ARCO FRONT FLASH Bicycle Light
Instruction Manual
Mounting
Diagram 1 shows the ARCO FRONT FLASH light being mounted onto a bicycle handlebar. The light is designed to fit handlebars with a diameter ranging from 22.2mm to 31.8mm. An arrow indicates the direction of attachment.
Operation Modes
The ARCO FRONT FLASH light is operated via a single button. The following sequences control its functions:
- Press and hold for 1 second: Turns the light ON.
- 2x Quick Presses: Activates ON ECO mode.
- 3x Quick Presses: Activates ON FLASH mode.
- Press and hold for 1 second: Turns the light OFF.
Battery Life:
- ON mode: Approximately 5 hours
- ON ECO mode: Approximately 8 hours
- ON FLASH mode: Approximately 10 hours
Charging
To charge the ARCO FRONT FLASH light, connect the provided USB cable to the light's charging port and then to a standard USB power source (e.g., computer, wall adapter). The charging process takes approximately 2 hours and 30 minutes (2h30).
Battery Status Indicators:
- Low Battery: Indicated by a red battery symbol with a cross [!].
- Full Charge: Indicated by a green battery symbol with full bars ?.
General Information
The ARCO FRONT FLASH is a bicycle front light designed to enhance visibility and safety. The '100%' notation in the diagrams refers to the light's maximum output or beam coverage.
