Beeper XR5 Quick Start Guide
This guide provides essential information for installing and using your Beeper XR5 car alarm system.
Safety Instructions
Before using your product, please read the precautions for use and safety instructions. The system operates on 12V DC. Ensure correct polarity of all wires. Check vehicle components before and after installation. Ensure the main ground connection is stable. Protect wires passing through tight spaces with adhesive tape. Conceal system wires and accessories as much as possible. Use a digital multimeter for wire polarity. Be cautious when disconnecting the battery, especially if the vehicle has a coded radio or airbags. Remove the dome light fuse during installation to prevent battery drain.
Kits Components
The Beeper XR5 system includes the following components:
- A: Central-Siren
- B: 2-button remote control
- C: Infrasonic sensor
- D: Microwave sensor
- E: Magnetic sensor
- F: Movement detector
- G: Wireless contacts
- H: Hood switch
Available kits include:
- XR5: A+B+C
- XRCAB: A+B+D
- XR5CC: A+B+C+E+F+G+H
- XR5VUL: A+B+C+D+E+G+H
Installation Plan
Wiring Diagram:
- Red wire: +12V Permanent battery
- White wire: Do not connect. This wire is for coding a module or remote control only.
- Black wire: Ground (-) battery
Warning: For the installation of various sensors and the use of the alarm and its remote controls, refer to the complete technical manual by scanning the QR code or visiting the website.
Technical Data
Control Unit-Siren (ref. XR5-SIRO1)
- Power supply: DC 10-16V
- Consumption in activation: < 12 mA
- Consumption during tripping: 500 mA
- Max consumption (siren output): 1.2 A
- Receiver sensitivity: -109 dB
- Receiver frequency: 433.92 MHz±150 KHz
- Operating temperature: -20°C / +85°C
2-Button Remote Control (ref. XR5-TX1)
- Power supply: 2 CR2032 3V batteries
- Frequency: 433.92 MHz±150 KHz
- Transmission current: < 10 mW
- Static current: <2 uA
- Current in TX transmission: < 6 mA
- Operating temperature: -20°C / +85°C
Technical data for individual radio modules is available in the complete technical manual.
Warranty and Technical Assistance
This product is guaranteed for 3 years. For any issues encountered during the warranty period, please consult the warranty and after-sales service conditions available on the Beeper website: www.beeper.fr.
Declaration of Compliance
The universal alarm type radio equipment complies with the RED directive (2014/53/EU). The full text of the EU declaration of conformity is available on the Beeper website: www.beeper.fr.
Further Information
Find the complete technical manual on the Beeper website at: http://urlr.me/LrV3t or by scanning the QR code.
