User Manual for CYP models including: PUV-3000RX UHD HDMI Over HDBaseT 3.0 Receiver, PUV-3000RX, UHD HDMI Over HDBaseT 3.0 Receiver, HDBaseT 3.0 Receiver, 3.0 Receiver, Receiver

Manual

PUV-3000RX - UHD HDMI over HDBaseT 3.0 Receiver (18Gbps, 4K@60Hz 4:4:4, 8-bit) - CYP Europe

PUV-3000RX Manual

PUV-3000RX - UHD HDMI over HDBaseT 3.0 Receiver (18Gbps, 4K@60Hz 4:4:4, 8-bit) - CYP

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • Text

File Info : application/pdf, 20 Pages, 4.23MB

®
PUV-3000RX
UHD+ HDMI over HDBaseT 3.0 Receiver (18Gbps, 4K@60Hz 4:4:4, 8-bit) OPERATION MANUAL

DISCLAIMERS
The information in this manual has been carefully checked and is believed to be accurate. CYP (UK) Ltd assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be contained in this document. CYP (UK) Ltd also makes no commitment to update or to keep current the information contained in this document. CYP (UK) Ltd reserves the right to make improvements to this document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated into any language or computer file, in any form or by any means--electronic, mechanical, magnetic, optical, chemical, manual, or otherwise--without express written permission and consent from CYP (UK) Ltd. © Copyright 2021 by CYP (UK) Ltd. All Rights Reserved. Version 1.1
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment:
· Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
· To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
· Never spill liquid of any kind on or into this product.
· Never push an object of any kind into this product through any openings or empty slots in the unit, as you may damage parts inside the unit.
· Do not attach the power supply cabling to building surfaces.
· Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged.
· Do not allow anything to rest on the power cabling or allow any weight to be placed upon it or any person walk on it.
· To protect the unit from overheating, do not block any vents or openings in the unit housing that provide ventilation and allow for sufficient space for air to circulate around the unit.
· Please completely disconnect the power when the unit is not in use to avoid wasting electricity.

VERSION HISTORY

REV. DATE v1.00 04/11/2021 v1.01 03/05/2022 v1.02 05/05/2022 v1.03 27/10/2022

SUMMARY OF CHANGE Preliminary release Corrections to cable distance/cover image Corrections to image/silkscreen New IR/RS-232 Diagrams

CONTENTS
1. Introduction ..................................................1 2. Applications ..................................................1 3. Package Contents .........................................1 4. System Requirements ..................................1 5. Features.........................................................2 6. Operation Controls and Functions ..............3
6.1 Front Panel ............................................................3 6.2 Rear Panel ..............................................................4 6.3 IR Cable Pinouts ...................................................5 6.4 Serial Pinout ..........................................................5 7. Connection Diagram ....................................6 8. Specifications................................................7 8.1 Technical Specifications ....................................7 8.2 Video Specifications............................................8 8.3 Audio Specifications........................................ 10
8.3.1 Digital Audio ........................................... 10 8.4 Cable Specifications ........................................ 10 8.5 HDBaseT Features............................................. 11 9. Acronyms.....................................................12

1. INTRODUCTION
This 4K UHD+ HDMI over HDBaseT receiver uses HDBaseT 3.0, the newest generation of HDBaseT technology, and when combined with a compatible transmitter is the perfect solution for extending full bandwidth (18Gbps) HDMI 2.0, 4K@60Hz (4:4:4, 8-bit) video with HD audio via a single run of Cat.6A/7 cable over distances of up to 40 meters. Multiple control and data signals may also be extended along with the audio and video, including bi-directional IR and RS-232. This receiver is ideal for use in any video extension scenario, but it excels when latency-free, uncompressed, high resolution video is critical, such as medical installations, live conferences, and education.
2. APPLICATIONS
 Household entertainment sharing and control  Lecture hall/classroom display and control  Meeting room presentation and control
3. PACKAGE CONTENTS
 1× UHD+ HDMI over HDBaseT Receiver  1× 8-pin Terminal Block  1× Operation Manual
4. SYSTEM REQUIREMENTS
 A compatible HDBaseT transmitter with PoH (PSE) support is required.  HDMI receiving equipment such as an HDTV, monitor, or audio
amplifier.  The use of Premium High Speed HDMI cables, and industry standard
Cat.6A or Cat.7 Ethernet cable is highly recommended.
1

5. FEATURES
 HDMI 2.0 and DVI 1.0 compatible  HDCP 2.2 and HDCP 1.x compliant  HDBaseT 3.0 compliant (Backwards compatible with HDBaseT 2.0/1.0)  1 HDMI input, 1 HDMI output, and 1 HDBaseT input  Supports up to 4K UHD+ (18Gbps, 4K@60Hz 4:4:4, 8-bit) video input
and output over both HDMI and HDBaseT  Supports Deep Colour input and output up to 12-bit  Supports 10-bit and 12-bit HDR (High Dynamic Range) input/output  Supports CEC bypass  HDBaseT extends video, audio and data over a single Cat.6A/7 cable
and can reach distances up to 40m/131ft  HDBaseT feature support: HD Video and Audio, PoH (PD), and Control
(bi-directional IR/RS-232 pass-through)  Powered directly via PoH from the connected transmitter
2

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

1

3

PUV-3000RX

T

R PWR

IR

LINK

2

4

1 RS-232 4-pin Terminal Block: Connect to a PC, laptop, or serial controllable device with a 4-pin adapter cable for the extension of RS-232 signals between both ends of the HDBaseT connection.
2 IR 4-pin Terminal Block (In/Out): Connect to both an IR Blaster and Extender using a 4-pin Y-adapter cable to transmit and receive IR control signals and extend them to devices connected to the other end of the HDBaseT connection.
3 Power LED: This LED will illuminate to indicate the unit is on and receiving power.
4 LINK LED: This LED will illuminate solidly when a live connection with a compatible receiver is active.

3

6.2 Rear Panel

USB CAT6A/7 IN

HDMI IN

HDMI OUT

12

3

4

1 USB Port (Micro-B): This port is reserved for firmware update use only.
2 CAT6A/7 IN Port: Connect to a compatible HDBaseT transmitter with a single Cat.6A/7 cable for extension of all data signals. Power via PoH will also be supplied to this unit when connected to a compatible PSE transmitter.
Note: A compatible PoH (PSE) transmitter is REQUIRED to power this receiver. Transmitters from other brands may not be compatible.
3 HDMI IN Port: Connect to HDMI source equipment such as a media player, game console, or set-top box.
Note: If this HDMI input is connected, its video will automatically be output over the local HDMI output, overriding any current HDBaseT video source.
4 HDMI OUT port: Connect to an HDMI TV, monitor, or amplifier for digital video and audio output.

4

6.3 IR Cable Pinouts IR Blaster + IR Extender

To IR Emitter 4-pin Terminal Block
To IR Reciever

1 NC 2 NC 3 GND (White) 4 TxD (Red)
1 RxD (White) 2 3.3V (Red) 3 GND (Black) 4 NC

6.4 Serial Pinout

1 NC 2 RxD (Red) 3 GND (Black) 4 TxD (White)

5

7. CONNECTION DIAGRAM
Tower PC

Local Monitor

Power Supply

3m 7m 3m 60°

USB
HDMI Input

RS-232 USB

PUV-3000TX

T

R PWR

IR

LINK

DC 24V

USB CAT6A/7 OUT

HDMI IN

HDMI OUT

1.5m 60°
IR Input & Output
HDMI Output

PUV-3000RX

T

R PWR

IR

LINK

USB CAT6A/7 IN

HDMI IN

HDMI OUT

Cat 6A/7 Cable

RS-232

HDMI Output

IR Input & Output
60° 1.5m
60° 3m 7m 3m

Serial Controlled Device

Smart TV

6

8. SPECIFICATIONS

8.1 Technical Specifications

HDMI Bandwidth

18Gbps

HDBaseT Bandwidth

18Gbps

Input Ports

1×HDBaseT (RJ-45) 1×HDMI (Type-A)

Output Ports

1×HDMI (Type-A)

Pass-through Ports

1×IR In/Out (4-pin Terminal Block) 1×RS-232 (4-pin Terminal Block)

Pass-through/Service Port 1×USB 2.0 (Micro-B)

IR Frequency

30 ~ 50kHz (30 ~ 60kHz under ideal conditions)

Baud Rate

Up to 115200

Power Supply

PoH (from Tx)

ESD Protection (HBM)

±8kV (Air Discharge) ±4kV (Contact Discharge)

Dimensions (W×H×D)

128mm×25mm×108mm [Case Only] 128mm×25mm×109.5mm [All Inclusive]

Weight

390g

Chassis Material

Metal (Steel)

Chassis Colour

Black

Operating Temperature 0°C ­ 50°C/32°F ­ 122°F

Storage Temperature

-20°C ­ 60°C/-4°F ­ 140°F

Relative Humidity

20 ­ 90% RH (Non-condensing)

Power Consumption

14W

7

8.2 Video Specifications
Supported Resolutions (Hz) 720×400p@70/85 640×480p@60/72/75/85 720×480i@60 720×480p@60 720×576i@50 720×576p@50 800×600p@56/60/72/75/85 848×480p@60 1024×768p@60/70/75/85 1152×864p@75 1280×720p@50/60 1280×768p@60/75/85 1280×800p@60/75/85 1280×960p@60/85 1280×1024p@60/75/85 1360×768p@60 1366×768p@60 1400×1050p@60 1440×900p@60/75 1600×900p@60RB 1600×1200p@60 1680×1050p@60 1920×1080i@50/60

Input

HDMI HDBT





























































































Output
HDMI
                      

8

Supported Resolutions (Hz) 1920×1080p@24/25/30 1920×1080p@50/60 1920×1200p@60RB 2560×1440p@60RB 2560×1600p@60RB 2048×1080p@24/25/30 2048×1080p@50/60 3840×2160p@24/25/30 3840×2160p@50/60 (4:2:0) 3840×2160p@24, HDR10 3840×2160p@50/60 (4:2:0), HDR10 3840×2160p@50/60 4096×2160p@24/25/30 4096×2160p@50/60 (4:2:0) 4096×2160p@24, HDR10 4096×2160p@50/60 (4:2:0), HDR10 4096×2160p@50/60

Input

HDMI HDBT





































































Output
HDMI
                

9

8.3 Audio Specifications 8.3.1 Digital Audio

HDMI Input / Output & HDBaseT Output

LPCM

Max Channels

8 Channels

Sampling Rate (kHz) 32, 44.1, 48, 88.2, 96, 176.4, 192

Bitstream

Supported Formats Standard & High-Definition

8.4 Cable Specifications

1080p

4K30 4K60

Cable Length

(4:4:4) (4:4:4) 8-bit 12-bit 8-bit 8-bit

High Speed HDMI Cable

HDMI Input HDMI Output

10m 10m 5m 3m 10m 10m 5m 3m

Ethernet Cable

Cat.5e/6 Cat.6A/7

*

N/A

40m

*Results with Cat 5e/6 will vary
Bandwidth Category Examples: 1080p (FHD Video)
- Up to 1080p@60Hz, 12-bit colour - Data rates lower than 5.3Gbps or below 225MHz TMDS clock 4K30 (4K UHD Video) - 4K@24/25/30Hz & 4K@50/60Hz (4:2:0), 8-bit colour - Data rates higher than 5.3Gbps or above 225MHz TMDS clock but below
10.2Gbps 4K60 (4K UHD+ Video)
- 4K@50/60Hz (4:4:4, 8-bit) - 4K@50/60Hz (4:2:0, 10-bit HDR)

10

- Data rates higher than 10.2Gbps
8.5 HDBaseT Features
HDBaseT Feature Set Video & Audio Extension LAN Extension Send power to Transmitter Accept power from Transmitter IR Extension RS-232 Extension USB 2.0 Extension

Receiver Supported Unsupported Unsupported Supported (PoH) Supported Supported Unsupported

11

9. ACRONYMS

ACRONYM 4K UHD 4K UHD+ AVoIP Cat.5e Cat.6 Cat.6A Cat.7 DVI EDID GbE Gbps HDBT HDCP HDMI HDR IR kHz LED LPCM MHz PD PoH PSE TMDS

COMPLETE TERM 4K Ultra-High-Definition (10.2Gbps max) 4K Ultra-High-Definition (18Gbps max) Audio/Video over IP Enhanced Category 5 cable Category 6 cable Augmented Category 6 cable Category 7 cable Digital Visual Interface Extended Display Identification Data Gigabit Ethernet Gigabits per second HDBaseT High-bandwidth Digital Content Protection High-Definition Multimedia Interface High Dynamic Range Infrared Kilohertz Light-Emitting Diode Linear Pulse-Code Modulation Megahertz Powered Device Power over HDBaseT Power Sourcing Equipment Transition-Minimised Differential Signaling

12

ACRONYM USB VGA WUXGA (RB)
XGA

COMPLETE TERM Universal Serial Bus Video Graphics Array Widescreen Ultra Extended Graphics Array (Reduced Blanking) Extended Graphics Array

CYP (UK) Ltd., Unit 7, Shepperton Business Park, Govett Avenue, Shepperton, Middlesex, TW17 8BA
Tel: +44 (0) 20 3137 9180 | Fax: +44 (0) 20 3137 6279 Email: sales@cypeurope.com www.cypeurope.com v1.03