Instruction Manual for iskydance models including: S3 RGB-CCT-Dimming 3 Channel High Voltage LED Strip Controller, S3, RGB-CCT-Dimming 3 Channel High Voltage LED Strip Controller, Dimming 3 Channel High Voltage LED Strip Controller, High Voltage LED Strip Controller, LED Strip Controller, Strip Controller, Controller
Technical Parameters. Input and Output Input voltage Input current. Output voltage Output current Output power. 110-240VAC 3.2A 3 x (110-240)VDC 3CH,1A/CH 3 x (110-240)W.. View
Technical Parameters. Input and Output Input voltage Input current. Output voltage Output current Output power. 110-240VAC 3.2A 3 x (110-240)VDC 3CH,1A/CH 3 x (110-240)W. Dimming data Input...
RGB/CCT/Dimming 3 Channel High Voltage LED Strip Controller Model No.: S3 3 Channels/Step-less dimming/Wireless remote control/Auto-transmitting/Synchronize Features LVD RED 3 channel high voltage LED strip RF 2.4G controller, can control maximum about 50 meters of high voltage LED strip, different LED strip may have difference. Match with RF 2.4G single zone or multiple zone single color, dual color and RGB/RGBW remote control. One RF controller accept up to 10 remote control. 4096 levels 0-100% dimming smoothly without any flash. When using with RGB light, built in 10 dynamic mode, include jump or gradual change style. Auto-transmitting function: Controller automatically transmit signal to another controller with 30m control distance. Synchronize on multiple number of controllers. Fade in and out effect selectable. Technical Parameters Input and Output Input voltage Input current Output voltage Output current Output power 110-240VAC 3.2A 3 x (110-240)VDC 3CH,1A/CH 3 x (110-240)W Dimming data Input signal Control distance Dimming level Dimming range Dimming curve PWM Frequency RF 2.4GHz 30m(Barrier-free space) 4096 levels 0 -100% Logarithmic 2KHz User Manual Ver 1.0.6 Safety and EMC EMC standard (EMC) Safety standard(LVD) Radio Equipment(RED) Certification ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4 EN 62368-1:2020+A11:2020 ETSI EN 300 328 V2.2.2 CE,EMC,LVD,RED Environment Operation temperature Case temperature (Max.) IP rating Ta: -30 OC ~ +55 OC T c: +85OC IP20 Warranty and Protection Warranty 5 years Weight Net weight Gross weight 0.117kg 0.136kg S3 RGB/CCT/Dimming 3 Channel High Voltage LED Strip Controller Mechanical Structures and Installations LED indicator Match key MAT CH AC N input AC L input INPUT 110-240VA C N L 45mm 175mm 160mm OUTPUT W1 W2 W3 WW NW NC RG B +++ 27mm Output CH3/Blue LED Output CH2/Green LED - Installation rack Output CH1/Red LED Output LED + Wiring Diagram Caution: This controller apply for high voltage LED strip, please carefully ensure all wire connections and polarities are correct and secure before applying powe,r otherwise this controller or high voltage LED strip will be damaged. S3 connect with RGB LED strip OUTPUT W1 W2 W3 WW NW NC RG B N AC110-240V INPUT 110-240VA C N L MAT CH +++ High voltage RGB LED strip S3 connect with dual color LED strip OUTPUT W1 W2 W3 WW NW NC RG B N AC110-240V INPUT 110-240VA C N L MAT CH +++ High voltage dual color LED strip CW Page 1 S3 connect with single color LED strip OUTPUT W1 W2 W3 WW NW NC RG B N AC110-240V INPUT 110-240VA C N L MAT CH +++ High voltage single color LED strip High voltage single color LED strip High voltage single color LED strip Match Remote Control (two match ways) End user can choose the suitable match/delete ways. Two options are offered for selection: Use the controller's Match key Use Power Restart Match: Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) of the remote. Match: Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful. Delete: Press and hold match key for 5s to delete all match, The light blinks 5 times means all matched remotes were deleted. .Delete: Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted. Fade in and Fade out Setting Long press match key 5s, then short press match key 3 times, The lighting effect will be set to the fade in and fade out in 3s, the indicator light of LED controller blinks 3 times. Long press match key 10s, restore factory default parameter, the light on/off time restores to 0.5s. RGB dynamic mode list No. Name No. Name 1 RGB jump 6 RGB fade in and out 2 RGB smooth 7 Red fade in and out 3 6 color jump 8 Green fade in and out 4 6 color smooth 9 Blue fade in and out 5 Yellow cyan purple smooth 10 White fade in and out User Manual Ver 1.0.6 Application notes 1. All the receivers in the same zone. S3 RGB/CCT/Dimming 3 Channel High Voltage LED Strip Controller 30m 30m 30m RF remote Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m, as long as there is a receiver within 30m, the remote control distance can be extended. Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlled by the same remote, under same dynamic mode and with same speed. Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range. Strong signal sources such as WiFi routers and microwave ovens will affect the range. We recommend for indoor applications that receiver placements should be no further apart than15m. 2. Each receiver(one or more) in a different zone, like zone 1, 2, 3 or 4. Zone 1 Zone 2 30m 30m Zone 3 Zone 4 RF remote Dual color control WW=Warm white LED CW=Cool white LED Each channel can supply up to 240W@240VAC and white balance can be controlled as such: Color temperature Power distribution Cool white WW=0W,CW=240W Neutral white WW=120W,CW=120W Warm white WW=240W,CW=0W Linear dual color tuning Warm white(Min. 2700K) Neutral white(4000K) Cool white(Max. 6500K) Recommended CCT range PPW WMM dduuttyy((%%)) PWM duty(%) Dimming curve for CCT 110000 9900 8800 7700 6600 5500 4400 3300 2200 1100 Gamma=1.0 10 20 30 40 50 60 70 80 90 100 Brightness(%) Dimming curve for RGB/DIM 100 Gamma=1.6 90 80 70 60 50 40 30 20 10 10 20 30 40 50 60 70 80 90 100 Brightness(%) Page 2Corel PDF Engine Version 16.1.0.843 CorelDRAW X6