Instructions for MINCO models including: S207595 Non-Sparking Temperature Detectors, S207595, Non-Sparking Temperature Detectors, Temperature Detectors, Detectors

[PDF] Non-Sparking Temperature Detectors II 3 G Ex nA IIC T3…T6 Gc IECEx ...www.minco.com › uploads › SPI-0...

Non-Sparking Temperature Detectors II 3 G Ex nA IIC T3… ...

4 pages


File Info : application/pdf, 4 Pages, 295.02KB

PDF preview unavailable. Download the PDF instead.

SPI-00-1240-Rev-G-English-Korean
Instructions: Non-Sparking Temperature Detectors II 3 G Ex nA IIC T3...T6 Gc
IECEx Ex nA IIC T3...T6 Gc ISA Class I Zone 2 AEx nA IIC T6
SPI 00-1240 Rev. G (Document 1496454)
1. Description
These temperature detectors are designed to be installed in babbitt style bearing shoes. Operating temperature range -50°C to 200°C. S___ models are available for 2-, 3-, or 4-wire measurement circuits and with single or dual resistance temperature detector (RTD) elements. TC___ models are available with single or dual thermocouple elements.
2. Attestation of Conformity
This Attestation of Conformity is issued under the sole responsibility of the manufacturer. Temperature Detector Type: S207595, S207596, S207597, S207598, TC207600, TC207601, TC207602, TC207603. The product defined above is in conformity with the following relevant legislation: ATEX Directive 2014/34/EU EN 60079-0:2012* Explosive atmospheres - Part 0: Equipment - General requirements EN 60079-15:2010 Explosive atmospheres - Part 15: Equipment protection by type of protection "n" IEC 60079-0:2011-06* Explosive atmospheres - Part 0: Equipment - General requirements IEC 60079-15:2010-01* Explosive atmospheres - Part 15: Equipment protection by type of protection "n" Korea Ministry of Employment and Labor Notice No. 2013-54 (KCs Certificate No. 17-KA4BO-0017X)
*NOTE: The harmonized standard EN IEC 60079-0:2018 has been compared to the standard used for certification purposes and no changes in the "state of the art" apply to the product. The standards IEC 60079-0:2017/COR1:2020 and IEC 60079-7:2015+AMD1:2017 CSV have been compared to the standards used for certification purposes and no changes in the "state of the art" apply to the product.
Certificate DEKRA IECEx DEK 11.0001X Certificate DEKRA 14ATEX0008 X DEKRA Certification B.V. Meander 1051 6825 MJ Arnhem The Netherlands
06 Mar 2023 Rob Bohland, Ex Authorized Person Minco Products, Inc 7300 Commerce Lane Minneapolis, MN 55432 USA
page 1 of 2 | © 2023 Minco | SPI 00-1240 Rev. G (Document 1496454) | minco.com

3. Installation Instructions
The installation of the temperature detector in a bearing completes the enclosure and provides the protection from mechanical impact. A separate installation instruction is included with each shipment. If lost, a copy can be downloaded from the Minco website (www.minco.com/support). The instruction(s) for each model is as follows:
S207595, TC207600: EI 164 Installing Case Style "A" Sensors in Sleeve Bearings, or EI 167 Installing Case Style "A" Sensors in Thrust Bearings.
S207596, TC207601, S207598, TC207603: EI 180 Installing Case Style "B" Sensors in Thrust Bearings (Babbitt), or EI 181 Installing Case Style "B" Sensors in Thrust Bearings (Spring and Ring).
S207597, TC207602: EI 184 Installing Case Style "C" and "D" Sensors in Bearing Shoes.

4. Electrical Data
Electrical data for S___ models only: Measuring current:  1 mA Power (under fault conditions):  0.45 W

5. Special Conditions of Use
The Temperature Detectors shall be installed in a suitable enclosure providing a degree of protection of at least IP54 according to EN 60529, taking into account the environmental conditions under which the equipment will be used.

6. Electrical Connections

S______ models:

2-lead

3-lead

4-lead

white red white red (2) white (2) red (2) single element models
yellow black yellow black (2) yellow (2) black (2) dual element models (additional)

TC_______ models:

Type E

Type J

Type K

Type T

purple red white red yellow red blue red

7. Marking Example

page 2 of 2 | © 2023 Minco | SPI 00-1240 Rev. G (Document 1496454) | minco.com

:    II 3 G Ex nA IIC T3...T6 Gc
IECEx Ex nA IIC T3...T6 Gc ISA  I  2 AEx nA IIC T6
 1496454   G (SPI 00-1240)
1. 
        .    -50°C ~ 200°C. S___  2, 3  4     /   (RTD)  . TC___       .
2.  
       .   : S207595, S207596, S207597, S207598, TC207600, TC207601, TC207602, TC207603.       . ATEX  2014/34/EU EN 60079-0:2012   -  0:  -   EN 60079-15:2010   -  15: "n"      IEC 60079-0:2011-06   -  0:  -   IEC 60079-15:2010-01   -  15: "n"      ISA 60079-0:2009   -  0:  -   ISA 60079-15:2012   -  15: "n"        2013-54 (KCs   17-KA4BO-0017X)
 DEKRA IECEx DEK 11.0001X  DEKRA 14ATEX0008 X DEKRA  B.V. Meander 1051 6825 MJ Arnhem 
2022  06  29  Rob Bohland, Ex   Minco Products, Inc 7300 Commerce Lane Minneapolis, MN 55432 USA
1 / 2 | © 2023 Minco |  1496454   G | minco.com

3.  
           .      .  , Minco  (www.minco.com/support)    .     .
S207595, TC207600: EI 164     "A"  ,  EI 167     "A"  .
S207596, TC207601, S207598, TC207603: EI 180  ()   "B"  ,  EI 181  (  )   "B"  .
S207597, TC207602: EI 184     "C"  "D"  .

4.  
S___    :  :  1 mA ( ):  0.45 W

5.   
       EN 60529    IP54        .

6.  

S______ :

2-lead

33--lead

44--lead

white red white red(2()2) white(2(2) ) red (2()2) single elementmodels yellow black yellow black((22)) yellow((22)) black(2(2)) dual elementmod(els )
(additional)

TC_______ :

Type EE

Type JJ

TypeKK

TypeTT

purple red white red yellow red blue red

7.  

2 / 2 | © 2023 Minco |  1496454   G | minco.com



References

Bluebeam Brewery 5.0 Bluebeam Stapler 10.2.2