MAXbuds True Wireless Earbuds + Emergency Power Bank

Introduction

Introducing Maxbuds! An extremely compact pair of headphones that come in a case just as great as the headphones. The case acts as a charger for not only the headphones but for your phone. This case has a digital display that will show the battery status for both headphones and make it easier to charge and use them. Never be without power again as long as you have these bad boys on you.

Package Contents

• 2x Individual Earbuds
• 1x Charging Case
• 1x Charging Cable
• 4x Silicone Earbud tips

Product Overview

The product consists of true wireless earbuds and a charging case. The earbuds feature a touch sensor ? on each, a pairing indicator light, and replaceable earbud tips for a comfortable fit ?. The charging case has a high capacity ? and includes a digital display showing battery status (e.g., "100%"), a Micro USB port for charging the case, and a Power Bank USB port to charge external devices like a phone.

Specifications & Features

• Touch Sensor
• Bluetooth v 5.0
• Noise Isolating
• Up to 60 Foot Range
• Up to 3 Hours of Continuous Play
• Pre-Paired Technology
• Anti-Interference Transmitter
• Ergonomic Fit
• Smart Display with Accurate Battery Display

How to Use

Charging Case:

1. Connect the Micro USB end of the provided Charging Cable into the Micro USB Port of the Charging Case.
2. Connect the USB end of the USB Cable into any USB Charging Port.
3. While charging, the Charging Case Indicator Lights will blink.

Charging Earbuds:

1. Charge the Earbuds by placing them into the already charged case.
2. The Ear Bud Indicator Lights will glow red while being charged.
3. All Indicator Lights will turn off once the earbuds are fully charged.

Pair Both Earbuds (TWS):

1. Take the two earbuds out of the charging case.
2. The earphones will automatically turn on and automatically pair. (Voice prompt: power on, left channel, right channel, waiting for connection)
3. Turn on the Bluetooth on your phone and click on the connection pair name "Max" to connect and wait for the voice prompt "Connected."

Make a Call:

1. Connect the earbuds to your Phone's Bluetooth.
2. Use your Phone's interface to make, or receive, a call.

Touch Sensor:

1. Single tap on either earbud to pause, and repeat to play.
2. Double tap left earbud to play the next song, double tap the right earbud to play previous song.
3. Triple tap right earbud for volume down - triple tap left earbud for volume up.
4. Long press either earbud for Google Assistant, or Siri.

Listen to Music:

1. Connect the earbuds to your Phone's Bluetooth.
2. Use your Phone's interface to select your music.
3. Once paired, music will automatically play through the earbuds.

Turn Off the Earbuds:

1. Place your earbuds into the case to turn them off.

Care and Safety

• Do not use this unit for anything other than its intended use.
• Keep the unit away from heat source, direct sunlight, humidity, water or any other liquid.
• Do not expose the device to extremely high or low temperatures, as it may damage the battery.
• Do not operate the unit if it has been wet or moist to prevent against electric shock and/or injury to yourself and damage to the unit.
• Do not use the unit if it has been dropped or damaged in any way.
• Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
• Keep the unit out of reach of children.
• This unit is not a toy.

Battery Disposal:

This product contains a lithium polymer battery. Lithium polymer batteries are environmentally safe when fully discharged. Please refer to your local and state laws for battery disposal procedures.