Index of /
Home | DrayTek
MyVigor - DrayTekHome | DrayTek
User Guide for DrayTek models including: VigorAP 903, 802.11ac Access Point, VigorAP 903 802.11ac Access Point, Access Point
16 pagine
File Info : application/pdf, 16 Pages, 512.34KB
DocumentDocumenti VigorAP 903 802. 11ac Access Point Quick Start Guide Version: 1. 3 Firmware Version: V1. 4. 2 (For future update, please visit DrayTek web site) Date: December 23, 2021 ii Intellectual Property Rights (IPR) Information Copyrights Trademarks © All right s reserved. This publicat ion cont ains inf ormat ion t hat is prot ect ed by copyright . No part may be reproduced, t ransmit t ed, t ranscribed, st ored in a ret rieval syst em, or t ranslat ed int o any language wit hout writ t en permission f rom t he copyright holders. The f ollowing t rademarks are used in t his document : Microsof t is a regist ered t rademark of Microsof t Corp. Windows, 8, 10 and Explorer are t rademarks of Microsof t Corp. Apple and Mac OS are regist ered t rademarks of Apple Inc. Ot her product s may be t rademarks or regist ered t rademarks of t heir respect ive manuf act urers. Safety Instructions and Approval Safety Instructions Read t he inst allat ion guide t horoughly bef ore you set up t he device. The device is a complicat ed elect ronic unit t hat may be repaired only be aut horized and qualif ied personnel. Do not t ry t o open or repair t he device yourself . Do not place t he device in a damp or humid place, e. g. a bat hroom. Do not st ack t he devices. The device should be used in a shelt ered area, wit hin a t emperat ure range of 0 t o +45 Celsius. Do not expose t he device t o direct sunlight or ot her heat sources. The housing and elect ronic component s may be damaged by direct sunlight or heat sources. Do not deploy t he cable f or LAN connect ion out door t o prevent elect ronic shock hazards. Keep t he package out of reach of children. When you want t o dispose of t he device, please f ollow local regulat ions on conservat ion of t he environment . Warranty We warrant t o t he original end user (purchaser) t hat t he device will be f ree f rom any def ect s in workmanship or mat erials f or a period of t wo (2) years f rom t he dat e of purchase f rom t he dealer. Please keep your purchase receipt in a saf e place as it serves as proof of dat e of purchase. During t he warrant y period, and upon proof of purchase, should t he product have indicat ions of f ailure due t o f ault y workmanship and/ or mat erials, we will, at our discret ion, repair or replace t he def ect ive product s or component s, wit hout charge f or eit her part s or labor, t o what ever ext ent we deem necessary t ore-st ore t he product t o proper operat ing condit ion. Any replacement will consist of a new or re-manuf act ured f unct ionally equivalent product of equal value, and will be of f ered solely at our discret ion. This warrant y will not apply if t he product is modif ied, misused, t ampered wit h, damaged by an act of God, or subj ect ed t o abnormal working condit ions. The warrant y does not cover t he bundled or licensed sof t ware of ot her vendors. Def ect s which do not signif icant ly af f ect t he usabilit y of t he product will not be covered by t he warrant y. We reserve t he right t o revise t he manual and online document at ion and t o make changes f rom t ime t o t ime in t he cont ent s hereof wit hout obligat ion t o not if y any person of such revision or changes. i Declaration of Conformity Hereby, DrayTek Corporat ion declares t hat t he radio equipment t ype VigorAP 903 is in compliance wit h Direct ive 2014/ 53/ EU. The f ull t ext of t he EU declarat ion of conf ormit y is available at t he f ollowing int ernet address: ht t p: / / www. drayt ek. com. t w/ f t p/ VigorAP 903/ Document / CE/ Manuf act urer: DrayTek Corp. Addr ess: No. 26, Fu Shing Road, HuKou Township, HsinChu Indust rial Park, Hsin-Chu Count y, Taiwan 303 Product : VigorAP 903 Frequency Inf ormat ion f or Europe area: 2. 4G WLAN 5G WLAN 2412MHz - 2472 MHz, max. TX power: 19. 98dBm *1 5160MHz - 5340 MHz, max. TX power: 22 dBm ; *2 5480MHz - 5720 MHz, max. TX power: 27. 13 dBm Requirement s in AT/ BE/ BG/ CZ/ DZ/ DK/ EE/ FR/ DE/ IS/ IE/ IT/ EL/ ES/ CY / LV / LI / LT/ LU/ HU / MT/ NL/ NO/ PL/ PT/ RO/ SI/ SK/ TR/ FI/ SE/ CH/ UK/ HR. 5150MHz~5350MHz is f or indoor use only. (*1: f or 2. 4G WLAN model; *2: f or 5G WLAN model) This product is designed f or 2. 4GHz and 5GHz WLAN net work t hroughout t he EC region. Regulatory Information Federal Communicat ion Commission Int erf erence St at ement This equipment has been t est ed and f ound t o comply wit h t he limit s f or a Class B digit al device, pursuant t o Part 15 of t he FCC Rules. These limit s are designed t o provide reasonable prot ect ion against harmf ul int erf erence in a resident ial inst allat ion. This equipment generat es, uses and can radiat e radio f requency energy and, if not inst alled and used in accordance wit h t he inst ruct ions, may cause harmf ul int erf erence t o radio communicat ions. However, t here is no guarant ee t hat int erf erence will not occur in a part icular inst allat ion. If t his equipment does cause harmf ul int erf erence t o radio or t elevision recept ion, which can be det ermined by t urning t he equipment of f and on, t he user is encouraged t o t ry t o correct t he int erf erence by one of t he f ollowing measures: Reorient or relocat e t he receiving ant enna. Increase t he separat ion bet ween t he equipment and receiver. Connect t he equipment int o an out let on a circuit dif f erent f rom t hat t o which t he receiver is connect ed. Consult t he dealer or an experienced radio/ TV t echnician f or help. This device complies wit h Part 15 of t he FCC Rules. Operat ion is subj ect t o t he f ollowing t wo condit ions: (1) This device may not cause harmf ul int erf erence, and (2) This device may accept any int erf erence received, including int erf erence t hat may cause undesired operat ion. ii USA Local Represent at ive Company name Ad d r ess ZIP Code Cont act Person ABP Int ernat ional Inc. 13988 Diplomat Drive Suit e 180 Dallas TX 75234 75234 E-mail rmesser@abpt ech. com Mr. Robert Tel . 19728311600 Messer Caut ion Any changes or modif icat ions not expressly approved by t he grant ee of t his device could void t he user's aut horit y t o operat e t he equipment . Any changes or modif icat ions not expressly approved by t he part y responsible f or compliance could void t he user's aut horit y t o operat e t his equipment . This t ransmit t er must not be co-locat ed or oper at ing in conj unct ion wit h any ot her ant enna or t ransmit t er. Radiat ion Exposure St at ement : This equipment compli es wit h FCC radiat ion exposure limit s set f ort h f or an uncont rolled environment . This equipment should be inst alled and operat ed wit h minimum dist ance 20cm bet ween t he radiat or & your body. Operat ions in t he 5. 15-5. 25GHz band are rest rict ed t o indoor usage only. * The ext ernal power supply used f or each product will be model dependent . A Manuf act urer B Address C Model ident if ier D Input volt age E Input AC f requency Out put volt age DC F Out put current G Out put power H Average act ive ef f iciency I Ef f iciency at low load 10% J No-load power consumpt ion 1 DVE No. 5, Baogao Rd, Xindian Dist , New Taipei Cit y (23144), Taiwan DSA-12PF09-12 FUK DSA-12PF09-12 FEU 100~240V 50/ 60Hz 12. 0V 1. 0A 12. 0W 83. 3% 80. 8% 0. 06W 2 DVE No. 5, Baogao Rd, Xindian Dist , New Taipei Cit y (23144), Taiwan. R. O. C DSA-18PFR-12 FUK DSA-18PFR-12 FEU 100~240V 50/ 60Hz 12. 0V 1. 5A 18. 0W 85. 5% 83. 7% 0. 07W * Ext ernal power supply (Power Adapt er) inf ormat ion. For more updat e, please visit www. drayt ek. com. iii Table of Contents 1. Package Content .................................................................................................. 1 2. Panel Explanation................................................................................................. 2 3. Installation............................................................................................................. 4 4. Connection and Configuration ............................................................................ 6 Connected As a Mesh Node (in Mesh Network) .............................................................................. 7 Connected As an Access Point ........................................................................................................ 7 5. Customer Service ............................................................................................... 10 Be a Registered Owner .................................................................................................................. 10 Firmware & Tools Updates ............................................................................................................. 10 iv 1. Package Content Take a look at t he package cont ent . If t here is anyt hing missed or damaged, please cont act DrayTek or dealer immediat ely. Access Point Ant enna RJ-45 Cabl e (Et hernet ) Quick St art Guide The t ype of t he power adapt er depends on t he count ry t hat t he AP will be inst alled: UK-t ype power adapt er EU-t ype power adapt er USA/ Taiwan-t ype power adapt er AU/ NZ-t ype Power Adapt er Not e The ant enna/ t ransmit t er should be kept at least 20 cm away f rom human body. The maximum power consumpt ion is 16 Wat t . 1 2. Panel Explanation LED ACT USB 2. 4G 5G LAN A1 - A4 LAN B Status Of f Bl i nki ng On Bl i nki ng On Of f Bl i nki ng On Of f Bl i nki ng On Of f Bl i nki ng On Of f Bl i nki ng Explanation The syst em is not ready or is f ailed. The syst em is ready and can work normally. A USB device is connect ed and act ive. The dat a is t ransmit t ing. Wireless f unct ion is ready. Wireless f unct ion is not ready. Dat a is t ransmit t ing (sending/ receiving). Wireless f unct ion is ready. Wireless f unct ion is not ready. Dat a is t ransmit t ing (sending/ receiving). A normal connect ion (rat e wit h 100M/ 1000M) is t hrough it s corresponding port . LAN is disconnect ed. Dat a is t ransmit t ing (sending/ receiving). A normal connect ion (rat e wit h 100M/ 1000M) is t hrough it s corresponding port . LAN is disconnect ed. Dat a is t ransmit t ing (sending/ receiving). 2 Interface LAN B LAN A4, A3, A2 A1 (PoE) Description Wireless band will be swit ched / changed according t o t he but t on pressed and released. For example, 2. 4G (On) and 5G (On) in def ault . 2. 4G (Of f ) and 5G (On) pressed and released t he but t on once. 2. 4G (On) and 5G (Of f ) pressed and released t he but t on t wice. 2. 4G (Of f ) and 5G (Of f ) pressed and released t he but t on t hree t imes. WPS - When WPS f unct ion is enabled by web user int erf ace, press t his but t on f or more t han 2 seconds. The rout er will wait f or any wireless client connect ing t o it t hrough WPS. Rest ore t he def ault set t ings. Usage: Turn on t he rout er. Press t he but t on and keep f or more t han 10 seconds. Then t he rout er will rest art wit h t he f act ory def ault conf igurat ion. Connect er f or xDSL / Cable modem (Giga level) or rout er. Connect er f or xDSL / Cable modem (Giga level) / comput er or rout er. LAN A1 is used f or PoE connect ion (f or indoor use). PWR: Connect er f or a power adapt er. Connect er f or a USB device (f or t emperat ure sensor). Power swit ch. Not e For t he sake of securit y, make t he accessory kit away f rom children. Remove t he prot ect ive f ilm f rom t he access point bef ore use t o ensure vent ilat ion. 3 3. Installation This sect ion will guide you t o inst all t he AP t hrough hardware / wall-mount ing connect ion. For hardware connect ion, ref er t o t he f ollowing st eps t o connect your devices correct ly. 1. Connect VigorAP 903 t o xDSL modem, rout er, or swit ch/ hub in your net work t hrough t he LAN A port of t he access point by Et hernet cable. You can also connect VigorAP 903 t o a Vigor rout er via wireless connect ion. For det ailed inf ormat ion, ref er t o VigorAP 903 User' s Guide. 2. Connect a comput er t o ot her available LAN A port . Make sure t he subnet IP address of t he PC is t he same as VigorAP 903 management IP, e. g. , 192. 168. 1. X. 3. Connect t he A/ C power adapt er t o t he wall socket , and t hen connect it t o t he PWR connect or of t he access point . 4. Power on VigorAP 903. 5. Check all LEDs on t he f ront panel . ACT LED should blink, LAN LEDs should be on if t he access point is correct l y connect ed t o t he xDSL modem, rout er or swit ch/ hub. 4 For wall-mount ing, ref er t o t he f ollowing st eps. 1. Drill t wo holes on t he wall. The dist ance bet ween t he holes shall be 80mm. The recommended drill diamet er shall be 6. 5mm (1/ 4" ). 2. Fit screws int o t he wall using t he appropriat e t ype of wall plug. 3. Hang t he VigorAP direct ly ont o t he screws. 5 4. Connection and Configuration This sect ion will guide you t o conf igure AP set t ings t o est ablish wireless net work t hrough a web browser. 1. Make sure your PC connect s t o t he device correct ly. 2. Open a web browser on your PC and t ype http:/ / 192. 168. 1. 2. A pop-up window will open t o ask f or username and password. Pease t ype " admin/ admin" on Username/ Password and click Login. Not e You may eit her simply set up your comput er t o get IP dynamically f rom t he rout er or set up t he IP address of t he comput er t o be in t he same subnet as the IP address of VigorAP 903. If t here is no DHCP server on t he net work, t hen VigorAP 903 will have an IP address of 192. 168. 1. 2. If t here is DHCP available on t he net work, t hen VigorAP 903 will receive it s IP address via t he DHCP server. If you connect t o VigorAP by wireless LAN, you could t ry t o access t he web user int erf ace t hrough ht t p: / / vigorap. com. 6 Connected As a Mesh Node (in Mesh Netw ork) Inst all VigorAP on t he place you want . As a mesh node, set t ings relat ed t o VigorAP 903 must be conf igured by a remot e Mesh Root (e. g. , VigorAP 903) wit hin t he mesh net work. The user must det ect VigorAP 903 via a Mesh Root t o add it as a mesh node. Connected As an Access Point As an access point , VigorAP 903 must be connect ed t o a rout er and conf igured in AP (Access Point ) / Range Ext ender mode. Connect VigorAP t o a Vigor rout er. Use a t wist ed-pair cable wit h RJ-45 plugs at bot h ends, and plug int o Et hernet device (e. g. , Vigor rout er) and Et hernet port of VigorAP. 7 There are two methods t o conf igure VigorAP. Method 1: (a) First , open a web browser on your PC and t ype https:/ / 192. 168. 1. 2. A pop-up window will open t o ask f or username and password. (b) Af t er clicking Login, Quick Start Wizard f or conf iguring wireless set t ings will appear as f ollows. (c) Follow t he on-screen st eps t o f inish t he net work connect ion. 8 Method 2: (a) Use a mobile phone t o scan t he QR code named wit h DrayTek Wireless App t o download DrayTek Wireless APP. (b) Af t er downloading, run t he APP. (c) From t he home page, click t he Connect icon t o access t he Connect page. Next , press t he QR code icon next t o Scan QR Code on your phone screen t o open t he camera. Then, scan t he QR code named wit h Connect SSID. (Or, ent er t he SSID and t he password set f or t he AP. ) Lat er, click t he Connect but t on t o access t he web user int erf ace of VigorAP 918R t o set t he device in AP or ot her mode. 9 5. Customer Service If t he device cannot work correct ly af t er t rying many ef f ort s, please cont act your dealer/ DrayTek f or f urt her help right away. For any quest ions, please f eel f ree t o send e-mail t o " support @drayt ek. com" . Be a Registered Ow ner Web regist rat ion is pref erred. You can regist er your Vigor rout er via ht t ps: / / myvigor. drayt ek. com. Firmw are & Tools Updates Due t o t he cont inuous evolut ion of DrayTek t echnology, all rout ers will be regularly upgraded. Please consult t he DrayTek web sit e f or more inf ormat ion on newest f irmware, t ools and document s. ht t ps: / / www. drayt ek. com GPL Notice This DrayTek product uses sof t ware part iall y or complet ely licensed under t he t erms of t he GNU GENERAL PUBLIC LICENSE. The aut hor of t he sof t ware does not provide any warrant y. A Limit ed Warrant y is of f ered on DrayTek product s. This Limit ed Warrant y does not cover any sof t ware applicat ions or programs. To downl oad source codes please visit : ht t p: / / gplsource. drayt ek. com GNU GENERAL PUBLIC LICENSE: ht t ps: / / gnu. org/ licenses/ gpl-2. 0 Version 2, June 1991 For any quest ion, please f eel f ree t o cont act DrayTek t echnical support at support @drayt ek. com f or f urt her inf ormat ion. 10