Home | DrayTek
MyVigor - DrayTekHome | DrayTek
User Guide for DrayTek models including: Vigor130 VDSL2 ADSL2 2 Modem, Vigor130, VDSL2 ADSL2 2 Modem, ADSL2 2 Modem, Modem
iv EU Declaration of Conformity We DrayTek Corp. , office at No.26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan R.O.C., declare under our sole responsibility that the product
Quick Start Guide | DrayTek
File Info : application/pdf, 16 Pages, 430.20KB
DocumentDocumenti Vi gor 1 3 0 VDSL2/ ADSL2/ 2+ Modem Quick Start Guide Version: 2. 0 Firmware Version: V3. 8. 5 (For future update, please visit DrayTek web site) Date: June 2, 2022 ii Intellectual Property Rights (IPR) Information Copyrights Trademarks © All right s reserved. This publicat ion cont ains inf ormat ion t hat is prot ect ed by copyright . No part may be reproduced, t ransmit t ed, t ranscribed, st ored in a ret rieval syst em, or t ranslat ed int o any language wit hout writ t en permission f rom t he copyright holders. The f ollowing t rademarks are used in t his document : Microsof t is a regist ered t rademark of Microsof t Corp. Windows 7, 8 and Explorer are t rademarks of Microsof t Corp. Apple and Mac OS are regist ered t rademarks of Apple Inc. Ot her product s may be t rademarks or regist ered t rademarks of t heir respect ive manuf act urers. Safety Instructions and Approval Safety Instructions Read t he inst allat ion guide t horoughly bef ore you set up t he rout er. The rout er is a complicat ed elect ronic unit t hat may be repaired only be aut horized and qualif ied personnel. Do not t ry t o open or repair t he rout er yourself . Do not place t he rout er in a damp or humid place, e. g. a bat hroom. Do not st ack t he rout ers. The rout er should be used in a shelt ered area, wit hin a t emperat ure range of 0 t o +45 Celsius. Do not expose t he rout er t o direct sunlight or ot her heat sources. The housing and elect ronic component s may be damaged by direct sunlight or heat sources. Do not deploy t he cable f or LAN connect ion out door t o prevent elect ronic shock hazards. Keep t he package out of reach of children. When you want t o dispose of t he rout er, please f ollow local regulat ions on conservat ion of t he environment . Warranty We warrant t o t he original end user (purchaser) t hat t he rout er will be f ree f rom any def ect s in workmanship or mat erials f or a period of t wo (2) years f rom t he dat e of purchase f rom t he dealer. Please keep your purchase receipt in a saf e place as it serves as proof of dat e of purchase. During t he warrant y period, and upon proof of purchase, should t he product have indicat ions of f ailure due t o f ault y workmanship and/ or mat erials, we will, at our discret ion, repair or replace t he def ect ive product s or component s, wit hout charge f or eit her part s or labor, t o what ever ext ent we deem necessary t ore-st ore t he product t o proper operat ing condit ion. Any replacement will consist of a new or re-manuf act ured f unct ionally equivalent product of equal value, and will be of f ered solely at our discret ion. This warrant y will not apply if t he product is modif ied, misused, t ampered wit h, damaged by an act of God, or subj ect ed t o abnormal working condit ions. The warrant y does not cover t he bundled or licensed sof t ware of ot her vendors. Def ect s which do not signif icant ly af f ect t he usabilit y of t he product will not be covered by t he warrant y. We reserve t he right t o revise t he manual and online document at ion and t o make changes f rom t ime t o t ime in t he cont ent s hereof wit hout obligat ion t o not if y any person of such revision or changes. iii EU Declaration of Conformity We DrayTek Corp. , office at No.26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan R.O.C., declare under our sole responsibility that the product Product name: ADSL2/2+ & VDSL2 Router Model number: Vigor130 Manufacturer: DrayTek Corp. Address: No.26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan is in conformity with the relevant Union harmonisation legislation: EMC Directive 2014/30/EU , Low Voltage Directive 2014/35/EU , ErP 2009/125/EC and RoHS 2011/65/EU with reference to the following standards EN 55032 EN 61000-3-2 EN 61000-3-3 EN 55024 EN 60950-1 Standard EC No. 1275/2008 Version / Issue date 2012+AC:2013 class B 2014 Class A 2013 2010+A1:2015 2006 +A11:2009 +A1:2010 +A12:2011+ A2:2013 2008 Hsinchu (place) 22nd June, 2017 (date) Calvin Ma / President . (Legal Signature) iv Regulatory Information This equipment has been t est ed and f ound t o comply wit h t he limit s f or a Class B digit al device, pursuant t o Part 15 of t he FCC Rules. These limit s are designed t o provide reasonable prot ect ion against harmf ul int erf erence in a resident ial inst allat ion. This equipment generat es, uses and can radiat e radio f requency energy and, if not inst alled and used in accordance wit h t he inst ruct ions, may cause harmf ul int erf erence t o radio communicat ions. However, t here is no guarant ee t hat int erf erence will not occur in a part icular inst allat ion. If t his equipment does cause harmf ul int erf erence t o radio or t elevision recept ion, which can be det ermined by t urning t he equipment of f and on, t he user is encouraged t o t ry t o correct t he int erf erence by one of t he f ollowing measures: Reorient or relocat e t he receiving ant enna. Increase t he separat ion bet ween t he equipment and receiver. Connect t he equipment int o an out let on a circuit dif f erent f rom t hat t o which t he receiver is connect ed. Consult t he dealer or an experienced radio/ TV t echnician f or help. This device complies wit h Part 15 of t he FCC Rules. Operat ion is subj ect t o t he f ollowing t wo condit ions: (1) This device may not cause harmf ul int erf erence, and (2) This device may accept any int erf erence received, including int erf erence t hat may cause undesired operat ion. DrayTek Vigor130 is compliant wit h 47 C. F. R. Part 68. More updat e, please visit www. drayt ek. com. v Table of Contents 1. Package Content .................................................................................................. 1 2. Panel Explanation................................................................................................. 2 3. Hardware Installation ........................................................................................... 3 3.1 Network Connection ................................................................................................................... 3 3.2 Wall-Mounted Installation ........................................................................................................... 4 4. Software Configuration ........................................................................................ 5 6. Customer Service ............................................................................................... 10 vi 1. Package Content Take a look at t he package cont ent . If t here is anyt hing missed or damaged, please cont act DrayTek or dealer immediat ely. Vigor router Quick Start Guide RJ-45 Cable (Ethernet) RJ-11 to RJ-11 Cable (Annex A) RJ-11 to RJ-45 Cable (Annex B) RJ-45 to RJ-45 Cable (Annex B) The t ype of t he power adapt er depends on t he count ry t hat t he rout er will be inst alled. UK-type Power Adapter EU-type Power Adapter USA/Taiwan-type Power Adapter AU/NZ-type Power Adapter 1 2. Panel Explanation LED ACT LAN DoS DSL Status Of f Bl i nki ng On Of f Bl i nki ng On Bl i nki ng On Bl i nki ng Explanation The syst em is not ready or is f ailed. The syst em is ready and can work normally. A normal connect ion is t hrough it s corresponding port . LAN is disconnect ed. Dat a is t ransmit t ing (sending/ receiving). The DoS/ DDoS f unct ion is act ive. It will blink while det ect ing an at t ack. DSL connect ion synchronized. DSL connect ion is synchronizing. Interface DSL LAN Fact ory Reset Description Connect er f or accessing t he Int ernet t hrough VDSL2/ ADSL2/ 2+. Connect er f or local net worked devices. Rest ore t he def ault set t ings. Usage: Turn on t he modem. Press t he but t on and keep f or more t han 10 seconds. Then t he modem will rest art wit h t he f act ory def ault conf igurat ion. ON/ OFF: Power swit ch. Connect er f or a power adapt er. 2 3. Hardw are Installation This sect ion will guide you t o inst all t he modem t hrough hardware connect ion and conf igure t he modem' s set t ings t hrough web browser. 3.1 Netw ork Connection Bef ore st art ing t o conf igure t he modem, you have t o connect your devices correct ly. 1. Connect t he DSL int erf ace t o t he MODEM port of ext ernal split t er wit h a DSL line cable. (split t er) 2. Connect t he LAN port t o your comput er wit h a RJ-45 cable. 3. Connect one end of t he power adapt er t o t he Power port of t his device. Connect t he ot her end t o t he wall out let of elect ricit y. 4. Power on t he modem. 5. Check t he POWER, ACT, LAN, DSL and INTERNET LEDs t o assure net work connect ions. (For t he det ailed inf ormat ion of LED st at us, please ref er t o sect ion 2. ) 3 3 .2 Wa ll-M ount e d I nst a lla t ion Vigor130 has keyhole t ype mount ing slot s on t he underside. 1. A t emplat e is provided on t he Vigor130 packaging box t o enable you t o space t he screws correct ly on t he wall. 2. Place t he t emplat e on t he wall and drill t he holes according t o t he recommended inst ruct ion. 3. Fit screws int o t he wall using t he appropriat e t ype of wall plug. Not e The recommended drill diamet er shall be 6. 5mm (1/ 4" ). 4. When you f inished about procedure, t he rout er has been mount ed on t he wall f irmly. 4 4. Softw are Configuration To access Int ernet , please f inish basic conf igurat ion af t er complet ing t he hardware inst allat ion. The Quick Start Wizard is designed f or you t o easily set up your rout er f or Int ernet access. You can direct ly access t he Quick Start Wizard via Web Conf igurat or. Make sure your PC connect s t o t he rout er correct ly. Not e You may eit her simply set up your comput er t o get IP dynamically f rom t he rout er or set up t he IP address of t he comput er t o be t he same subnet as the default IP address of Vigor router 192. 168. 1. 1. For t he det ailed inf ormat ion, please ref er t o t he sect ion - Trouble Shoot ing in t he User' s Guide. Open a web browser on your PC and t ype http:/ / 192. 168. 1. 1. A pop-up window will open t o ask f or username and password. Please t ype " admin/ admin" as t he Username/ Password and click Login. 5 Now, t he Main Screen will pop up. Click Wizards>>Quick Start Wizard. Not e The home page will change slight ly in accordance wit h t he rout er you have. The f irst screen of Quick Start Wizard is ent ering login password. Af t er t yping t he password, please click Next. On t he next page, please select t he WAN int erf ace (at present , only WAN1 is available) t hat you use and specif y t he DSL mode. 6 On t he next page, please select t he appropriat e prot ocol according to the information from your ISP. For example, you should select PPPoE mode if t he ISP provides you PPPoE int erf ace. PPPoE / PPPoA 1. Choose WAN1 as WAN Int erf ace and click t he Next but t on; you will get t he f ollowing page. Choose PPPoE / PPPoA as t he prot ocol. Encapsulat ion f or PPPoE/ PPoA cont ains PPPoE and PPoA; encapsulat ion f or MPoA/ St at ic or Dynamic IP cont ains 1483 Bridged IP and 1483 Rout ed IP. 7 2. Af t er f inished t he above set t ings, simply click Next. 3. Please manually ent er t he Username/ Password provided by your ISP. Then click Next f or viewing summary of such connect ion. 4. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, t he syst em st at us of t his prot ocol will be shown. 5. Now, you can enj oy surf ing on t he Int ernet . 8 MPoA / Static or Dynamic IP 1. Choose WAN1 as WAN Int erf ace and click t he Next but t on; you will get t he f ollowing page. Choose MPoA / Static or Dynamic IP as t he prot ocol. 2. Please t ype in t he IP address/ mask/ gat eway inf ormat ion originally provided by your ISP. Then click Next f or viewing summary of such connect ion. 3. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, t he syst em st at us of t his prot ocol will be shown. 4. Now, you can enj oy surf ing on t he Int ernet . 9 6. Customer Service If t he modem st ill cannot work correct ly af t er t rying many ef f ort s, please cont act your dealer f or f urt her help right away. For any quest ions, please f eel f ree t o send e-mail t o support @drayt ek. com. Be a Registered Owner Web regist rat ion is pref erred. You can regist er your Vigor rout er via ht t ps: / / myvigor. drayt ek. com. Firmware & Tools Updates Due t o t he cont inuous evolut ion of DrayTek t echnology, all rout ers will be regularly upgraded. Please consult t he DrayTek web sit e f or more inf ormat ion on newest f irmware, t ools and document s. ht t ps: / / www. drayt ek. com 10