provided by Listed AC adapter. Building installation shall provide appropriate short-circuit backup protection.
- Protective bonding must be installed in accordance with local national wiring rules and regulations.

Radiation Exposure Statement

This equipment should be installed and operated with a minimum distance 20 cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Technical Specifications

Operating Frequency (MHz)	Max. RF Output Power
5150-5350	≤ 23 dBm
5470-5725	≤ 30 dBm
5725-5875	≤ 36 dBm

Usage Restrictions

This device is restricted to indoor use only when operating in the 5150 - 5350 MHz frequency range within all member states.
Operation in the 5.8 GHz frequency band is prohibited in BFWA member states.

Declaration of Conformity

Hereby, UBIQUITI, declares that this device, RP-5AC-Gen2, is in compliance with the essential requirements and other relevant provisions of Directives 2014/53/EU, 2014/30/EU, and 2014/35/EU. The full text of the EU declaration of conformity and detailed compliance information is available at the following internet address: ui.com/compliance

	Ubiquiti Rocket Prism 5AC Gen2 Datasheet Datasheet for the Ubiquiti Rocket Prism 5AC Gen2, a 5 GHz airMAX ac wireless base station featuring airPrism technology for enhanced performance in high-density areas. Includes technical specifications, features, and application examples.
	Ubiquiti UX7 Safety and Compliance Information Comprehensive safety notices, battery warnings, electrical safety information, radiation exposure statements, operating frequencies, power levels, and declaration of conformity for the Ubiquiti UX7 wireless networking device.
	Ubiquiti U7-Pro-Wall Safety and Compliance Information This document provides essential safety, electrical safety, and radiation exposure information for the Ubiquiti U7-Pro-Wall device, along with the EU and UK Declaration of Conformity.
	Ubiquiti U7-Outdoor Safety and Compliance Information This document provides essential safety, electrical, and radiation exposure information for the Ubiquiti U7-Outdoor device, along with declarations of conformity for various regions.
	Ubiquiti RP-5AC-Gen2 Quick Start Guide This guide provides instructions for setting up and installing the Ubiquiti RP-5AC-Gen2 radio, including package contents, installation requirements, hardware description, installation steps, and safety information.
	Ubiquiti E7 Installation Guide and Safety Information Comprehensive installation guide and safety information for the Ubiquiti E7 wireless access point, covering safety notices, electrical safety, radiation exposure, operating frequencies, and compliance declarations.
	Configuring Point-to-Point Links with Ubiquiti NS-5AC-L A step-by-step guide to configuring Ubiquiti NS-5AC-L devices for Point-to-Point (PtP) wireless links, focusing on the 5GHz frequency for increased bandwidth and reduced interference. This manual covers setting up one device as an Access Point PtP and another as a Station PtP to extend network connectivity.
	Ubiquiti U7-Pro-Max Safety and Compliance Information This document provides essential safety, electrical safety, and radiation exposure information for the Ubiquiti U7-Pro-Max device, along with the Declaration of Conformity.