ViewSonic VS18884 Direct View LED Display User Guide

User Guide for ViewSonic models including: LDP135-151, VS18884, VS18884 Direct View LED Display, VS18884, Direct View LED Display, View LED Display, LED Display, Display

Download

Direct View LED Display - ViewSonic Direct View LED Display

File Info : application/pdf, 164 Pages, 45.08MB

1123764

LDP135-151
All-in-One Direct View LED Display User Guide
IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User
Guide will describe your limited coverage from ViewSonic® Corporation, which is also found on our web site at http://www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right
corner of our website.
Model No. VS18884 P/N: LDP135-151

Thank you for choosing ViewSonic®
As a world-leading provider of visual solutions, ViewSonic® is dedicated to exceeding the world's expectations for technological evolution, innovation, and simplicity. At ViewSonic®, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic® product you have chosen will serve you well.
Once again, thank you for choosing ViewSonic®!
2

Safety Precautions
Please read the following Safety Precautions before you start using the device. · Keep this user guide in a safe place for later reference. · Read all warnings and follow all instructions. · Ensure there is no direct airflow from air conditioning blowing on the display. · Do not use the device near water. To reduce the risk of fire or electric shock, do
not expose the device to moisture. · Avoid exposing the device to direct sunlight or other sources of sustained heat. · Do not install near any heat sources such as radiators, heat registers, stoves, or
other devices (including amplifiers) that may increase the temperature of the device to dangerous levels. · When moving the device, be careful not to drop or bump the device on anything. · Do not place the device on an uneven or unstable surface. The device may fall over resulting in an injury or a malfunction. · Do not place any heavy objects on the device or connection cables. · If smoke, an abnormal noise, or a strange odor is present, immediately turn the device off and call your dealer or ViewSonic®. It is dangerous to continue using the device. · Do not attempt to circumvent the safety provisions of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade and the third prong are provided for your safety. If the plug does not fit into your outlet, obtain an adapter and do not attempt to force the plug into the outlet. · When connecting to a power outlet, DO NOT remove the grounding prong. Please ensure grounding prongs are NEVER REMOVED. · Protect the power cord from being treaded upon or pinched, particularly at the plug, and at the point where it emerges from the equipment. Ensure that the power outlet is located near the equipment so that it is easily accessible. · Only use attachments/accessories specified by the manufacturer. · When a cart is used, use with caution when moving the cart/equipment combination to avoid injury from tipping over. · Disconnect the power plug from the AC outlet if the device is not being used for a long period of time.
3

· Place the device in a well-ventilated area. · Do not cover the surface of the display with any material. · Do not block the air circulation around the display. · Keep flammable materials away from the display. · Refer all servicing to qualified service personnel. Service will be
required when the unit has been damaged in any way, such as: if the power supply cord or plug is damaged; if liquid is spilled onto or objects fall in the unit; if the unit is exposed to moisture; if the unit does not operate normally or has been dropped.
· Do not assemble the display by yourself. · This panel is an advanced product that contains millions of pixels. You may
occasionally see pixel spots when viewing the screen. Since these deactivated pixels are not a defect, the performance and reliability of the product is not affected. For more information, please see page 136.
4

Contents
Safety Precautions....................................................... 3 Introduction ................................................................ 9
Package Contents ...................................................................................................9 Product Overview .................................................................................................11
Front Panel ............................................................................................................ 11 Rear Panel ............................................................................................................. 11 I/O Ports ................................................................................................................ 12 Control Panel......................................................................................................... 13 Remote Control ..................................................................................................... 14
Installation ................................................................ 17
Before Installing....................................................................................................17 Wall Mounting......................................................................................................17 Installing the Cabinets ..........................................................................................19 Connecting the System Control Box .....................................................................22 Installing the LED Modules ...................................................................................25 Installing System Control Box Covers ...................................................................26 Floor Stand Installation.........................................................................................28
Component List ..................................................................................................... 28 Dimensions............................................................................................................ 29 Constructing the Floor Stand ................................................................................ 30 Connecting the System Control Box to the Floor Base.......................................... 32 Installing the Middle Cabinets............................................................................... 33 Installing the Left and Right Cabinet ..................................................................... 36 Connect the Network and Power Cables .............................................................. 37 Installing the LED Modules.................................................................................... 38 Installing System Control Box Covers .................................................................... 39 Detachable System Control Box ...........................................................................41 Wall Mounting....................................................................................................... 41 Installing the Cabinets........................................................................................... 44 Connecting the System Control Box (Hidden Installation) .................................... 47 Installing the LED Modules.................................................................................... 49
5

Dual-Screen Splicing .............................................................................................50 Wall Mounting....................................................................................................... 51 Installing the Cabinets........................................................................................... 53 Connecting the System Control Box (Standard Installation) ................................. 56 Connecting the System Control Box (Hidden Installation) .................................... 60 Installing the LED Modules.................................................................................... 63
Portrait Mode .......................................................................................................65 Wall Mounting....................................................................................................... 66 Installing the Cabinets........................................................................................... 67 Connecting the System Control Box (Standard Installation) ................................. 72 Connecting the System Control Box (Hidden Installation) .................................... 76 Installing the LED Modules.................................................................................... 78
Making Connections.................................................. 80
Connecting to External Devices ............................................................................80 HDMI IN Connection ............................................................................................. 80 Audio Connection.................................................................................................. 80 HDbaseT Connection............................................................................................. 80 Video Output Connection ..................................................................................... 81 USB and Networking Connections ........................................................................ 81 RS-232 Connection ................................................................................................ 82
6

Using Your Display..................................................... 83
Powering On/Off your LED Display.......................................................................83 Home Screen ........................................................................................................84 Navigating the Home Screen ................................................................................85
Remote Control ..................................................................................................... 85 Keyboard and Mouse ............................................................................................ 85 APP Center............................................................................................................86 Input Source .........................................................................................................87 Settings .................................................................................................................88 Settings Menu Tree ............................................................................................... 89 Network & Internet............................................................................................... 94 Connected Devices................................................................................................ 96 Apps ...................................................................................................................... 97 Display ................................................................................................................... 99 Sound .................................................................................................................. 103 Storage ................................................................................................................ 104 System................................................................................................................. 105 Upgrade............................................................................................................... 109 On-Screen Display (OSD) Menu..........................................................................110 On-Screen Display (OSD) Menu Tree .................................................................. 111 Menu Options ..................................................................................................... 113
Color Mode ........................................................................................113 Display Mode .....................................................................................114 Advanced Mode .................................................................................120 Speaker ..............................................................................................122 PIP/PBP Mode....................................................................................124 Information ........................................................................................127
Embedded Applications........................................... 128
ViewBoard Cast ..................................................................................................128 Browser ..............................................................................................................132 vSweeper ............................................................................................................133 WPS Office..........................................................................................................134
7

Appendix................................................................. 135
Specifications......................................................................................................135 LED Display Stuck Pixel Definition ......................................................................136 Timing Chart .......................................................................................................137
HDMI (PC)............................................................................................................ 137 HDMI (Video)....................................................................................................... 138 Supported Media Formats..................................................................................139 Troubleshooting .................................................................................................141 Maintenance.......................................................................................................143 General Precautions............................................................................................ 143 Initial Operation .................................................................................................. 143 Front Panel Cleaning Instructions ....................................................................... 143 Cabinet Cleaning Instructions ............................................................................. 143 Regular Use ......................................................................................................... 144 Vacuum Suction Tool........................................................................................... 145 LED Module Disassembly .................................................................................... 147
RS-232 Protocol....................................................... 149
RS-232 Hardware Specification ........................................................................... 149 RS-232 Communication Setting........................................................................... 149 Command Table .................................................................................................. 150
Regulatory and Service Information ........................ 151
Compliance Information.....................................................................................151 FCC Compliance Statement................................................................................. 151 IC Warning Statement ......................................................................................... 152 Country Code Statement..................................................................................... 152 IC Radiation Exposure Statement........................................................................ 153 CE Conformity for European Countries ............................................................... 153 Declaration of RoHS2 Compliance....................................................................... 154 European Union Regulatory Conformance ......................................................... 154 Indian Restriction of Hazardous Substances ....................................................... 155 Product Disposal at End of Product Life .............................................................. 155
Copyright Information ........................................................................................156 Customer Service ................................................................................................ 157 Limited Warranty ................................................................................................ 158 Mexico Limited Warranty.................................................................................... 161
8

Introduction
Package Contents
Item

Cabinet Sections
System Control Box
(Left and Right sides)
Quick Start Guide

LDP135-151
All-in-one Direct View LED Display
Quick Start Guide Guide de démarrage rapide
Schnellstartanleitung
Guía rápida de inicio Hizli Balangiç Kilavuzu Aan de slag

Quantity
5 sections total

Note
One (1) Left, three (3) Middle, and one (1) Right.

2 sides

LED Modules
Remote Control
Screws
Hex Tool (Allen wrench) System
Control Box Covers (Left, Middle,
and Right sides)

Power

Source

HDMI 1 HDMI 2

Blank

4 3 2
1

100 modules

The quantity of spare LED modules will vary by country.

20 x M6x10mm (1) 32 x M6x50mm Expansion (2)
32 x TA6x30mm (3) 12 x KM3x6mm (4)

1 x 5 mm 1 x 8 mm

Wall Mounting Brackets
Vacuum Suction
Tool

Item

Quantity
4
1

Note

Anti-Static Gloves

2 pairs

LAN Cable (5m)
IR Extender Cable (3m)
Bag with LEDs

1 bag (1,000 pieces)

Replacement LED beads specific to module batch
number.
Cannot be used on different LED module batch(es).

NOTE: · This product is packed in an air transport box. · Due to the size and weight, it is recommended that two or more people handle it. · The base stand is an optional accessory and will be sold separately.

Product Overview
Front Panel

POWER
Power Switch Speaker
Rear Panel

HDMI OUT

AUDIO AUDIO

OUT

S/PDIF OUT

IR IN

USB 5V/1.5A

LAN

HDMI 1 (2.0)

HDMI 2 (2.0)

HDMI 3 (1.4)

HDMI 4 (1.4)

HDMI 5 (2.1)

RS232

USB C

USB A

Speaker I/O & Control Panel

I/O Ports

HDMI OUT

AUDIO AUDIO

OUT

S/PDIF OUT

1 23 4

IR IN

USB 5V/1.5A

LAN

HDMI 1 (2.0)
8

HDMI 2 (2.0)
8

HDMI 3 (1.4)
9

HDMI 4 (1.4)

HDMI 5 (2.1)

9 10

RS232
11

Number Item Port

Description

HDMI OUT Extend content out to another display device.

Audio OUT Audio output to an external speaker.

Audio IN Audio input from an external device.

S/PDIF Out Multichannel sound via optical signals.

IR IN Extend the IR Receiver.

USB 2.0 USB Reader (5V/1.5A).

LAN

Standard RJ45 (10M/100M/1000M) Internet connection interface.

HDMI IN High definition input: PIP/PBP ,connect to PC with

2.0

HDMI output, set-top box, or other video device.

HDMI IN High definition input: PIP/PBP ,connect to PC with

1.4

HDMI output, set-top box, or other video device.

HDMI IN High definition input: connect to PC with HDMI

2.1

output, set-top box, or other video device.

RS-232 Serial control port.

Control Panel

Number 1
2 3 4 5
6

USB C

USB A

1 2 3 4 567 8

Item

Description

USB C USB-C Reader (5V/2A)

USB 2.0 USB Reader (5V/1.5A) IR Receiver Receiver for the Remote Control. Brightness Press to cycle through brightness levels. Volume + Increase the volume.

Volume - Decrease the volume.

Input Select Press to cycle through available input sources.

Stand-by Press to enter Stand-by mode.

Locking the Control Panel
When the administrator does not want others to use the control panel, it can be locked by pressing 1168+OK on the remote control.

Remote Control

12 13

Number Icon
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Item
Power

Description
Power On/Off

Home

Back to Home Screen

Source

Input source selection

HDMI 1/2

Change to HDMI 1/2 input source

Blank

Switch to a blank, black screen

Brightness p/q/t/u
OK

Adjust the brightness level Directional buttons Confirm the selection

Enter the Information page

Enter the Settings menu

Return

Return to previous

Play/Pause

Play/Pause content

Forwards/Backwards Move content forwards/backwards

Volume Up/Down Numbers .

Increase/decrease the volume level Numeric input buttons Input key for a dot

Backspace/Clear Delete key for text input

Mute
14

Mute/Unmute

Inserting Remote Control Batteries The remote control is powered by two 1.5V "AAA" batteries. To insert batteries into the remote control: 1. Remove the cover on the rear of the remote control. 2. Insert two "AAA" batteries, ensuring the "+" symbol on the battery matches the
"+" on the battery post. 3. Replace the cover by aligning it with the slot on the remote control and snapping
the latch shut. WARNING:There is a risk of explosion if batteries are installed with incorrect
polarity.
NOTE: · It is recommended that you do not mix battery types. · Avoid exposure to heat or steam. · Do not allow water or other liquids to splash on the remote control. If the remote control becomes wet, wipe it dry immediately. · Always dispose of old batteries in an environmentally friendly way. Contact your local government for more information on how to dispose of batteries safely.
Locking the Remote Control When the administrator does not want others to control the remote control, it can be locked by pressing 1169+OK on the remote control.
15

Remote Control Receiver Range
The operating range of the remote control is shown here. It has an effective range of 20 feet (6 meters), 30° degrees left and right. Ensure there is nothing obstructing the remote control's signal to the receiver.

POWER

HDMI OUT

AUDIO AUDIO

OUT

S/PDIF OUT

IR IN

USB 5V/1.5A

LAN

HDMI 1 (2.0)

HDMI 2 (2.0)

HDMI 3 (1.4)

HDMI 4 (1.4)

HDMI 5 (2.1)

RS232

USB C

USB A

30° 30° 20 ft

Installation

Before Installing
Maintain an adequate air gap between the back of the display and any wall for
proper ventilation. Ensure there is no direct airflow from air conditioning or heating vents blowing on the display.

Avoid installing the display in places with high humidity.

Due to high power usage, always use power cords specifically designed for this product.

Wall Mounting

Installing the Upper and Lower Wall Mount Brackets

1422.4 mm 56 in
1320.8 mm 52 in
1117.6 mm 44 in
914.4 mm 36 mm
711.2 mm 28 in
508 mm 20 in
304.8 mm 12 in
101.6 mm 4 in

7 mm / in

50.8 mm 2 in

15 mm ¹/ in

25.4 mm 1 in

50.8 mm 2 in

1. Ensure the wall area and size is an appropriate installation site.
NOTE:The height of the Upper Wall Mount Brackets must not be less than 90 ³/" (2300 mm) from the ground.

2. Using the Wall Mount Bracket (pictured above) as a guide, mark at least eight (8) holes and pre-drill them.

3. Install the first Upper Wall Mount Bracket with the provided screws (M6x50mm Expansion for masonry; TA6x30mm for load bearing wood).

4. Repeat Step 2, ensuring the second Upper Wall Mount Bracket is level with the first upper bracket. Keep a 3 ¹¹/" (85 mm) space between the two brackets.

5. Install the Lower Wall Mount Brackets in the same manner as the Upper Wall Mount Brackets. The distance between the Upper and Lower Wall Mount Brackets is 53 /" (1350 mm).

102 mm
4 ¹/ in

57 mm
2 ¹/ in
25 mm
³/ in

NOTE:You can also install the Upper Wall

1350 mm

53 / in

Mount Brackets, hang the screen, and

then install the Lower Wall Mount

l
Display

Brackets for a more precise fit.

Ensure the wall can safely support 297.62 lbs. (135 kg). Ensure the deviation of the wall surface is < ¹³/" (< 5mm).
6. After installing both Upper and Lower Wall Mount Brackets, the installation wall should look like:

Installing the Cabinets
1. Ensure the Mounting Brackets on the rear of the five (5) Middle Cabinets are positioned at the top and bottom mounting positions as shown below:
2. Carefully lift each Cabinet up onto the Upper Wall Mount Brackets, starting from the left.

3. Ensure the Mounting Brackets sit securely on the Wall Mount Brackets as shown below.
Display

Wall

4. Push each Locking Bolt and lock each Hook with the hex tool to securely connect each cabinet together. It may be necessary to align the hole with an Allen wrench in order to engage the Locking Bolt.
Push the Locking Bolt. Lock each Hook with the hex tool.
NOTE:There are five (5) Locking Bolts and 10 Hooks between each cabinet.
20

5. Place the remaining Cabinets up onto the Upper Wall Mount Brackets. Install from left to right, ensuring the Mounting Brackets sit securely on the Wall Mount Brackets.
6. Repeat Step 4, securing the cabinets together with each Locking Bolt and Hook.
Push the Locking Bolt. Lock each Hook with the hex tool.
NOTE:There are five (5) Locking Bolts and 10 Hooks between each cabinet.
21

Connecting the System Control Box
1. Carefully unfold the System Control Box panel. Ensure the main system control board is on the right. NOTE:Use caution as the System Control Box panel is separated into two pieces with wires attached.
2. Align the holes of the Cabinet with the System Control Box to attach.
22

3. You can also reroute the power cable for cable management. Loosen the two (2) PWM 4x6mm screws, pull the power cable out, thread the power cable through the hole and then fasten the screws tightly.
Hole for cable management Two (2) PWM 4x6mm Screws
Professional installation only.
23

4. Further secure the System Control Box to the Cabinets with the 20 provided M6x10mm screws.

5. Connect the Network and Power cables of the Cabinets to the System Control Box.

NOTE:There are five (5) Network and five (5) Power cables to connect.

Network 1

Network 2

Network 3

Network 4
Power

Network 5

Installing the LED Modules
1. Install each LED Module onto the Cabinets, being sure to match the corresponding numbers on the Module to the Cabinet. Please wear Anti-Static Gloves before handling the LED modules.
2. Ensure each Module is flush and that there is little to no gap between each. It may be necessary to gently tap the module to make it flush.
25

Installing System Control Box Covers
There are three (3) System Control Box Covers: Left, Middle, and Right.

POWER

HDMI OUT

AUDIO AUDIO

OUT

S/PDIF OUT

IR IN

USB 5V/1.5A

LAN

HDMI 1 (2.0)

HDMI 2 (2.0)

HDMI 3 (1.4)

HDMI 4 (1.4)

HDMI 5 (2.1)

RS232

USB C

USB A

1. Begin by installing the Right Cover onto the System Control Box.
NOTE:Ensure the Power Button cable is connected to the System Control Box Power cable before securing the Cover.
2. After connecting the Power Button cable, ensure the Right Cover is properly aligned with the System Control Box; then secure it with the 12 provided KM3x6mm screws.

HDMI OUT

AUDIO AUDIO

OUT

S/PDIF OUT

IR IN

USB 5V/1.5A

LAN

HDMI 1 (2.0)

HDMI 2 (2.0)

HDMI 3 (1.4)

HDMI 4 (1.4)

HDMI 5 (2.1)

RS232

USB C

USB A

3. Repeat the above steps for the Middle and Left Cover.

POWER
4. Your display is now ready to power on.

HDMI OUT

AUDIO AUDIO

OUT

S/PDIF OUT

IR IN

USB 5V/1.5A

LAN

HDMI 1 (2.0)

HDMI 2 (2.0)

HDMI 3 (1.4)

HDMI 4 (1.4)

HDMI 5 (2.1)

RS232

USB C

USB A

POWER

HDMI OUT

AUDIO AUDIO

OUT

S/PDIF OUT

IR IN

USB 5V/1.5A

LAN

HDMI 1 (2.0)

HDMI 2 (2.0)

HDMI 3 (1.4)

HDMI 4 (1.4)

HDMI 5 (2.1)

RS232

USB C

USB A

NOTE:We also offer a variety of installation options for different scenarios: Floor Stand, Portrait Mode, Detachable Control Box, and Dual-Screen Splicing (32:9).

Floor Stand Installation
The floor stand is an optional accessory. Follow the below instructions to install your LED Display onto the stand.

Component List

Letter

Item

Quantity

Description

Hex Tool

M6 x 80mm Bolt

Left Support

Bottom Cross Beam

Right Support

Top Cross Beam

Dimensions
665 mm 26 ³/ in
71 mm 2 ¹/ in 46 mm 1 ¹³/ in
2379.8 mm 93 ¹¹/ in
572.5 mm 22 ³/ in 807.2 mm 31 ²/ in

2328 mm 91 ²¹/ in

3010 mm 118 ¹/ in
1830.1 mm 72 ³/ in 3010 mm 118 ¹/ in

25 mm ³/ in
1807.3 mm 71 / in 2461.8 mm 96 / in
665 mm 26 ³/ in

Constructing the Floor Stand 1. Connect the Left Support to the Bottom Cross Beam with two (2) M6 x 80mm
bolts.
D B A
C
2. Connect the Right Support with the Bottom Cross Beam with two (2) M6 x 80mm bolts.
E
30

3. Connect the Top Cross Beam to the Left and Right Supports with four (4) M6 x 80mm bolts. NOTE:Ensure the groove of the Top Cross Beam faces inwards.
F
4. Ensure all bolts are tightened properly.
31

Connecting the System Control Box to the Floor Base 1. Carefully unfold the System Control Box panel. Ensure the main system control
board is on the right. NOTE:Use caution as the System Control Box panel will be separated into two
pieces, however the wires are connected. 2. Align the System Control Box to the eight (8) holes on the Bottom Cross Beam and
secure it with eight (8) screws (M6x10mm).
3. Install two (2) additional screws (M6x10mm) to connect the two halves of the System Control Box.
32

Installing the Middle Cabinets 1. Ensure the three (3) Mounting Brackets on the rear of the three (3) Middle
Cabinets are positioned as shown below:
2. Carefully lift a Cabinet up onto the Floor Stand, securing the Mounting Bracket into the support channel of the Top Cross Beam. The bottom of the Cabinet will rest on the Bottom Cross Beam.
33

3. Secure the Cabinet to the Support with the provided screws (M6x10mm).
4. Push each Locking Bolt and lock each Hook with the hex tool to securely connect each cabinet together.
Push the Locking Bolt.
Lock each Hook with the hex tool.
NOTE:There are five (5) Locking Bolts and 10 Hooks between each cabinet. 34

5. Repeat Steps 2~4 for the remaining Middle Cabinets. 35

Installing the Left and Right Cabinet 1. Carefully lift the Left and Right Cabinet up onto the Floor Stand, securing the
Mounting Bracket into the support channel of the Top Cross Beam. The bottom of the Cabinet will rest on the Bottom Cross Beam. NOTE:Ensure the holes of the Cabinet and the System Control Box are aligned. 2. Push each Locking Bolt and lock each Hook with the hex tool to securely connect the Left and Right Cabinet to the Middle Cabinets.
NOTE:There are five (5) Locking Bolts and 10 Hooks between each cabinet. 36

Connect the Network and Power Cables Connect the Network and Power cables of each Cabinet to the System Control Box.
NOTE:There are five (5) Network and five (5) Power cables to connect.

Network 1

Network 2

Network 3

Network 4
Power

Network 5

Installing the LED Modules Install each LED Module onto the Cabinets, being sure to match the corresponding numbers on the Module to the Cabinet. Ensure each Module is flush and that there is little to no gap between each. it may be necessary to gently tap the Module to make it flush.
Please wear Anti-Static Gloves before handling the LED modules.
38

Installing System Control Box Covers There are three (3) System Control Box Covers: Left, Middle, and Right.

RS232

USB

HDMI

AUDIO

USB-B

LAN

OUT

STAND-BY INPUT BRIGHTNESS

HDMI OUT

AUDIO AUDIO

OUT

S/PDIF OUT

IR IN

USB 5V/1.5A

LAN

HDMI 1 (2.0)

HDMI 2 (2.0)

HDMI 3 (1.4)

HDMI 4 (1.4)

HDMI 5 (2.1)

RS232

USB C

USB A

3. Repeat the above steps for the Middle and Left Cover. Once all of the Covers are secured, your LED Display is ready to use.

POWER

HDMI OUT

AUDIO AUDIO

OUT

S/PDIF OUT

IR IN

USB 5V/1.5A

LAN

HDMI 1 (2.0)

HDMI 2 (2.0)

HDMI 3 (1.4)

HDMI 4 (1.4)

HDMI 5 (2.1)

RS232

USB C

USB A

Detachable System Control Box
The System Control Box can be installed under the Cabinets (standard installation) for front access, or behind the Cabinets.

POWER

HDMI OUT

AUDIO AUDIO

OUT

S/PDIF OUT

IR IN

USB 5V/1.5A

LAN

HDMI 1 (2.0)

HDMI 2 (2.0)

HDMI 3 (1.4)

HDMI 4 (1.4)

HDMI 5 (2.1)

RS232

USB C

USB A

Standard Installation

Hidden System Control Box Installation

NOTE: · Standard Installation video.
· Follow the below guide to install the display with the Hidden System Control Box layout.

Wall Mounting

Installing the Upper and Lower Wall Mount Brackets

1422.4 mm 56 in
1320.8 mm 52 in
1117.6 mm 44 in
914.4 mm 36 mm
711.2 mm 28 in
508 mm 20 in
304.8 mm 12 in
101.6 mm 4 in

7 mm / in

50.8 mm 2 in

15 mm ¹/ in

25.4 mm 1 in

50.8 mm 2 in

1. Ensure the wall area and size is an appropriate installation site.
NOTE:The height of the Upper Wall Mount Brackets must not be less than 90 ³/" (2300 mm) from the ground.

2. Using the Wall Mount Bracket (pictured above) as a guide, mark at least eight (8) holes and pre-drill them.
3. Install the first Upper Wall Mount Bracket with the provided screws (M6x50mm Expansion for masonry; TA6x30mm for load bearing wood).

4. Repeat Step 2, ensuring the second Upper Wall Mount Bracket is level with the first upper bracket. Keep a 3 ¹¹/" (85 mm) space between the two brackets.

5. Install the Lower Wall Mount Brackets in the same manner as the Upper Wall Mount Brackets. The distance between the Upper and Lower Wall Mount Brackets is 53 /" (1350 mm).

57 mm
2 ¹/ in

102 mm
4 ¹/ in

25 mm
³/ in

NOTE:You can also install the Upper Wall

1350 mm

53 / in

Mount Brackets, hang the screen, and

then install the Lower Wall Mount

l
Display

Brackets for a more precise fit.

Ensure the wall can safely support 297.62 lbs. (135 kg). Ensure the deviation of the wall surface is < ¹³/" (< 5 mm).

6. After installing both Upper and Lower Wall Mount Brackets, the installation wall should look like:
85 mm 3 ¹¹/ in 1350 mm 53 / in
43

Installing the Cabinets 1. Ensure the Mounting Brackets on the rear of the five (5) Middle Cabinets are
positioned at the top and bottom mounting positions as shown below:
2. Carefully lift each Cabinet up onto the Upper Wall Mount Brackets, starting from the left.

3. Ensure the Mounting Brackets sit securely on the Wall Mount Brackets as shown below.
Display

Wall

Connecting the System Control Box (Hidden Installation) 1. Carefully unfold the System Control Box panel. Ensure the main system control
board is on the right. NOTE:Use caution as the System Control Box panel is separated into two pieces
with wires attached. 2. Install the left part of System Control Box using the M6x16mm screws behind the
Cabinet.
3. Install the right part of the System Control Box using the M6x16mm screws behind the Cabinet.
47

4. Connect the Network and Power cables of the Cabinets to the System Control Box. NOTE:There are five (5) Network and five (5) Power cables to connect.
· Route the Power cable through the opening provided in the Cabinet and connect it to the power plug.
· Route the Network cable through the opening provided in the Cabinet into an "S-shape" and connect it to the network port.
5. Install the bezels from the bottom of the screen and use the M6x10mm screws to secure it to the Cabinet.
48

Installing the LED Modules 1. Install each LED Module onto the Cabinets, being sure to match the
corresponding numbers on the Module to the Cabinet. Please wear Anti-Static Gloves before handling the LED modules.
2. Ensure each Module is flush and that there is little to no gap between each. It may be necessary to gently tap the module to make it flush.
49

Dual-Screen Splicing
Two (2) DirectView LED Displays can be installed together to create one (1) large display.

POWER

HDMI OUT

AUDIO AUDIO

OUT

S/PDIF OUT

IR IN

USB 5V/1.5A

LAN

HDMI 1 (2.0)

HDMI 2 (2.0)

HDMI 3 (1.4)

HDMI 4 (1.4)

HDMI 5 (2.1)

RS232

USB C

USB A

POWER

HDMI OUT

AUDIO AUDIO

OUT

S/PDIF OUT

IR IN

USB 5V/1.5A

LAN

HDMI 1 (2.0)

HDMI 2 (2.0)

HDMI 3 (1.4)

HDMI 4 (1.4)

HDMI 5 (2.1)

RS232

USB C

USB A

Standard Installation

Hidden System Control Box Installation
NOTE:The System Control Boxes can be installed under the Cabinets (standard installation) for front access, or behind the Cabinets.

Wall Mounting

Installing the Upper and Lower Wall Mount Brackets

1422.4 mm 56 in
1320.8 mm 52 in
1117.6 mm 44 in
914.4 mm 36 mm
711.2 mm 28 in
508 mm 20 in
304.8 mm 12 in
101.6 mm 4 in

7 mm / in

50.8 mm 2 in

15 mm ¹/ in

25.4 mm 1 in

50.8 mm 2 in

1. Ensure the wall area and size is an appropriate installation site.
NOTE:The height of the Upper Wall Mount Brackets must not be less than 90 ³/" (2300 mm) from the ground.

2. Using the Wall Mount Bracket (pictured above) as a guide, mark at least eight (8) holes and pre-drill them.

3. Install the first Upper Wall Mount Bracket with the provided screws (M6x50mm Expansion for masonry; TA6x30mm for load bearing wood).

4. Repeat Step 2, ensuring the second Upper Wall Mount Bracket is level with the first upper bracket. Keep a 3 ¹/" (82.6 mm) space between the two brackets.

5. Install the Lower Wall Mount Brackets in the same manner as the Upper Wall Mount Brackets. The distance between the Upper and Lower Wall Mount Brackets is 53 /" (1350 mm).

57 mm
2 ¹/ in

102 mm
4 ¹/ in

25 mm
³/ in

NOTE:You can also install the Upper Wall

1350 mm

53 / in

Mount Brackets, hang the screen, and

then install the Lower Wall Mount

l
Display

Brackets for a more precise fit.

Ensure the wall can safely support 297.62 lbs. (135 kg). Ensure the deviation of the wall surface is < ¹³/" (< 5 mm).

6. Repeat Steps 1~5 for the second display. Keep a 2 /" (72.8 mm) space between the first and second display's Wall Mount Brackets.

7. After installing both Upper and Lower Wall Mount Brackets of both displays, the installation wall should look like:

82.6 mm 3 ¹/ in

72.8 mm 2 / in

82.6 mm 3 ¹/ in

1350 mm 53 / in

Installing the Cabinets 1. Ensure the Mounting Brackets on the rear of the five (5) Middle Cabinets are
positioned at the top and bottom mounting positions as shown below:
2. Carefully lift each Cabinet up onto the Upper Wall Mount Brackets, starting from the left.

3. Ensure the Mounting Brackets sit securely on the Wall Mount Brackets as shown below.
Display

Wall

5. Place the remaining Cabinets up onto the Upper Wall Mount Brackets. Install from left to right, ensuring the Mounting Brackets sit securely on the Wall Mount Brackets.
6. Repeat Step 4, securing the cabinets together with each Locking Bolt and Hook.
Push the Locking Bolt.
Lock each Hook with the hex tool.
NOTE:There are five (5) Locking Bolts and 10 Hooks between each cabinet. 7. Repeat Steps 1~6 for the second display. 8. After installing the Cabinets of both displays, the installation wall should look like:
55

Connecting the System Control Box (Standard Installation) 1. Carefully unfold the System Control Box panel. Ensure the main system control
board is on the right. NOTE:Use caution as the System Control Box panel is separated into two pieces
with wires attached. 2. Starting from the left side, align the holes of the Cabinet with the System Control
Box to attach.
56

4. Further secure the System Control Box to the Cabinets with the 20 provided M6x10mm screws.

5. Connect the Network and Power cables of the Cabinets to the System Control Box.

NOTE:There are five (5) Network and five (5) Power cables to connect.

Network 1

Network 2

Network 3

Network 4
Power

Network 5

6. Repeat Steps 1~5 for the second display.
7. After installing the System Control Box of both displays, the installation wall should look like:

Display 1

Display 2

8. Connect one end of an HDMI cable to the HDMI OUT port of Display 2. Then, connect the other end of the cable to the HDMI IN port of Display 1.

HDMI IN

HDMI OUT

NOTE:Route the HDMI cable as shown below:

9. Install the System Control Box Covers with the KM3x6mm screws from left to right (i.e., Display 1 left cover, Display 1 middle cover, Display 1 right cover, Display 2 left cover, etc.).
NOTE:Refer to page 26 for more information.

Connecting the System Control Box (Hidden Installation)

1. Connect one end of an HDMI cable to the HDMI OUT port of Display 2. Then,

connect the other end of the cable to the HDMI IN port of Display 1.

HDMI IN

HDMI OUT

NOTE:Route the HDMI cable as shown below:

2. Carefully unfold the System Control Box panel. Ensure the main system control board is on the right.
NOTE:Use caution as the System Control Box panel is separated into two pieces with wires attached.
3. Install the left part of System Control Box using the M6x16mm screws behind the Cabinet.

4. Install the right part of the System Control Box using the M6x16mm screws behind the Cabinet.
61

5. Connect the Network and Power cables of the Cabinets to the System Control Box. NOTE:There are five (5) Network and five (5) Power cables to connect.
· Route the Power cable through the opening provided in the Cabinet and connect it to the power plug.
· Route the Network cable through the opening provided in the Cabinet into an "S-shape" and connect it to the network port.
6. Repeat Steps 1~4 for the second display. 7. Install the bezels from the bottom of the screen and use the M6x10mm screws to
secure it to the Cabinet.
62

Installing the LED Modules 1. Starting with Display 1, install each LED Module onto the Cabinets, being sure to
match the corresponding numbers on the Module to the Cabinet. Please wear Anti-Static Gloves before handling the LED modules.
2. Ensure each Module is flush and that there is little to no gap between each. It may be necessary to gently tap the module to make it flush.
3. Once Display 1 is complete, repeat Steps 1~2 for Display 2.
63

4. After installing the LED Modules of both displays, the installation wall should look like:

POWER

HDMI OUT

AUDIO AUDIO

OUT

S/PDIF OUT

IR IN

USB 5V/1.5A

LAN

HDMI 1 (2.0)

HDMI 2 (2.0)

HDMI 3 (1.4)

HDMI 4 (1.4)

HDMI 5 (2.1)

RS232

USB C

USB A

POWER

HDMI OUT

AUDIO AUDIO

OUT

S/PDIF OUT

IR IN

USB 5V/1.5A

LAN

HDMI 1 (2.0)

HDMI 2 (2.0)

HDMI 3 (1.4)

HDMI 4 (1.4)

HDMI 5 (2.1)

RS232

USB C

USB A

Standard Installation

Hidden System Control Box Installation

Portrait Mode
The DirectView LED Display can be installed in either Landscape or Portrait orientation.

POWER

HDMI OUT

AUDIO AUDIO

OUT

S/PDIF OUT

IR IN

USB 5V/1.5A

LAN

HDMI 1 (2.0)

HDMI 2 (2.0)

HDMI 3 (1.4)

HDMI 4 (1.4)

HDMI 5 (2.1)

RS232

USB C

USB A

Landscape Installation

USB A

USB C

RS232

HDMI 5 (2.1)

HDMI 4 (1.4)

HDMI 3 (1.4)

HDMI 2 (2.0)

HDMI 1 (2.0)

LAN

USB 5V/1.5A

IR IN

S/PDIF OUT

AUDIO AUDIO

OUT

HDMI OUT

POWER

Portrait Installation
NOTE:The System Control Box can be installed under the Cabinets (standard installation) for front access, or behind the Cabinets.
65

Wall Mounting Installing the Wall Mount Brackets
1200 mm 47 ¹/ in
1200 mm 47 ¹/ in
500 mm 19 ¹¹/ in
1. Ensure the wall area and size is an appropriate installation site. 2. Using the first Wall Mount Bracket, install the top Wall Mount Bracket with the
provided screws (M6x50mm Expansion for masonry; TA6x30mm for load bearing wood). 3. Repeat Step 2, ensuring the second Wall Mount Bracket is level with the first Wall Mount Bracket. Keep a 47 ¹/" (1200 mm) space between the two brackets (as pictured above). 4. Install the remaining two Wall Mount Brackets in the same manner as the other two Wall Mount Brackets. The distance between the Wall Mount Brackets is 47 ¹/" (1200 mm) and 19 ¹¹/" (500 mm) respectively.
Ensure the wall can safely support 297.62 lbs. (135 kg). Ensure the deviation of the wall surface is < ¹³/" (< 5 mm).
66

Installing the Cabinets 1. Ensure 10 Mounting Brackets are attached to the rear of the five (5) Middle
Cabinets are positioned horizontally as shown below:
67

2. Carefully lift each Cabinet up onto the Wall Mount Brackets, starting from the bottom.

NOTE:Cabinet letter installation will differ based on the preferred System Control Box installation (left or right side).

USB A

USB C

POWER

RS232

HDMI 5 (2.1)

HDMI 4 (1.4)

HDMI 3 (1.4)

HDMI 2 (2.0)

HDMI 1 (2.0)

LAN

USB 5V/1.5A

IR IN

S/PDIF OUT

AUDIO AUDIO

OUT

HDMI OUT

A B C D E Left Side Installation

E D C B A
Right Side Installation

HDMI OUT

AUDIO AUDIO

OUT

S/PDIF OUT

IR IN

USB 5V/1.5A

LAN

HDMI 1 (2.0)

HDMI 2 (2.0)

HDMI 3 (1.4)

HDMI 4 (1.4)

HDMI 5 (2.1)

RS232

POWER

USB C

USB A

3. Ensure the Mounting Brackets sit securely on the Wall Mount Brackets as shown below.
Display

Wall

Lock each Hook with the hex tool.
NOTE:There are five (5) Locking Bolts and 10 Hooks between each cabinet. 5. Further secure the Cabinets together with M6x16mm screws.
69

6. Place the remaining Cabinets up onto the Wall Mount Brackets. Install from bottom to top, ensuring the Mounting Brackets sit securely on the Wall Mount Brackets.
7. Repeat Step 4, securing the cabinets together with each Locking Bolt and Hook.
Push the Locking Bolt.
Lock each Hook with the hex tool.
NOTE:There are five (5) Locking Bolts and 10 Hooks between each cabinet. 8. Further secure the Cabinets together with M6x16mm screws.
70

9. After installing all the Cabinets, the installation wall should look like: 71

Connecting the System Control Box (Standard Installation) 1. Carefully unfold the System Control Box panel. Ensure the main system control
board is on the right. NOTE:Use caution as the System Control Box panel is separated into two pieces
with wires attached. 2. Starting from the bottom, align the holes of the Cabinet with the System Control
Box to attach.
72

4. Further secure the System Control Box to the Cabinets with the 20 provided M6x10mm screws.
5. Connect the Network and Power cables of the Cabinets to the System Control Box. NOTE:There are five (5) Network and five (5) Power cables to connect.
Network 5 Network 4
Power
Network 3 Network 2 Network 1
74

6. After installing the System Control Box, the installation wall should look like: 7. Install the System Control Box Covers with the KM3x6mm screws.
75

Connecting the System Control Box (Hidden Installation) 1. Carefully unfold the System Control Box panel. Ensure the main system control
board is on the right. NOTE:Use caution as the System Control Box panel is separated into two pieces
with wires attached. 2. Install the left and right part of System Control Box using the M6x16mm screws
behind the Cabinet.
NOTE:The System Control Box can be installed on the left or right side behind the display.
76

3. Connect the Network and Power cables of the Cabinets to the System Control Box. NOTE:There are five (5) Network and five (5) Power cables to connect.
· Route the Power cable through the opening provided in the Cabinet and connect it to the power plug.
· Route the Network cable through the opening provided in the Cabinet into an "S-shape" and connect it to the network port.
4. Install the bezels from the bottom of the screen and use the M6x10mm screws to secure it to the Cabinet.
77

Installing the LED Modules
1. Install each LED Module onto the Cabinets from bottom left to right, being sure to match the corresponding numbers on the Module to the Cabinet.
NOTE:LED Module installation will vary depending on the location of the System Control Box.
Please wear Anti-Static Gloves before handling the LED modules.

USB A

USB C

POWER

1 11 21 31 41 51 61 71 81 91
A
2 12 22 32 42 52 62 72 82 92

100 90 80 70 60 50 40 30 20 10
E 99 89 79 69 59 49 39 29 19 9

RS232

HDMI 5 (2.1)

HDMI 4 (1.4)

HDMI 3 (1.4)

HDMI 2 (2.0)

HDMI 1 (2.0)

LAN

USB 5V/1.5A

IR IN

S/PDIF OUT

AUDIO AUDIO

OUT

HDMI OUT

3 13 23 33 43 53 63 73 83 93
B
4 14 24 34 44 54 64 74 84 94

98 88 78 68 58 48 38 28 18 8
D 97 87 77 67 57 47 37 27 17 7

5 15 25 35 45 55 65 75 85 95
C
6 16 26 36 46 56 66 76 86 96

96 86 76 66 56 46 36 26 16 6
C 95 85 75 65 55 45 35 25 15 5

HDMI OUT

AUDIO AUDIO

OUT

7 17 27 37 47 57 67 77 87 97
D
8 18 28 38 48 58 68 78 88 98

94 84 74 64 54 44 34 24 14 4
B
93 83 73 63 53 43 33 23 13 3

S/PDIF OUT

IR IN

USB 5V/1.5A

LAN

HDMI 1 (2.0)

HDMI 2 (2.0)

HDMI 3 (1.4)

HDMI 4 (1.4)

HDMI 5 (2.1)

RS232

9 19 29 39 49 59 69 79 89 99
E
10 20 30 40 50 60 70 80 90 100
Left Side Installation

92 82 72 62 52 42 32 22 12 2
A
91 81 71 61 51 41 31 21 11 1
Right Side Installation

POWER

USB C

USB A

2. Ensure each Module is flush and that there is little to no gap between each. It may be necessary to gently tap the module to make it flush.

3. After installing the LED Modules, the installation wall should look like: NOTE:The lowest Wall Mount Bracket can be removed for a cleaner installation. 79

Making Connections
Connecting to External Devices
HDMI IN Connection

Media Player Connection
Connect an HDMI cable from your external device to an HDMI IN port on the LED display.

PC Connection Connect an HDMI cable from your PC to an HDMI IN port on the LED display.

HDMI 1

HDMI 2

Blu-ray / DVD / DVR / Media Player
HDMI Out

HDMI 1

HDMI 2

HDMI Out

HDMI In

Audio Connection
Connect an audio cable from your external audio device to the Audio Out port on the LED display.

AUDIO OUT
AUDIO OUT

Audio In
AUDIO OUT
Stereo Amplifier
HDbaseT Connection Connect a CAT5e/6 cable from your external device to the HDbaseT device before installing the System Control Box Cover.

Cat5e/6 Cable

HDBaseT Switch

Video Output Connection
To output video via an external display device, connect an HDMI cable to the HDMI IN port of your external display device, and the other end to the HDMI OUT port of your LED display.

HDMI OUT

HDMI Cable

Projector

USB and Networking Connections
Just like any PC, it is easy to connect various USB devices and other peripherals to your LED display.
USB (Type A / Type C) · USB Type A Plug the USB device, cable, or storage drive into the USB Type A port.

USB Type A Cable

USB Device

· USB Type C Plug the USB device, cable, or storage drive into the USB Type C port.

USB Type C

USB Cable

USB Type C

Networking and Modem cables Plug the network cable into the LAN port.

LAN
Network Cable

Computer Internet

RS-232 Connection
When you use a RS-232 serial cable to connect your LED display to an external computer and control system certain functions can be controlled remotely such as: Power On/Off, Volume adjustment, Input select, Brightness, and more.

RS-232

Serial Port Cable

Computer

Using Your Display
Powering On/Off your LED Display
1. Ensure the power cord is connected and plugged into a power outlet. 2. Press the Power Switch to the ON position.

POWER
Power Switch

HDMI OUT

AUDIO AUDIO

OUT

S/PDIF OUT

IR IN

USB 5V/1.5A

LAN

HDMI 1 (2.0)

HDMI 2 (2.0)

HDMI 3 (1.4)

HDMI 4 (1.4)

HDMI 5 (2.1)

RS232

USB C

USB A

The Power button is located on the front of the unit.

3. Press the Power button to turn on the LED display. 4. To turn the display off, press the Power button again.

Home Screen
3

Number Item

Description

Main Menu

Access the Home Screen, APP Center, Settings, and Input Source.

Time of Day The sky will change over the day between morning, noon, Indicator afternoon, and night.

Quick Access

Quick access to LAN, Wi-Fi, Brightness, and Power. NOTE: Only supported by keyboard and mouse.

Automatic time adjustment, time zone selection, and 24-hour

format can all be adjusted on page 106.

Date & Time The Date & Time can also be hidden from the Home Screen

under:

Settings > Display > Launcher Settings

ViewSonic The logo can be hidden from the Home Screen under:

Logo

Settings > Display > Launcher Settings

Navigating the Home Screen
Remote Control
The remote control can be used to easily navigate the Home Screen. When using the remote control, ensure it is kept within the IR receiver range as shown below:

POWER

HDMI OUT

AUDIO AUDIO

OUT

S/PDIF OUT

IR IN

USB 5V/1.5A

LAN

HDMI 1 (2.0)

HDMI 2 (2.0)

HDMI 3 (1.4)

HDMI 4 (1.4)

HDMI 5 (2.1)

RS232

USB C

USB A

30° 30° 20 ft

Keyboard and Mouse When connected to the USB Type-A port of the display, a keyboard and mouse can also be used to navigate the Home Screen.
USB Type A Cable
USB Device
The mouse pointer will appear as an orange dot on the display when used:

· The left mouse button will confirm actions. · The right mouse button will go back to the previous layer. · Keyboard shortcuts and hot keys are also supported, including: audio
adjustment, mute, and back to the Home Screen.
85

APP Center
Installed applications will be in the APP Center.

Icon

Name

Browser

Description
Web browser

Display

Wirelessly mirror your desktop

EAirplay

AirPlay mirroring

EnterpriseAgent

Device management

File Manager

File explorer

Manager

Remote device management

Revel Digital Signage

Manage digital signage

SureMDM Nix WPS Office
vCastReceiver

Secure, monitor, and manage devices
Create documents, spreadsheets, and presentations
Receive casted content from devices

vSweeper

Clear up storage space

NOTE:Preloaded applications are subject to change without notice.

Input Source
The display supports eight input sources: Home, HDMI 1, HDMI 2, HDMI 3, HDMI 4, HDMI 5, HDBaseT, and USB C.
87

Settings
Adjust and view the display's settings.

Menu Network & Internet Connected Devices
Apps
Display
Sound Storage System Upgrade

Description
View and adjust Wi-Fi, Ethernet, and Potable Hotspot.
View and adjust Connected Devices.
View and adjust App Info., App Permissions, and Default Apps.
View and adjust Brightness Level, Ambient Light Sensor, Font Size, Startup & Shutdown, Input Setting, and Launcher Settings.
View and adjust Media Volume.
View and adjust Device Storage.
View and adjust Languages & Input, Date & Time, Dehumidification, Reset, and About Device.
View and adjust OTA Upgrade and Local Update.

Settings Menu Tree

Main Menu Sub-menu

Menu Option

Wi-Fi

Off

Wi-Fi List

Add Network

Wi-Fi

Open Network On

Notification

Off

Network & Internet

Wi-Fi Preference

Keep Wi-Fi on During Sleep
Advanced

Ethernet

Ethernet IP Mode

DHCP STATIC

Ethernet Details

Portable Hotspot

Portable Wi-Fi Hotspot

On Off

Connected Devices

Connected Devices
Device Name

On Off ViewSoinc DvLED

App Info.

Installed Apps

Disable Force Stop

Calendar

Apps

Location App Permissions
Microphone

Storage

Default Apps

Browser Home

Brightness Level (-/+, 1~8)

Ambient Light On

Sensor

Off

Font Size

(-/+, 1~4)

Display

Dual-Screen Splicing

Enable

On Off

Default

Startup & Shutdown

Splash Screen

ViewSonic Black

Blue

Main Menu Sub-menu
Startup & Shutdown
Display Input Setting
Launcher Settings Other Display Settings

Last Shutdown Channel
Default Startup Channel
Standby Mode Splash Screen

Menu Option
On
Off Home HDMI 1 HDMI 2 HDMI 3 HDMI 4 HDMI 5 USB C HDBaseT APP (Display) APP (vCastReceiver) Hibernate Sleep ViewSonic Black Blue

HDMI 1

Input Alias
Signal Source Detect

HDMI 2
HDMI 3 HDMI 4 HDMI 5 USB C HDBaseT Enable Disable

Display Hide Display Hide Display Hide Display Hide Display

ViewSonic Logo
Date & Time Theme Custom Resolution

On
Off On Off
Width Height

Main Menu Sub-menu

Display Sound

Other Display Settings
Boot Logo Settings Media Volume

Storage Device Storage

System

Language & Input

Timer Setting

Custom DPI
Custom Wallpaper

Menu Option
(-/+, 100~240)

(-/+, 0~100) Internal Shared Storage
Languages
Virtual Keyboard Shutdown Time

Storage Manager Photos & Videos Music & Audio Games Movie & TV English French Spanish German Russian Dutch Turkish Arabic Remote Controller Input Method Manage Keyboards
Repeat
Time

On Off
Off Once Everyday

Main Menu System

Sub-menu

Menu Option

Off

Repeat Power On Time

Once Everyday

Time

Timer Setting Sleep Timer

Off/1/10/20/30/40/50/60/90/120 minute(s)

Power Saving Standby Mode

On Off Hibernate Sleep

Automatic Date On

& Time

Off

Date & Time

Select Time Zone

Use 24-hour

Format

Off

On Settings
Off

Automatic

Reminders

Off

Dehumidification Begin

Dehumidification Now

Off

Scheduled

Off

Network Settings Reset

Reset

Reset App Preferences

Factory Data Reset

Status

Legal Information

About Device

Model Kernel Version

Build Number

Total Time

Main Menu Upgrade

Sub-menu
OTA Upgrade
Local Update

Menu Option
OTA Cloud Server sda1
SDcard

Network & Internet

Sub-menu

Description
Select Wi-Fi to enter the Wi-Fi selection interface. Then select the desired Wi-Fi network and enter the password.

Wi-Fi

You can select Add Network in the Wi-Fi selection screen to manually add a Wi-Fi network.

Sub-menu

Description
Select Wi-Fi Preferences to view Wi-Fi usage preferences, Wi-Fi connection tips, etc.

Wi-Fi

Select Ethernet to enable/disable Ethernet, review DNS, and IP mode.
Ethernet

Enable/disable Portable Wi-Fi Hotspot under Portable Hotspot.
Portable Hotspot

Connected Devices Enable/disable device connection, review connected devices, and search and connect to other devices.
96

Apps

Sub-menu

Description
Select App Info to view installed applications and their detailed information.

App Info.

You can also disable the application, review notifications and permissions, and adjust further settings.

Sub-menu

Description
Select App Permissions to manage various application permissions.

App Permissions

Select your default applications. Default Apps

Display

Sub-menu

Description
Adjust the brightness level by eight (8) levels.

Brightness Level

Ambient Light Sensor

Detects ambient light and adjusts brightness levels automatically.
Preview and adjust the font size on the display.

Font Size

Sub-menu

Description
Enable Dual-Screen Splicing if installing two (2) DirectView LED Displays together.

Dual-Screen Splicing

100

Sub-menu

Description

Startup & Shutdown

Startup Channel Last Shutdown Channel: Start in the channel that was last used before the previous shutdown.
Default Startup Channel: Select a specific startup channel (Home, HDMI 1/2/3/4/5, HDBaseT, USB C, APP(Display), APP(vCastReceiver)).
Standby Mode Hibernate: Power off the screen only.
Sleep: Power down the display to minimal power consumption (0.5W).
Splash Screen Change the boot screen to black, blue, or the ViewSonic logo.

Input Setting

Input Alias Switch Display or hide the input source. Signal Source Detect Enable or disable HDMI input detection. U Disk Detect Enable or disable U Disk input detection.
101

Sub-menu

Description

Launcher Settings

ViewSonic Logo Display or hide the ViewSoinc logo on the Home Screen.
Date & Time Display or hide the date and time on the Home Screen.
Theme Choose from seven (7) included themes for the Home Screen.

Others Display Settings

Adjust the Resolution, DPI, wallpaper and other display settings.

102

Sound

Sub-menu Media Volume

Description
Adjust the volume level of the display.

103

Storage

Sub-menu

Description

Internal Shared Storage Internal storage allocation.

104

System

Sub-menu

Description

Languages & Input
Languages Language selection. Virtual Keyboard Select your input method.

105

Sub-menu

Description

Timer Setting

Shutdown Time Repeat Select the time and frequency for shutting down the display.
Power ON Time Repeat Select the time and frequency for powering ON the display.
Sleep Timer Set the amount of time before entering sleep mode.
Power Saving Select when to enable power saving mode.
Standby Mode Choose between Hibernate and Sleep modes.

Date & Time

Automatic Date & Time Enable or disable automatic time adjustment.
Select Time Zone Choose your appropriate time zone.
Use 24-hour Format Enable or disable 24-hour time format.

106

Sub-menu

Description
Start and adjust dehumidification settings.

Dehumidification

Reset

Network Settings Reset Reset current network settings. Reset App Preferences Reset current app preferences. Factory Data Reset Restore the display to default factory settings.
107

Sub-menu

Description
View information about the display.

About Device

108

Upgrade

Sub-menu

Description

OTA Upgrade

Auto Update Automatically apply updates as they become available or schedule the default update date and choose "Hibernate" as the Standby Mode, and the system will automatically update the schedule after shutdown.
Manual Update Check Update: The system will check for the latest FW automatically. If a new FW version is found, confirm the new FW is needed and then manually run the update.
Local Update: Plug in a USB drive with the FW update in .zip format and run the .zip file to update the FW.

109

On-Screen Display (OSD) Menu
Use the On-Screen Display (OSD) Menu to adjust settings. NOTE:The OSD Menu is only available when there is an active input source, e.g. HDMI.
To open and operate the OSD Menu: 1. Press the MENU button on the remote control. 2. Press q/p/t/u on the remote control to select menu items or adjust values. 3. Press OK to confirm your selection. 4. Press the RETURN button to go back to the previous menu level. 5. Press the MENU button to exit the OSD Menu.
110

On-Screen Display (OSD) Menu Tree

Main Menu Color Mode

Sub-menu
User TV Movie Presentation

Aspect Ratio

Display Mode

Brightness Contrast Tint Saturation Sharpness
Gamma

Advanced Mode

Color Temp Reset HDR EOTF
HDMI Setting

Menu Option
Auto 4:3 16:9 Native (-/+, 0~100) (-/+, 0~100) (-/+, -50~50) (-/+, 0~100) (-/+, 0~20) Dark Middle Bright User Standard Cool Warm
Auto SDR Dark Middle Bright Auto Full Limited

111

Main Menu

Sub-menu

Audio Mode

Speaker
PIP/PBP Mode Information

EQ_120Hz EQ_500Hz EQ_1.5KHz EQ_5KHz EQ_10KHz Reset Audio Volume Mute Off
PIP
PBP
Source Resolution HDR

Menu Option
User Standard Vivid Sports Movie Music News Auto (-/+, 0~100) (-/+, 0~100) (-/+, 0~100) (-/+, 0~100) (-/+, 0~100)
(-/+, -50~50) On Off
Sub Picture on Top Left Sub Picture on Top Right Sub Picture on Bottom Left Sub Picture on Bottom Right Windows x 2 Windows x 3 Windows x 4

112

Menu Options Color Mode

1. Press MENU on the remote control to display the OSD Menu. 2. Then press OK or use q/p/t/u on the remote control to select the Color Mode
menu.
3. Press q/p to select the menu option. Then press OK to display its sub-menu, or press t/u to adjust/select the setting.
NOTE:Some sub-menu options may have another sub-menu layer.

Menu Option

Description

Color Mode

User Custom user setting.
TV Set the color temperature to 9300K.
Movie Set the color temperature to 6500K.
Presentation Set the color temperature to 7500K.

113

Display Mode 1. Press MENU on the remote control to display the OSD Menu. 2. Then press OK or use q/p/t/u on the remote control to select the Display
Mode menu. 3. Press q/p to select the menu option. Then press OK to display its sub-menu, or
press t/u to adjust/select the setting. NOTE:Some sub-menu options may have another sub-menu layer.
114

Menu Option

Description
The Aspect Ratio is the ratio of the image width to the image height.

Aspect Ratio
Auto Scales an image proportionally to fit the projector's native resolution in its horizontal width. This is suitable for the incoming image which is neither 4:3 nor 16:9 and you want to make the most use of the screen without altering the image's aspect ratio. 4:3 Scales an image so that it is displayed in the center of the screen with a 4:3 aspect ratio. This is most suitable for 4:3 images like computer monitors, standard definition TV, and 4:3 aspect DVD movies, as it displays them without aspect alteration.
115

Menu Option Aspect Ratio
Brightness Contrast
Tint Saturation Sharpness

Description
16:9 Scales an image so that it is displayed in the center of the screen with a 16:9 aspect ratio. This is most suitable for images which are already in a 16:9 aspect, like high definition TV.
Native Default aspect ratio.
The higher the value, the brighter the image. Lower values will result in a darker image.
Use this to set the peak white level after you have previously adjusted the Brightness setting to suit your selected input and viewing environment.
The higher the value, the more greenish the picture becomes. The lower the value, the more reddish the picture becomes.
Refers to the amount of that color in a video picture. Lower settings produce less saturated colors; in fact, a setting of "0" removes that color from the image entirely. If the saturation is too high, that color will be overpowering and unrealistic.
A high value results in a sharper picture; a low value softens the picture.

116

Menu Option

Description
Manually adjust the brightness level of the monitor's grayscale levels.

Gamma

117

Menu Option

Description

Manually adjust the red, green, and blue values.

Color Temp

118

Menu Option

Description

Return the Display Mode settings to their default values.

Reset

119

Advanced Mode

1. Press MENU on the remote control to display the OSD Menu. 2. Then press OK or use q/p/t/u on the remote control to select the Advanced
Mode menu.
3. Press q/p to select the menu option. Then press OK to display its sub-menu, or press t/u to adjust/select the setting.
NOTE:Some sub-menu options may have another sub-menu layer.

Menu Option

Description

HDR
SDR Enable Standard Dynamic Range. Auto Automatically adjust to the input source.
120

Menu Option

Description
Automatically adjusts the brightness levels of your image according to the input source. You can also manually select a brightness level to display better picture quality.

EOTF

HDMI Setting Auto Sets the display to detect the range of the input signal automatically. Full Sets the color range from 0~255. Limited Sets the color range from 15~255.
121

Speaker

1. Press MENU on the remote control to display the OSD Menu. 2. Then press OK or use q/p/t/u on the remote control to select the Speaker
menu.
3. Press q/p to select the menu option. Then press OK to display its sub-menu, or press t/u to adjust/select the setting.
NOTE:Some sub-menu options may have another sub-menu layer.

Menu Option

Description

Audio Mode
Music Vibrant treble and stronger bass. Movie Enhance the sense of space. User Customize the audio equalizer.

122

Menu Option

Description

Return the Speaker settings to their default values.

Reset

Audio Volume Adjust the volume level. Toggle On to turn off the speaker.
Mute

123

PIP/PBP Mode

1. Press MENU on the remote control to display the OSD Menu. 2. Then press OK or use q/p/t/u on the remote control to select the PIP/PBP
Mode menu.
3. Press q/p to select the menu option. Then press OK to display its sub-menu, or press t/u to adjust/select the setting.
NOTE:Some sub-menu options may have another sub-menu layer.

Menu Option

Description

PIP/PBP Setup
Off Disable the PIP/PBP feature.

124

Menu Option

Description
PIP Split the screen into two parts, a main window and an inset window. User can specify the input source for each screen.

PIP/PBP Setup

125

Menu Option

Description
PBP Display up to four (4) windows on screen at the same time.

PIP/PBP Setup

126

Information

1. Press MENU on the remote control to display the OSD Menu. 2. Then press OK or use q/p/t/u on the remote control to select the Information
menu.
3. Press q/p to select the menu option. Then press OK to display its sub-menu.

Menu Option

Description

View Input Source, Resolution, and HDR information.

Information

127

Embedded Applications
ViewBoard Cast
Working with ViewBoard® Cast software, the vCastReceiver app, will allow the LED display to receive vCastSender screen sharing (Windows/Mac/Chrome) and mobile (iOS/Android) users' screens, photos, videos, annotations, and camera(s).
Network Information · ViewBoard® Cast software, laptops, and mobile devices can be connected to the
same subnet and across the subnet as long as it can communicate between the two. · Connected devices will show up under "Device List" on the same subnet connection. · If the device does not show up under "Device List", users will need to key-in the on-screen PIN-code.
ViewBoard Cast is a wireless peer to peer data communication, therefore the following port settings are required: Ports: · CP: 56789, 25123, 8121, and 8000 · UDP: 48689 and 25123 Port and DNS activation: · Port: 8001 · DNS: h1.ee-share.com
128

Cast Sender from Windows-based Devices, Macbook, and Chrome devices.
Mac, Windows, Chrome Devices: 1. Make sure your device is connected to the same network as the display. 2. Open a web browser and enter the address that is shown on the display to
download the application. 3. Launch the application and click the connect icon next to the Device Name.
NOTE:If the device is not listed, click Connect with PIN-Code and input the pincode displayed on the display. 129

Cast Sender from Mobile Devices: iOS-based (iPhone, iPad) and Android OS based phone/tablet.
Android/iOS: 1. Make sure your device is connected to the same network as the display. 2. Scan the QR Code that is shown on the display to download the client application
directly from the server, or download from the Google Play Store or the Apple Store. 3. Launch the application and select the correct Device Name and input the pin to connect. You can also directly input the pin-code displayed on the display to connect. Apple AirPlay®: 1. Make sure your device is connected to the same network as the display. 2. Directly open AirPlay and select the Device Name to connect. 3. Another "AirPlay Password" will be generated on-screen for the connection.
130

Cast Out from a Mobile Device that Supports Annotation

Item
Toggle

Description
Hide or display the toolbar.

Home Return to the Home interface.

Return Return to the previous operation interface.

Folder
Screen sharing

View or open the mobile device's internal file.
Share the screen. NOTE: Android 5.0 and above supported.

Touch Change to touch mode.

Pen Make annotations, and change the color and thickness. Clear Clear everything on the screen. Camera Use the camera and send the image to the ViewBoard.

131

Browser
Web browser for surfing the Internet.
132

vSweeper
Remove unnecessary data and unwanted files. Advanced Settings can also be customized to the user's needs.
133

WPS Office
Create, edit, and view Documents, Memos, Presentations, and Spreadsheets.
134

Appendix

Specifications

Item
Model
LED Screen
Input Signal
Output Signal Speaker Output
RS-232 Power Operating Conditions Storage Conditions Physical Dimensions (W x H x D) Weight Power Consumption

Category
Type Size Active Size Pitch Size Resolution Refresh Frequency Contrast Ratio Brightness LED Lifespan
Voltage Temperature
Humidity Altitude Temperature Humidity Altitude w/o Wall Mount w/ Wall Mount Physical
On Sleep Off

Specifications
LDP135-151 Direct View LED Display 135" 118.11" (H) x 66.44" (V) 3,000 mm (H) x 1,687.5 mm(V) 1.5625 mm FHD, 1920 x 1080 4440Hz 6000:1 (Typical) 100-600 cd/m2 (8 levels of adjustments) 100,000 hours 6 x HDMI (1920 x 1080 @ 60Hz, HDCP 2.2) 1 x LAN (RJ45) 3 x USB Type A (2.0) 1 x USB Type C 2 x HDMI (1080p @ 60Hz) 1 x Audio Out (3.5 mm) 3 x USB Type A (Power)[5V/1.5A] 20W x 2 Harman-Kardon
RS-232 Serial Control
100-120V/30A ~ 50/60Hz 220-240V/15A ~ 50Hz (vary by country) 32° F to 104° F (0° C to 40° C) 20%~80% non-condensing 6,562 ft (2,000 m) -4° F to 140° F (-20° C to 60° C) 10%~90% non-condensing 6,562 ft (2,000 m) 118 ¹/" x 71 /" x ³/" (3010 x 1807.5 x 25 mm) 118 ¹/" x 71 /" x 2 ¹/" (3010 x 1807.5 x 57 mm) 265 lbs. (120 kg) 2,030W (Normal) 2,900W (Max)
<0.5W <0W

NOTE:Product specifications are subject to change without notice.

135

LED Display Stuck Pixel Definition

Item
Stuck Pixel (whole display)
Stuck Pixel (as marked in green)
Stuck Pixel (Single Module)

Acceptance Criteria
60 stuck pixels 15 stuck pixels 6 stuck pixels

136

Timing Chart
HDMI (PC) Resolution
640 x 480 720 x 400 800 x 600 832 x 624 1024 x 768 1152 x 864 1152 x 870 1280 x 720 1280 x 960 1280 x 1024 1360 x 768 1440 x 900 1680 x 1050 1600 x 1200 1920 x 1080 1920 x 1200 3840 x 2160

Refresh Rate (Hz) 60, 72, 75 70, 85
56, 60, 72, 75 75
60, 70, 75 60, 70, 75
75 60 60 60, 75 85 60 60 60, 70, 75 60 60 30, 60

137

HDMI (Video) Video
480i
576i 480p 576p 720p 1080i 1080p 2160p

Resolution 720 x 480 1440 x 480 720 x 576 1440 x 576 720 x 480 720 x 576 1440 x 576 1280 x 720 1920 x 1080 1920 x 1080 3840 x 2160

Refresh Rate (Hz) 60 60 50 50 60 50 50 60
50, 60 24, 25, 30, 50, 60
30, 60

NOTE: · The computer text quality is optimal in HD 1080 mode (1920 x 1080, 60Hz). · Your computer display screen might appear different depending on the manufacturer and your operating system. · Consult your computer's instructional manual on how to connect to an external display.
· If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 67.5KHz(horizontal). In some cases, abnormal signals (such as stripes) might appear on the screen when the computer power is turned off (or if the computer is disconnected). If this is the case, press the [INPUT SOURCE] button to enter the video mode and supply an active signal.
· The display timings conform to VESA and CTA standards.
· For 4:3 content, the screen will display them in the center of the screen and maintain a 4:3 aspect ratio.
· The optimal vertical frequency for each mode is 60Hz.

138

Supported Media Formats
Multimedia Codec Formats

Type File Type

Codec

Photo

PNG JPEG/JPG

H.263 .3gp
MPEG-4

MPEG-2/4 .avi
MJPEG

.flv

H.264

Video

.mkv

H.264 H.265

H.264

.mp4

H.265

MPEG-4

.vob

MPEG-2

.mpg/.mpeg

MPEG-2

Ability
Max Resolution: 8000 × 8000 Min Resolution : 4 x 4 Max Resolution: 8000 × 8000 Min Resolution : 4 x 41 Max Resolution: 1920 x 1080 30 Audio: AMR_NB
Max Resolution: 1920 x 1080 30 Audio: AMR_NB
Max Resolution: 1920 x 1080 30 Audio: MPEG_Audio_Layer3
Max Resolution: 1920 x 1080 30 Audio: MPEG_Audio_Layer3
Max Resolution: 1920 x 1080 30 Audio: AAC 2.0
Max Resolution: 1920 x 1080 30 Audio: AAC 2.0
Max Resolution: 1920 x 1080 30 Audio: AAC 2.0
Max Resolution: 3840 x 2160 30 Audio: MPEG_Audio_Layer3
Max Resolution: 3840 x 2160 30 Audio: MPEG_Audio_Layer3
Max Resolution: 1920 x 1080 30 Audio: MPEG_Audio_Layer3
Max Resolution: 1920 x 1080 30 Audio: PCM
Max Resolution: 1920 x 1080 30 Audio: MPEG_Audio_Layer3

Progressive support 4000 × 4000; baseline support 8000 x 8000.

139

Type
Audio

File Type
.aac .ape .flac .m4a .mp3 .ogg .wav

Codec
GAAC Monkey's Audio
FLAC ALAC MPEG1/2 layer 3 Vorbis LPCM

Ability
Sample Rate: 8K~96KHz Bit Rate: 24K~576Kbps Sample Rate: max 48KHz Bit Rate: max 1411Kbps Sample Rate: max 192KHz Bit Rate: max 1411Kbps Sample Rate: 8K~96KHz Bit Rate: 24K~576Kbps Sample Rate: 8K~48KHz Bit Rate: 32K~320Kbps Sample Rate: 8K~48KHz Bit Rate: max 256Kbps Sample Rate: 8K~192KHz Bit Rate: max 320Kbps

140

Troubleshooting

Problem or Issue
Remote Control is not working
The unit turns off unexpectedly
The power indicator is off, and there is no response The display does not recognize the USB storage device

Possible Solutions 1. Check whether something is obstructing the
display's remote control receiver.
2. Check whether the battery polarities in the remote control are installed correctly.
3. Check whether the batteries need to be replaced.
1. Check whether Sleep mode is enabled.
2. Check if there is a power outage in your area.
3. Turn on the display, provide an active signal, and see if the problem is with the signal or external control system.
1. Ensure the power cable is connected and not loose.
2. Check that the power outlet is functioning properly and meets the required electrical requirement.
1. Ensure the drive is either formatted for FAT32 or NTFS.
2. If the USB storage device needs external power, connect its power adapter to an electrical outlet.

Video Not Working Properly

Problem or Issue

Possible Solutions 1. Check the Power status.

No picture/No sound
Picture is unclear or cuts in and out

2. Check the signal cable.
3. Use the remote control to ensure the input source setting is the same as the connected device.
1. Check the signal cable.
2. Check if other electronics or different signal types are interrupting the signal.
3. An optional active video cable or optional video extender is required for a long distance source.

141

Problem or Issue Poor picture

Possible Solutions 1. Adjust chroma and/or brightness settings in the
menu.
2. Check the signal cable. 3. Use the display's native resolution for the source.

Audio Not Working Properly

Problem or Issue No sound

Possible Solutions 1. Press the Mute/Unmute button. 2. Adjust the volume. 3. Check the audio cable connection (if used). 4. If using a computer digital video with embedded
audio, ensure the computer speakers are set to external speakers.

One speaker only

1. Adjust the sound balance in the menu. 2. Check the left and right sound control panel settings
of the computer or media player source.
3. Check the audio cable connection (if used). 4. Ensure the content has two audio channels and not
mono.

142

Maintenance
General Precautions
· The LED lights used in the modules are susceptible to ESD (Electrostatic discharge). To prevent damage to the LED lights, do not touch them with bare hands or with conductive materials when handling.
· It is recommended to regularly inspect all installed components.
· Do not bring objects close to the ventilation holes of the display. Burns or personal injuries may occur if any body parts are brought too close.
· Be sure to power off and disconnect all cables before moving the display. Moving the display with its cables attached may damage the cables and thus cause fire or electric shock.
· Power off and disconnect the power plug from the wall outlet as a safety precaution before performing any type of cleaning or maintenance.
Initial Operation
· If a new screen has been stowed for less than three (3) months, it can be used at normal brightness during its first use.
· If a new screen has been stowed for more than three (3) months, the brightness should be set at 30% for its first use and allowed to operate for two (2) hours continuously. After two (2) hours of use, power off for 30 minutes. The new screen is now ready for normal brightness usage.
Front Panel Cleaning Instructions
· Use cool, compressed air to remove dust when the power is off. If the dust cannot be removed, the LED module should be replaced.
· Do not scratch and do not put pressure on the panel surface with fingers or any abrasive object.
· Do not use volatile substances such as sprays, solvents, or thinners.
Cabinet Cleaning Instructions
· Do not allow water or detergent to come into contact with the surface of the display. If water or moisture gets inside the unit, a system malfunction or electrical shock may occur.
· Do not scratch and do not put pressure on the cabinet with any abrasive objects of any kind.
· Do not use volatile substances such as sprays, solvents, or thinners on the cabinet.
· Do not place anything made from rubber or PVC near the cabinet for any extended periods of time.
143

Regular Use · It is recommended to turn on the display at least once a month for more than
eight (8) hours. During a wet and rainy season, it is recommended to turn on the display at least once a week. · Avoid using full white, full red, full blue, or full green content for an extended period to avoid excessive power usage thus affecting the LED lifespan.
144

Vacuum Suction Tool

Off

145

Charging the Battery
1 2
Changing the Battery
2 1
146

LED Module Disassembly

147

Overview

Number
1

Item
Lanyard Ring

Regulating Valve

LED Module Contact
3
Silicone

Power Display

Power Switch

Start Button

Battery Removal Button

Charging Port

Description
Lanyard attachment point. Adjust the suction force level. Cover the valve for the
strongest suction force. Soft contact surface for LED module removal.
Battery indicator. Turn the device On/Off. Engage/Disengage the suction force.
Press to remove the battery.
Port for battery charging.

Specifications Item Model
Suction Face Dimension
Available Module Size
Product Dimension
Weight Working Duration Working Temperature

Description
LD-MK-001 5.27" x 7.64" (134 x 194 mm) 7.56" x 7.56" to 19.69" x 19.69" (192 x 192 to 500 x 500 mm) 5.98" x 5.51" x 8.27" (152 x 140 x 210 mm)
2.58 lbs. (1.17 kg ) 17 minutes 37.4° to 131° F (3° to 55° C)

148

RS-232 Protocol

This document describes the hardware interface and software protocols of RS-232 serial communication between the ViewSonic LED Display and computers or control systems.
RS-232 Hardware Specification
ViewSonic RS-232 serial port on the lower left side: 1. Connector type: DB 9-Pin Female 2. Use of straight-through parallel cable for connection 3. Pin Assignment:

Female DB 9-Pin

Pin #
1 2 3 4 5 6 7 8 9 frame

Signal
NC TXD RXD NC GND NC NC NC NC
GND

Remark
Output from Display Input to Display
GND

RS-232 Communication Setting

- Baud Rate Select: - Data bits: - Parity: - Stop Bits:

115200bps (fixed) 8 bits (fixed) None (fixed) 1(fixed)

149

Command Table

Function
Power On Power Off (Standby)
Get-Power Status Input Select: HDMI 1 Input Select: HDMI 2
Get-Input Select Input Select: Home Brightness: Down (-1) Brightness: Up (+1) Volume: Down (-1)
Volume: Up (+1) Get-Volume Mute: OFF
Mute: ON (mute) Get-Mute
Number (0~9) Key Pad: UP Key Pad: DOWN Key Pad: LEFT Key Pad: RIGHT Key Pad: ENTER Key Pad: INPUT Key Pad: MENU Key Pad: EXIT Get-Operational Hours

Command Code (Hex)
21 21 6C 22 22 6A 22 24 24 35 35 66 36 36 67 40 41 41 41 41 41 41 41 41 31

HEX
38 30 31 73 21 30 30 31 0D 38 30 31 73 21 30 30 30 0D 38 30 31 67 6C 30 30 30 0D 38 30 31 73 22 30 30 34 0D 38 30 31 73 22 30 31 34 0D 38 30 31 67 6A 30 30 30 0D 38 30 31 73 22 30 30 41 0D 38 30 31 73 24 39 30 30 0D 38 30 31 73 24 39 30 31 0D 38 30 31 73 35 39 30 30 0D 38 30 31 73 35 39 30 31 0D 38 30 31 67 66 30 30 30 0D 38 30 31 73 36 30 30 30 0D 38 30 31 73 36 30 30 31 0D 38 30 31 67 67 30 30 30 0D 38 30 31 73 40 30 30 3x 0D 38 30 31 73 41 30 30 30 0D 38 30 31 73 41 30 30 31 0D 38 30 31 73 41 30 30 32 0D 38 30 31 73 41 30 30 33 0D 38 30 31 73 41 30 30 34 0D 38 30 31 73 41 30 30 35 0D 38 30 31 73 41 30 30 36 0D 38 30 31 73 41 30 30 37 0D 38 30 31 67 31 30 30 30 0D

Data Range
x = 0~9

150

Regulatory and Service Information
Compliance Information
This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels and relevant markings on the unit. FCC Compliance Statement
This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter. The device was tested and complies to measurement standards and procedures specified in FCC CFR Tile 47 Part 15 Subpart C.
151

FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Warning: You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
IC Warning Statement This device complies with Industry Canada license- exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : ( 1 ) l'appareil ne doit pas produire de brouillage, et ( 2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, méme si le brouillage est susceptible d'en compromettre le fonctionnement. Country Code Statement For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. Pour les produits disponibles aux États-Unis/Canada du marché, seul le canal 1 à 11 peuvent être exploités. Sélection d'autres canaux n'est pas possible.
152

IC Radiation Exposure Statement This equipment complied with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. The device for the band 5150-5825 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems. Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlê. Cet équipement doit être installé et utilize avec un minimum de 20cm de distance entre la source de rayonnement et votre corps. les dispositifs fonctionnant dans la bande 5150-5825 MHz sont réservés uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux. CE Conformity for European Countries
The device complies with the EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU. The following information is only for EU-member states: The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2012/19/EU (WEEE). The mark indicates the requirement NOT to dispose of the equipment as unsorted municipal waste, but use the return and collection systems according to local law.
153

Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below:

Substance
Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent Chromium (Cr6) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers (PBDE) Bis (2-ethylhexyl) phthalate (DEHP) Butyl benzyl phthalate (BBP) Dibutyl phthalate (DBP) Diisobutyl phthalate (DIBP)

Proposed Maximum Concentration 0.1%
0.1% 0.01% 0.1% 0.1%

Actual Concentration
< 0.1% < 0.1% < 0.01% < 0.1% < 0.1%

0.1%

< 0.1%

0.1% 0.1% 0.1% 0.1%

< 0.1% < 0.1% < 0.1% < 0.1%

Certain components of products as stated above are exempted under the Annex III of the RoHS2 Directives as noted below: · Copper alloy containing up to 4% lead by weight.
· Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).
· Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound.
· Lead in dielectric ceramic in capacitors for a rated voltage of 125V AC or 250V DC or higher.

European Union Regulatory Conformance

The equipment complies with the RF Exposure Requirement 2014/53/EU, Council Recommendation of 16 April 2014 on the limitation of exposure of the general public to electromagnetic fields (0-300 GHz). This equipment meets the following conformance standards: EN301489-1, EN301489-17, EN62368-1, EN300328.
We, hereby, declare that this Wi-Fi radio is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

154

Indian Restriction of Hazardous Substances Restriction on Hazardous Substances statement (India). This product complies with the "India E-waste Rule 2011" and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule. Product Disposal at End of Product Life ViewSonic® respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. Please visit the ViewSonic® website to learn more. USA & Canada: https://www.viewsonic.com/us/company/green/go-green-with-viewsonic/#recycleprogram Europe: https://www.viewsoniceurope.com/eu/support/call-desk/ Taiwan: https://recycle.epa.gov.tw/
155

Copyright Information
Copyright© ViewSonic® Corporation, 2022. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Inc. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic®, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic® Corporation. VESA is a registered trademark of the Video Electronics Standards Association. DPMS, DisplayPort, and DDC are trademarks of VESA. CTA is a registered trademark of the Consumer Technology Association Standards. Disclaimer: ViewSonic® Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. In the interest of continuing product improvement, ViewSonic® Corporation reserves the right to change product specifications without notice. Information in this document may change without notice. No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from ViewSonic® Corporation.
LDP135-151_UG_ENG_1a_20220714 156

Customer Service
For technical support or product service, see the table below or contact your reseller.
NOTE:You will need the product's serial number.

Country/ Region

Website

Country/ Region

Website

Asia Pacific & Africa

Australia (China)

www.viewsonic.com/au/ www.viewsonic.com.cn

Bangladesh ()

www.viewsonic.com/bd/ www.viewsonic.com/hk/

Hong Kong (English)

www.viewsonic.com/hk-en/

India

www.viewsonic.com/in/

Indonesia (Japan)

www.viewsonic.com/id/ www.viewsonic.com/jp/

Israel Korea

www.viewsonic.com/il/ www.viewsonic.com/kr/

Malaysia

www.viewsonic.com/my/

Middle East

www.viewsonic.com/me/

Myanmar

www.viewsonic.com/mm/

Nepal

www.viewsonic.com/np/

New Zealand

www.viewsonic.com/nz/

Pakistan

www.viewsonic.com/pk/

Philippines (Taiwan)

www.viewsonic.com/ph/ www.viewsonic.com/tw/

Singapore

www.viewsonic.com/sg/ www.viewsonic.com/th/

Vit Nam

www.viewsonic.com/vn/

South Africa & Mauritius www.viewsonic.com/za/

Americas

United States

www.viewsonic.com/us

Canada

www.viewsonic.com/us

Latin America

www.viewsonic.com/la

Europe

www.viewsonic.com/eu/

France

www.viewsonic.com/fr/

Deutschland

www.viewsonic.com/de/

www.viewsonic.com/kz/

www.viewsonic.com/ru/

España

www.viewsonic.com/es/

Türkiye

www.viewsonic.com/tr/

www.viewsonic.com/ua/

United Kingdom

www.viewsonic.com/uk/

157

Limited Warranty
ViewSonic® Commercial Display
What the warranty covers: ViewSonic® warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic® will, at its sole option, and as your sole remedy, repair or replace the product with a similar product. Replacement Product or parts may include remanufactured or refurbished parts or components. The repair or replacement unit or parts or components will be covered by the balance of the time remaining on the customer's original limited warranty and the warranty period will not be extended. ViewSonic® provides no warranty for any third-party software whether included with the product or installed by the customer, installation of any unauthorized hardware parts or components (e.g. Projector Lamps). (Please refer to: "What the warranty excludes and does not cover" section).
Who the warranty protects: This warranty is valid only for the first consumer purchaser.
What the warranty excludes and does not cover: · Any product on which the serial number has been defaced, modified, or
removed. · Damage, deterioration, or malfunction resulting from:
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by ViewSonic®. Damage to or loss of any programs, data, or removable storage media. Normal wear and tear. Removal or installation of the product. · Software or data loss occurring during repair or replacement. · Any damage of the product due to shipment. · Causes external to the product, such as electric power fluctuations or failure. · Use of supplies or parts not meeting ViewSonic's specifications. · Failure of owner to perform periodic product maintenance as stated in the User Guide.
158

· Any other cause which does not relate to a product defect. · Damage caused by static (non-moving) images displayed for lengthy periods of
time (also referred to as image burn-in). · Software - Any third-party software included with the product or installed by the
customer. · Hardware/Accessories/Parts/Components Installation of any unauthorized
hardware, accessories, consumable parts or components (e.g. Projector Lamps). · Damage to, or abuse of, the coating on the surface of the display through
inappropriate cleaning as described in the product User Guide. · Removal, installation, and set-up service charges, including wall-mounting of the
product.
How to get service: · For information about receiving service under warranty, contact ViewSonic®
Customer Support (Please refer to the "Customer Service" page). You will need to provide your product's serial number. · To obtain warranty service, you will be required to provide: (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of the product. · Take or ship the product, freight prepaid, in the original container to an authorized ViewSonic® service center or ViewSonic®. · For additional information or the name of the nearest ViewSonic® service center, contact ViewSonic®.
Limitation of implied warranties: There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose.
159

Exclusion of damages: ViewSonic's liability is limited to the cost of repair or replacement of the product. ViewSonic® shall not be liable for: · Damage to other property caused by any defects in the product, damages
based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages. · Any other damages, whether incidental, consequential or otherwise. · Any claim against the customer by any other party. · Repair or attempted repair by anyone not authorized by ViewSonic®.
Effect of state law: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow limitations on implied warranties and/or do not allow the exclusion of incidental or consequential damages, so the above limitations and exclusions may not apply to you.
Sales outside the U.S.A. and Canada: For warranty information and service on ViewSonic® products sold outside of the U.S.A. and Canada, contact ViewSonic® or your local ViewSonic® dealer. The warranty period for this product in mainland China (Hong Kong, Macao, and Taiwan Excluded) is subject to the terms and conditions of the Maintenance Guarantee Card. For users in Europe and Russia, full details of warranty provided can be found at: http://www.viewsonic.com/eu/ under "Support/Warranty Information".
Smart White Board Warranty Term Template In UG VSC_TEMP_2013
160

Mexico Limited Warranty
ViewSonic® Commercial Display
What the warranty covers: ViewSonic® warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic® will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components & accessories.
Who the warranty protects: This warranty is valid only for the first consumer purchaser.
What the warranty excludes and does not cover: · Any product on which the serial number has been defaced, modified or
removed. · Damage, deterioration, or malfunction resulting from:
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, unauthorized attempted repair, or failure to follow instructions supplied with the product.
Causes external to the product, such as electrical power fluctuations or failure.
Use of supplies or parts not meeting ViewSonic®'s specifications. Normal wear and tear. Any other cause which does not relate to a product defect. · Any product exhibiting a condition commonly known as "image burn-in" which results when a static image is displayed on the product for an extended period of time. · Removal, installation, insurance, and set-up service charges.
161

How to get service:
For information about receiving service under warranty, contact ViewSonic® Customer Support (Please refer to the attached "Customer Service" page). You will need to provide your product's serial number, so please record the product information in the space provided below on your purchase for your future use. Please retain your receipt of proof of purchase to support your warranty claim.

For Your Records
Product Name: Document Number: Purchase Date: If so, what date does warranty expire?

Model Number: Serial Number: Extended Warranty Purchase?

(Y/N)

· To obtain warranty service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of the product.
· Take or ship the product, in the original container packaging, to an authorized ViewSonic® service center.
· Round trip transportation costs for in-warranty products will be paid by ViewSonic®.

Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose.

Exclusion of damages:
ViewSonic®'s liability is limited to the cost of repair or replacement of the product. ViewSonic® shall not be liable for:
· Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages.
· Any other damages, whether incidental, consequential or otherwise.
· Any claim against the customer by any other party.
· Repair or attempted repair by anyone not authorized by ViewSonic®.

162

Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico:

Name, address, of manufacturer and importers:
México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic.com/la/soporte/index.htm

NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004

Hermosillo:
Distribuciones y Servicios Computacionales SA de CV. Calle Juarez 284 local 2 Col. Bugambilias C.P: 83140 Tel: 01-66-22-14-9005 E-Mail: disc2@hmo.megared.net.mx

Villahermosa:
Compumantenimietnos Garantizados, S.A. de C.V. AV. GREGORIO MENDEZ #1504 COL, FLORIDA C.P. 86040 Tel: 01 (993) 3 52 00 47 / 3522074 / 3 52 20 09 E-Mail: compumantenimientos@prodigy.net.mx

Puebla, Pue. (Matriz):
RENTA Y DATOS, S.A. DE C.V. Domicilio: 29 SUR 721 COL. LA PAZ 72160 PUEBLA, PUE. Tel: 01(52).222.891.55.77 CON 10 LINEAS E-Mail: datos@puebla.megared.net.mx

Veracruz, Ver.:
CONEXION Y DESARROLLO, S.A DE C.V. Av. Americas # 419 ENTRE PINZÓN Y ALVARADO Fracc. Reforma C.P. 91919 Tel: 01-22-91-00-31-67 E-Mail: gacosta@qplus.com.mx

Chihuahua:
Soluciones Globales en Computación C. Magisterio # 3321 Col. Magisterial Chihuahua, Chih. Tel: 4136954 E-Mail: Cefeo@soluglobales.com

Cuernavaca:
Compusupport de Cuernavaca SA de CV Francisco Leyva # 178 Col. Miguel Hidalgo C.P. 62040, Cuernavaca Morelos Tel: 01 777 3180579 / 01 777 3124014 E-Mail: aquevedo@compusupportcva.com

Distrito Federal:
QPLUS, S.A. de C.V. Av. Coyoacán 931 Col. Del Valle 03100, México, D.F. Tel: 01(52)55-50-00-27-35 E-Mail : gacosta@qplus.com.mx

Guadalajara, Jal.:
SERVICRECE, S.A. de C.V. Av. Niños Héroes # 2281 Col. Arcos Sur, Sector Juárez 44170, Guadalajara, Jalisco Tel: 01(52)33-36-15-15-43 E-Mail: mmiranda@servicrece.com

Guerrero Acapulco:
GS Computación (Grupo Sesicomp) Progreso #6-A, Colo Centro 39300 Acapulco, Guerrero Tel: 744-48-32627

Monterrey:
Global Product Services Mar Caribe # 1987, Esquina con Golfo Pérsico Fracc. Bernardo Reyes, CP 64280 Monterrey N.L. México Tel: 8129-5103 E-Mail: aydeem@gps1.com.mx

MERIDA:
ELECTROSER Av Reforma No. 403Gx39 y 41 Mérida, Yucatán, México CP97000 Tel: (52) 999-925-1916 E-Mail: rrrb@sureste.com

Oaxaca, Oax.:
CENTRO DE DISTRIBUCION Y SERVICIO, S.A. de C.V. Murguía # 708 P.A., Col. Centro, 68000, Oaxaca Tel: 01(52)95-15-15-22-22 Fax: 01(52)95-15-13-67-00 E-Mail. gpotai2001@hotmail.com

Tijuana:
STD Av Ferrocarril Sonora #3780 L-C Col 20 de Noviembr Tijuana, Mexico

FOR USA SUPPORT:
ViewSonic® Corporation 381 Brea Canyon Road, Walnut, CA. 91789 USA Tel: 800-688-6688 E-Mail: http://www.viewsonic.com

Smart White Board Warranty Term Template In UG VSC_TEMP_2013
163

References

Adobe PDF Library 16.0.7 Adobe InDesign 17.3 (Windows)