Waterpik Waterflosser

1. First Use

Illustration showing a hand filling the water reservoir with warm water and then placing it firmly back onto the base of the water flosser.

Fill reservoir with warm water and replace it firmly on the base.

Illustration showing a hand inserting the flossing tip into the handle. An arrow indicates the 'Insert' action.

Insert tip firmly until it clicks into place.

Illustration showing the power and water switches on the unit. An indicator shows 'Water ON' with an arrow pointing to the sink.

Turn pressure to high, point tip into sink, turn power and water switches on until water flows. Then turn off.

2. Start Water Flossing

TO AVOID MESS: PLACE THE TIP IN YOUR MOUTH BEFORE TURNING UNIT ON

Illustration of the water flosser handle with a tip inserted, held ready for use.

Turn power and water on. Start on low pressure and increase to your liking.

3. Lean Over Sink

Illustration showing a person leaning over a sink, using the water flosser. Water is depicted flowing from their mouth into the sink.

Close lips enough to prevent splashing, while still allowing water to flow from mouth into the sink.

4. Technique

Close-up illustration of teeth and gums, showing the water flosser tip aimed at the gumline at a 90-degree angle. Arrows indicate movement along the gumline and pausing between teeth.

Aim water at the gumline at a 90° angle. Follow the gumline and pause briefly between teeth.

5. How to Video

Visit waterpik.com/vid860

Register your product and receive over $50 in savings. Visit waterpik.com/registration