User Manual for Mean Well models including: PLP-45 Series 45W Single Output LED Power Supply, PLP-45 Series, 45W Single Output LED Power Supply, Output LED Power Supply, LED Power Supply, Power Supply
[Mean Well] PLP-45-24 전원/파워소스 > AC-DC컨버터 (주)엘레파츠 - 엘레파츠
File Info : application/pdf, 3 Pages, 547.88KB
DocumentDocument45W Single Output LED Power Supply
PLP-45 series
·
User's Manual
SPECIFICATION
Bauar t gepruft Sicherheit
egelma ge od o s be wac g
www. tuv.com ID 2000000000
MODEL
PLP-45-12
PLP-45-24
PLP-45-48
OUTPUT INPUT
DC VOLTAGE
12V
24V
CONSTANT CURRENT REGION Note.5 9 ~ 12V
18 ~ 24V
RATED CURRENT
3.8A
1.9A
CURRENT RANGE
0 ~ 3.8A
0 ~ 1.9A
RATED POWER
45.6W
45.6W
RIPPLE & NOISE (max.) Note.2 4.2Vp-p
3.8Vp-p
CURRENT ADJ. RANGE
2.85 ~ 3.8A
VOLTAGE TOLERANCE Note.3 ±10%
LINE REGULATION
±3.0%
LOAD REGULATION
±5.0%
1.425 ~ 1.9A
SETUP TIME
500ms / 230VAC 1200ms / 115VAC at full load
VOLTAGE RANGE Note.4 90 ~ 264VAC 127 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF0.9 at 75 ~ 100% load, 115VAC / 230VAC
TOTAL HARMONIC DISTORTION THD< 20% when output loading75%at 115VAC/230VAC input
EFFICIENCY (Typ.)
86%
89%
AC CURRENT (Typ.) INRUSH CURRENT (max.)
0.6A/115VAC 0.3A/230VAC COLD START 30A(twidth=50s measured at 50% Ipeak) at 230VAC
48V 36 ~ 48V 0.95A 0 ~ 0.95A 45.6W 4.8Vp-p 0.715 ~ 0.95A
89%
MAX.No. of PSUs on 16A CIRCUIT BREAKER
LEAKAGE CURRENT
42units (circuit breaker of type B) / 42 units (circuit breaker of type C) at 230VAC <0.75mA / 240VAC
OVER CURRENT
Note.5 100 ~ 110% Protection type : Constant current limiting, recovers automatically after fault condition is removed
PROTECTION SHORT CIRCUIT
Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE
15 ~ 18V
28 ~ 35V
Protection type : Shut down o/p voltage, re-power on to recover
57 ~ 63V
WORKING TEMP.
-30 ~ +70 (Refer to "Derating Curve")
WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
20 ~ 95% RH non-condensing -40 ~ +80, 10 ~ 95% RH ±0.03%/ (0 ~ 50)
VIBRATION
10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY STANDARDS
GB19510.1,GB19510.14,UL8750, TUV BS EN/EN61347-1, BS EN/EN61347-2-13, CSA C22.2 No. 250.0-08(except for 48V), EAC TP TC 004 approved ; design refer to UL60950-1
SAFETY & WITHSTAND VOLTAGE
EMC
ISOLATION RESISTANCE EMC EMISSION
I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH Compliance to GB17625,GB17743, BS EN/EN55015, BS EN/EN61000-3-2 Class C(75% load); BS EN/EN61000-3-3,EAC TP TC 020
EMC IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035,BS EN/EN61547, light industry level, EAC TP TC 020
MTBF
4717.9K hrs min. Telcordia SR-332 (Bellcore) ; 586.6K hrs min. MIL-HDBK-217F (25)
OTHERS DIMENSION
101.6*50.8*29.6mm (L*W*H)
PACKING
0.16Kg; 96pcs/16.4Kg/0.89CUFT
NOTE
https://www.meanwell.com/serviceDisclaimer.aspx
Downloaded from Arrow.com.
File Name:PLP-45-SPEC 2022-08-04
45W Single Output LED Power Supply
PLP-45 series
Mechanical Specification
3.175
FS1 1 2 3 CN1
M1
50..8 .44.45
3.175
101.6 95.25
HS1
HS2 M2
SVR1
CN2 1 2
M3 4-3.2
Unit:mm
3max.
29.6
AC Input Connector (CN1) : JST B3P-VH or equivalent
Pin No. Assignment Mating Housing
Terminal
1
AC/L
2
No Pin
JST VHR
JST SVH-21T-P1.1
or equivalent
or equivalent
3
AC/N
Block Diagram
EMI FILTER
I/P
&
RECTIFIERS
POWER SWITCHING
FG
O.L.P.
PWM & PFC
CONTROL
Derating Curve
1.HS1,HS2 cannot be shorted. 2.HS1 must have safety isolation distance
with system case. 3.M1 is safety ground. For better EMC
performance,Please secure an electrical connection between M1,M2,M3,and chassis grounding.
DC Output Connector (CN2) : JST B2P-VH or equivalent
Pin No. 1 2
Assignment +V -V
Mating Housing
Terminal
JST VHR JST SVH-21T-P1.1
or equivalent
or equivalent
: Grounding Required
fosc : 90KHz(115VAC) 120KHz(230VAC)
RECTIFIERS
+V
& FILTER
-V
DETECTION CIRCUIT
O.V.P.
O.C.P.
Static Characteristics
100
80
60 50 40
20
-30 -25 -5
0
20
40
50
60 70 (HORIZONTAL)
AMBIENT TEMPERATURE ()
100 90 80 70 60 50 40
90 100 125 135 145 155 165 175 180 200 230 264
INPUT VOLTAGE (V) 60Hz
File Name:PLP-45-SPEC 2022-08-04
LOAD (%) LOAD (%)
Downloaded from Arrow.com.
PF
EFFICIENCY (%)
45W Single Output LED Power Supply
PLP-45 series
Power Factor Characteristic
1 .0 0 0 .9 8 0 .9 6 0 .9 4 0 .9 2 0 .9 0 0 .8 8 0 .8 6 0 .8 4 0 .8 2 0 .8 0 0 .7 8
50%
Constant Current Mode
60%
70%
80%
LOAD
90%
100% (45W)
230V 115V
EFFICIENCY vs LOAD (48V Model)
PLP-45 series possess superior working efficiency that up to 89% can be reached in field applications.
94 92 90 88 86 84 82 80 78 76 74 72 70 68 66 64 62 60 58
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
230V 115V
LOAD
DRIVING METHODS OF LED MODULE
This LED power supply is suggested to work in constant current mode area (CC) to drive the LEDs.
Vo(%)
100
75 (min.)
Constant Current area
In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. Should there be any compatibility issues, please contact MEAN WELL.
Hiccup Protection
50
100
Io (%)
Typical LED power supply I-V curve
Downloaded from Arrow.com.
File Name:PLP-45-SPEC 2022-08-04