Whyte Technologies – Digital innovation made easy
Instruction Manual for Whyte Technologies models including: WT51-10WB, WT51-20WB, WT52-10WB, 5 Wire WB Tap Splitter, WB Tap Splitter, Tap Splitter, WT51-10WB, Splitter
GENERAL DESCRIPTION. Whyte Series 5 WB Taps & Splitters are a range of 5 wire passive devices that distribute IF and Terrestrial Signals. The range includes 1 way, 2 way and 3
Series 5WB WT51-20WB – Whyte Technologies
File Info : application/pdf, 14 Pages, 3.53MB
DocumentDocument5 WIRE WB TAP & SPLITTER INSTRUCTION MANUAL WT51-10WB | WT51-20WB | WT52-10WB WT52-20WB | WT53-10WB | WS52-05WB www.whytetechnologies.com In the interest of continuous improvement, all specifications of products within this brochure are subject to change without notice. CONTENTS Safety 3 Precautions 3 Guarantee 3 General Description 4 Technical Description 5 Installation Instructions 6 Example Configuration 9 Specifications 11 2 SAFETY The Multiswitches are intended for indoor use only. Do not install the Multiswitch in damp, humid, hot or dusty areas. Switch off and remove the power supply when making connections to the Multiswitch to avoid damaging the unit. Always earth bond the Multiswitch using the Earth Bonding Lug and/or the Earth Terminal Bars to a suitable earth bonding point using minimum 4mm² diameter earth cable. PRECAUTIONS To ensure trouble free operation: Do not remove the cover of the Multiswitch or disassemble it as this will invalidate the guarantee. The female F connectors on this unit were designed for use with '100' type coaxial cable with a centre core diameter of 1mm². When using larger CT125 or CT167 cables, you must ensure that suitable F connectors with reducing pins are used otherwise damage to the unit will occur which will invalidate the guarantee. Do not over tighten the F connectors (finger tight only). GUARANTEE All Whyte products are guaranteed for a period of 4 years from the date of purchase against defects. Within this guarantee period, Whyte Technologies will repair or replace the faulty product. In the unlikely event, please return any faulty products to your dealer. The Guarantee will be deemed as void if the serial number on the product is removed, damaged or illegible. The Guarantee excludes defects caused by incorrect use, accidental damage, disassembly, water/fire/lightning damage or lack of ventilation. 3 GENERAL DESCRIPTION Whyte Series 5 WB Taps & Splitters are a range of 5 wire passive devices that distribute IF and Terrestrial Signals. The range includes 1 way, 2 way and 3 way Taps with either 10dB or 20dB tap-offs and a 2 way Splitter with 2 x 4dB tap-offs. The Series 5 WB range of taps and splitters now feature Intelligent Equalisation Technology for flat trunk output. This industry first enables longer cascades to be created in both conventional and wideband IRS distribution. For ease of installation, each Tap & Splitter is designed to push interface with all Series 5 WB and Series 5 IRS distribution equipment. An LED indicates the presence of power in any of the SAT Trunk Lines or at the DC Input. TECHNICAL DESCRIPTION Whyte Series 5 WB Taps and Splitters are DC passing on all SAT Trunk Lines. The Terrestrial Tap Lines are isolated. An Auxiliary 18V Input is provided on all WB Taps and Splitters which enables a Whyte Power Supply Unit to be conveniently connected anywhere on the system. The Auxiliary Input injects 18V DC on all SAT trunk lines upwards and downwards. Whyte Series 5 WB Taps and splitters can be coupled together to create a multitude of conventional 5 wire distribution combinations. These wideband Taps and Splitter also provide a compact solution for dual wideband satellite feed systems. 4 EXAMPLE 5 WIRE 4-WAY SPLITTER WT52-10WB + WS52-05WB EXAMPLE 5 WIRE 5-WAY SPLITTER WT52-10WB + WT52-10WB 2x Outputs 10dB Loss QUICK FIT COUPLERS 2x Outputs 13dB Loss 2x Outputs 7dB Loss 1x Outputs 6dB Loss 5 INSTALLATION INSTRUCTIONS MOUNTING THE LAUNCH AMPLIFIER Select a suitable location to install the Launch Amplifier. Do not install the Launch Amplifier in damp, humid, hot or dusty areas. Using the screw slots on the Corner Brackets, secure the Multiswitch using the appropriate fixing screws and wall plugs to suit the relevant wall surface or cabinet. CONNECTING THE SAT & TERR INPUT CABLES Use a suitably sized Satellite Dish to provide adequate signal levels from the satellite being received. Ensure that the Satellite Drop Cables are connected correctly in the corresponding order with respect to the LNB and the Launch Amplifier SAT inputs. Ensure that the F Connectors are properly sealed against water ingress. If a Composite Cable (multi core coaxial cable) has been used, ensure that the outer jacket is not facing upwards and cannot collect rain water. Check the Terrestrial Drop Cable and ensure that this has also been sealed against water ingress. If a Triplexer has been used to combine the FM and DAB aerials with the UHF Terrestrial Aerial, ensure that this is also water tight. Ensure that all drop cables have drip loops prior to their entering the building. Connect the SAT and TERR drop cables to the corresponding Satellite & TERR Inputs of the Launch Amplifier. 6 EARTH BONDING Earth bond the Launch Amplifier to the Earth Bonding Lug and/or to the Earth Terminal Bar using minimum 4mm² Earth Bonding Cable. It is best practise to earth bond across the Earth Bars of all components within a single IRS System using a single unbroken Earth Bonding Wire. To achieve this, strip away 3cm of the insulation of a length of 4mm² Earth Bonding Wire. See Figure 1. Unscrew the Earth Bolt on the Earth Terminal Bar to provide enough clearance to wrap the Earth Bonding Wire around the Earth Bolt. See Figure 2. Tighten the Earth Bolt and route the Earth Bonding Wire to all other Earth Terminal Bars and terminate as detailed above. Make sure that the Earth Bonding Cable is connected directly to the building's PME. Figure 1 Figure 2 7 CONNECTING THE POWER SUPPLY UNIT (PSU) Calculate the total current consumption of the Launch Amplifiers, LNB and any Series 5WB Multiswitches that make up the complete IRS System. The current consumption of the Series 5WB Launch Amplifier range can be found in the Specification section of this manual. If in doubt, assume the current consumption of each LNB to be 200mA max (0.2A). Connect a suitable Whyte PSU to the Auxiliary 18V DC Input. If more than one PSU is required, the additional PSU(s) may be connected to any other Multi switch, Launch Amplifier, Tap or Splitter within the system. When all connections have been made, connect the PSU to a 240V socket to power up the IRS System. It is highly advisable to isolate and hence divide the system in to DC Groups containing only a single PSU per group, by using F-type DC blockers (not supplied). 8 EXAMPLE CONFIGURATION Quattro Hybird IRS System WPSU-2.5A WATS-530WB WSCR504 WM516 WSCR508 WM508 REC 2 REC 4 WB Q HH V Sat B H ON DC 12V OFF WSCR504 4 Way dSCR Multiswitch 87 ~ 790MHz 52 ~ 102dBV 101dBV 8dB ±2dB - 5dB Terrestrial 0.1A / 0.15A Sky UK- EN50607 - EN50494 Flashing Green Solid Green HH Frequency Min/Max Input Max Output Gain Trunk Loss Max VH SCR Mode Legacy Mode VH TERR TERR Gain TM TERR 0 dB -10dB -20dB TERR WB LNB Q HL V Sat A H SAT dSCR / Legacy Frequency 290 ~ 2340MHz Min/Max Input 64 ~ 104dBV 89dBV Gain (AGC) -5dB ~ +25dB - 5dB Consumption Min / Max @ 18V HL Compatibility LED Status VL Output (AGC) REC 3 Trunk Loss Max VL REC 1 DC IN 18V WT52-20WB WM516 REC 1 VL HL V Sat A H WB LNB Q TERR VH HH Q V Sat B H WB ON DC 12V OFF WSCR508 8 Way dSCR Multiswitch REC 2 TERR Gain REC 3 REC 4 REC 5 SAT dSCR / Legacy Frequency 290 ~ 2340MHz Min/Max Input 64 ~ 104dBV Output (AGC) 89dBV Gain (AGC) -5dB ~ +25dB REC 7 Trunk Loss Max - 5dB Consumption Min / Max @ 18V Compatibility LED Status DC IN 18V VL HL TM TERR 0 dB -10dB REC 6 -20dB Terrestrial Frequency 87 ~ 790MHz Min/Max Input 52 ~ 102dBV Max Output 90dBV Gain 8dB ±2dB Trunk Loss Max - 5dB 0.1A / 0.15A Sky UK- EN50607 - EN50494 SCR Mode Legacy Mode Flashing Green Solid Green REC 8 TERR VH HH WSCR508 REC 1 VL HL V Sat A H WB LNB Q TERR VH HH Q V Sat B H WB ON DC 12V OFF WSCR508 8 Way dSCR Multiswitch REC 2 TERR Gain REC 3 REC 4 REC 5 SAT dSCR / Legacy Frequency 290 ~ 2340MHz Min/Max Input 64 ~ 104dBV Output (AGC) 89dBV Gain (AGC) -5dB ~ +25dB REC 7 Trunk Loss Max - 5dB Consumption Min / Max @ 18V Compatibility LED Status DC IN 18V VL HL TM TERR 0 dB -10dB REC 6 -20dB Terrestrial Frequency 87 ~ 790MHz Min/Max Input 52 ~ 102dBV Max Output 90dBV Gain 8dB ±2dB Trunk Loss Max - 5dB 0.1A / 0.15A Sky UK- EN50607 - EN50494 SCR Mode Legacy Mode Flashing Green Solid Green REC 8 TERR VH HH DC Block WPSU-2.5A WT52-20WB WM512 WSCR506 WSCR504 WM508 REC 2 REC 4 WB Q HH V Sat B H ON DC 12V OFF WSCR504 4 Way dSCR Multiswitch 87 ~ 790MHz 52 ~ 102dBV 101dBV 8dB ±2dB - 5dB Terrestrial 0.1A / 0.15A Sky UK- EN50607 - EN50494 Flashing Green Solid Green HH Frequency Min/Max Input Max Output Gain Trunk Loss Max VH SCR Mode Legacy Mode VH TERR TERR Gain TM TERR 0 dB -10dB -20dB TERR WB LNB Q HL V Sat A H SAT dSCR / Legacy Frequency 290 ~ 2340MHz Min/Max Input 64 ~ 104dBV 89dBV Gain (AGC) -5dB ~ +25dB - 5dB Consumption Min / Max @ 18V HL Compatibility LED Status VL Output (AGC) REC 3 Trunk Loss Max VL REC 1 DC IN 18V Quick Fit Couplers WT52-10WB WSCR508 REC 1 VL HL V Sat A H WB LNB Q TERR VH HH Q V Sat B H WB ON DC 12V OFF WSCR506 6 Way dSCR Multiswitch REC 2 TERR Gain REC 3 REC 4 SAT dSCR / Legacy Frequency 290 ~ 2340MHz Min/Max Input 64 ~ 104dBV Output (AGC) 89dBV Gain (AGC) -5dB ~ +25dB Trunk Loss Max - 5dB Consumption Min / Max @ 18V Compatibility LED Status DC IN 18V VL HL TM TERR 0 dB -10dB REC 5 -20dB Terrestrial Frequency 87 ~ 790MHz Min/Max Input 52 ~ 102dBV Max Output 90dBV Gain 8dB ±2dB Trunk Loss Max - 5dB 0.1A / 0.15A Sky UK- EN50607 - EN50494 SCR Mode Legacy Mode Flashing Green Solid Green REC 6 TERR VH HH REC 1 VL HL V Sat A H WB LNB Q TERR VH HH Q V Sat B H WB ON DC 12V OFF WSCR508 8 Way dSCR Multiswitch REC 2 TERR Gain REC 3 REC 4 REC 5 SAT dSCR / Legacy Frequency 290 ~ 2340MHz Min/Max Input 64 ~ 104dBV Output (AGC) 89dBV Gain (AGC) -5dB ~ +25dB REC 7 Trunk Loss Max - 5dB Consumption Min / Max @ 18V Compatibility LED Status DC IN 18V VL HL TM TERR 0 dB -10dB REC 6 -20dB Terrestrial Frequency 87 ~ 790MHz Min/Max Input 52 ~ 102dBV Max Output 90dBV Gain 8dB ±2dB Trunk Loss Max - 5dB 0.1A / 0.15A Sky UK- EN50607 - EN50494 SCR Mode Legacy Mode Flashing Green Solid Green REC 8 TERR VH HH WM516 WSCR508 WM516 REC 2 REC 4 REC 6 REC 8 WB Q HH V Sat B H ON DC 12V OFF WSCR508 8 Way dSCR Multiswitch 87 ~ 790MHz Terrestrial Min/Max Input 52 ~ 102dBV 90dBV 8dB ±2dB - 5dB 0.1A / 0.15A Sky UK- EN50607 - EN50494 Flashing Green Solid Green HH Frequency VH Max Output Gain Trunk Loss Max SCR Mode Legacy Mode VH 0 dB -10dB -20dB TERR TERR Gain TM TERR TERR WB LNB Q HL V Sat A H SAT dSCR / Legacy Frequency 290 ~ 2340MHz Min/Max Input 64 ~ 104dBV 89dBV -5dB ~ +25dB - 5dB Consumption Min / Max @ 18V HL Compatibility LED Status VL Output (AGC) Gain (AGC) REC 7 Trunk Loss Max VL REC 1 REC 3 REC 5 DC IN 18V WT52-05WB 9 10 WT52-05WB REC 2 REC 4 REC 6 REC 8 REC 2 REC 4 REC 5 REC 6 WB WB Q Q HH V Sat B H ON DC 12V OFF WSCR508 8 Way dSCR Multiswitch 87 ~ 790MHz Terrestrial Min/Max Input 52 ~ 102dBV 90dBV 8dB ±2dB - 5dB 0.1A / 0.15A Sky UK- EN50607 - EN50494 Flashing Green Solid Green HH HH V Sat B H Frequency VH Max Output Gain Trunk Loss Max SCR Mode Legacy Mode ON DC 12V OFF WSCR506 6 Way dSCR Multiswitch 87 ~ 790MHz Terrestrial Min/Max Input 52 ~ 102dBV 90dBV 8dB ±2dB - 5dB 0.1A / 0.15A Sky UK- EN50607 - EN50494 Flashing Green Solid Green HH Frequency VH VH Max Output Gain Trunk Loss Max SCR Mode Legacy Mode VH 0 dB -10dB -20dB 0 dB -10dB -20dB TERR TERR Gain TM TERR TERR TERR TERR Gain TM TERR TERR WB LNB Q HL V Sat A H SAT dSCR / Legacy Frequency 290 ~ 2340MHz Min/Max Input 64 ~ 104dBV 89dBV Gain (AGC) -5dB ~ +25dB - 5dB Consumption Min / Max @ 18V WB LNB Q HL HL Compatibility LED Status V Sat A H SAT dSCR / Legacy Frequency 290 ~ 2340MHz Min/Max Input 64 ~ 104dBV 89dBV -5dB ~ +25dB - 5dB Consumption Min / Max @ 18V HL Compatibility LED Status VL Output (AGC) REC 7 Trunk Loss Max VL VL Output (AGC) Gain (AGC) Trunk Loss Max VL REC 1 REC 3 REC 5 DC IN 18V REC 1 REC 3 DC IN 18V WSCR506 WSCR508 WSCR506 WT52-10WB Quick Fit Couplers REC 1 VL HL V Sat A H WB LNB Q TERR VH HH Q V Sat B H WB ON DC 12V OFF WSCR508 8 Way dSCR Multiswitch REC 2 TERR Gain REC 3 REC 4 REC 5 SAT dSCR / Legacy Frequency 290 ~ 2340MHz Min/Max Input 64 ~ 104dBV Output (AGC) 89dBV Gain (AGC) -5dB ~ +25dB REC 7 Trunk Loss Max - 5dB Consumption Min / Max @ 18V Compatibility LED Status DC IN 18V VL HL TM TERR 0 dB -10dB REC 6 -20dB Terrestrial Frequency 87 ~ 790MHz Min/Max Input 52 ~ 102dBV Max Output 90dBV Gain 8dB ±2dB Trunk Loss Max - 5dB 0.1A / 0.15A Sky UK- EN50607 - EN50494 SCR Mode Legacy Mode Flashing Green Solid Green REC 8 TERR VH HH REC 1 VL HL V Sat A H WB LNB Q TERR VH HH Q V Sat B H WB ON DC 12V OFF WSCR506 6 Way dSCR Multiswitch REC 2 TERR Gain REC 3 REC 4 SAT dSCR / Legacy Frequency 290 ~ 2340MHz Min/Max Input 64 ~ 104dBV Output (AGC) 89dBV Gain (AGC) -5dB ~ +25dB Trunk Loss Max - 5dB Consumption Min / Max @ 18V Compatibility LED Status DC IN 18V VL HL TM TERR 0 dB -10dB REC 5 -20dB Terrestrial Frequency 87 ~ 790MHz Min/Max Input 52 ~ 102dBV Max Output 90dBV Gain 8dB ±2dB Trunk Loss Max - 5dB 0.1A / 0.15A Sky UK- EN50607 - EN50494 SCR Mode Legacy Mode Flashing Green Solid Green REC 6 TERR VH HH WSCR508 REC 1 VL HL V Sat A H WB LNB Q TERR VH HH Q V Sat B H WB ON DC 12V OFF WSCR506 6 Way dSCR Multiswitch REC 2 TERR Gain REC 3 REC 4 SAT dSCR / Legacy Frequency 290 ~ 2340MHz Min/Max Input 64 ~ 104dBV Output (AGC) 89dBV Gain (AGC) -5dB ~ +25dB Trunk Loss Max - 5dB Consumption Min / Max @ 18V Compatibility LED Status DC IN 18V VL HL TM TERR 0 dB -10dB REC 5 -20dB Terrestrial Frequency 87 ~ 790MHz Min/Max Input 52 ~ 102dBV Max Output 90dBV Gain 8dB ±2dB Trunk Loss Max - 5dB 0.1A / 0.15A Sky UK- EN50607 - EN50494 SCR Mode Legacy Mode Flashing Green Solid Green REC 6 TERR VH HH REC 1 VL HL V Sat A H WB LNB Q TERR VH HH Q V Sat B H WB ON DC 12V OFF WSCR506 6 Way dSCR Multiswitch REC 2 TERR Gain REC 3 REC 4 SAT dSCR / Legacy Frequency 290 ~ 2340MHz Min/Max Input 64 ~ 104dBV Output (AGC) 89dBV Gain (AGC) -5dB ~ +25dB Trunk Loss Max - 5dB Consumption Min / Max @ 18V Compatibility LED Status DC IN 18V VL HL TM TERR 0 dB -10dB REC 5 -20dB Terrestrial Frequency 87 ~ 790MHz Min/Max Input 52 ~ 102dBV Max Output 90dBV Gain 8dB ±2dB Trunk Loss Max - 5dB 0.1A / 0.15A Sky UK- EN50607 - EN50494 SCR Mode Legacy Mode Flashing Green Solid Green REC 6 TERR VH HH REC 2 REC 4 REC 2 REC 4 REC 5 REC 6 WB WB Q Q HH V Sat B H ON DC 12V OFF WSCR504 4 Way dSCR Multiswitch 87 ~ 790MHz 52 ~ 102dBV 101dBV 8dB ±2dB - 5dB Terrestrial 0.1A / 0.15A Sky UK- EN50607 - EN50494 Flashing Green Solid Green HH HH Frequency Min/Max Input Max Output Gain Trunk Loss Max V Sat B H VH SCR Mode Legacy Mode ON DC 12V OFF WSCR506 6 Way dSCR Multiswitch 87 ~ 790MHz Terrestrial Min/Max Input 52 ~ 102dBV 90dBV 8dB ±2dB - 5dB 0.1A / 0.15A Sky UK- EN50607 - EN50494 Flashing Green Solid Green HH Frequency VH VH Max Output Gain Trunk Loss Max SCR Mode Legacy Mode VH TERR TERR Gain TM TERR 0 dB -10dB -20dB 0 dB -10dB -20dB TERR TERR TERR Gain TM TERR TERR WB LNB Q HL V Sat A H SAT dSCR / Legacy Frequency 290 ~ 2340MHz Min/Max Input 64 ~ 104dBV 89dBV Gain (AGC) -5dB ~ +25dB - 5dB Consumption Min / Max @ 18V WB LNB Q HL HL Compatibility LED Status V Sat A H SAT dSCR / Legacy Frequency 290 ~ 2340MHz Min/Max Input 64 ~ 104dBV 89dBV Gain (AGC) -5dB ~ +25dB - 5dB Consumption Min / Max @ 18V HL Compatibility LED Status VL Output (AGC) REC 3 Trunk Loss Max VL VL Output (AGC) Trunk Loss Max VL REC 1 DC IN 18V REC 1 REC 3 DC IN 18V WSCR506 WT52-20WB WSCR506 WSCR504 WSCR506 WPSU-2.5A DC Block REC 2 REC 4 REC 2 REC 4 REC 5 REC 6 WB WB Q Q HH V Sat B H ON DC 12V OFF WSCR504 4 Way dSCR Multiswitch 87 ~ 790MHz 52 ~ 102dBV 101dBV 8dB ±2dB - 5dB Terrestrial 0.1A / 0.15A Sky UK- EN50607 - EN50494 Flashing Green Solid Green HH HH Frequency Min/Max Input Max Output Gain Trunk Loss Max V Sat B H VH SCR Mode Legacy Mode ON DC 12V OFF WSCR506 6 Way dSCR Multiswitch 87 ~ 790MHz Terrestrial Min/Max Input 52 ~ 102dBV 90dBV 8dB ±2dB - 5dB 0.1A / 0.15A Sky UK- EN50607 - EN50494 Flashing Green Solid Green HH Frequency VH VH Max Output Gain Trunk Loss Max SCR Mode Legacy Mode VH TERR TERR Gain TM TERR 0 dB -10dB -20dB 0 dB -10dB -20dB TERR TERR TERR Gain TM TERR TERR WB LNB Q HL V Sat A H SAT dSCR / Legacy Frequency 290 ~ 2340MHz Min/Max Input 64 ~ 104dBV 89dBV Gain (AGC) -5dB ~ +25dB - 5dB Consumption Min / Max @ 18V WB LNB Q HL HL Compatibility LED Status V Sat A H SAT dSCR / Legacy Frequency 290 ~ 2340MHz Min/Max Input 64 ~ 104dBV 89dBV Gain (AGC) -5dB ~ +25dB - 5dB Consumption Min / Max @ 18V HL Compatibility LED Status VL Output (AGC) REC 3 Trunk Loss Max VL VL Output (AGC) Trunk Loss Max VL REC 1 DC IN 18V REC 1 REC 3 DC IN 18V WSCR506 WT52-20WB WSCR504 WSCR504 WSCR506 REC 1 VL HL V Sat A H WB LNB Q TERR VH HH Q V Sat B H WB ON DC 12V OFF WSCR504 4 Way dSCR Multiswitch REC 2 SAT dSCR / Legacy Frequency 290 ~ 2340MHz Min/Max Input 64 ~ 104dBV Output (AGC) 89dBV Gain (AGC) -5dB ~ +25dB REC 3 Trunk Loss Max - 5dB Consumption Min / Max @ 18V Compatibility LED Status DC IN 18V VL HL Terrestrial TERR Gain Frequency Min/Max Input 87 ~ 790MHz 52 ~ 102dBV TM TERR Max Output Gain 101dBV 8dB ±2dB 0 dB -10dB -20dB Trunk Loss Max - 5dB 0.1A / 0.15A Sky UK- EN50607 - EN50494 SCR Mode Legacy Mode Flashing Green Solid Green REC 4 TERR VH HH REC 1 VL HL V Sat A H WB LNB Q TERR VH HH Q V Sat B H WB ON DC 12V OFF WSCR506 6 Way dSCR Multiswitch REC 2 TERR Gain REC 3 REC 4 SAT dSCR / Legacy Frequency 290 ~ 2340MHz Min/Max Input 64 ~ 104dBV Output (AGC) 89dBV Gain (AGC) -5dB ~ +25dB Trunk Loss Max - 5dB Consumption Min / Max @ 18V Compatibility LED Status DC IN 18V VL HL TM TERR 0 dB -10dB REC 5 -20dB Terrestrial Frequency 87 ~ 790MHz Min/Max Input 52 ~ 102dBV Max Output 90dBV Gain 8dB ±2dB Trunk Loss Max - 5dB 0.1A / 0.15A Sky UK- EN50607 - EN50494 SCR Mode Legacy Mode Flashing Green Solid Green REC 6 TERR VH HH REC 1 VL HL V Sat A H WB LNB Q TERR VH HH Q V Sat B H WB ON DC 12V OFF WSCR504 4 Way dSCR Multiswitch REC 2 SAT dSCR / Legacy Frequency 290 ~ 2340MHz Min/Max Input 64 ~ 104dBV Output (AGC) 89dBV Gain (AGC) -5dB ~ +25dB REC 3 Trunk Loss Max - 5dB Consumption Min / Max @ 18V Compatibility LED Status DC IN 18V VL HL Terrestrial TERR Gain Frequency Min/Max Input 87 ~ 790MHz 52 ~ 102dBV TM TERR Max Output Gain 101dBV 8dB ±2dB 0 dB -10dB -20dB Trunk Loss Max - 5dB 0.1A / 0.15A Sky UK- EN50607 - EN50494 SCR Mode Flashing Green Legacy Mode Solid Green REC 4 TERR VH HH REC 1 VL HL V Sat A H WB LNB Q TERR VH HH Q V Sat B H WB ON DC 12V OFF WSCR508 8 Way dSCR Multiswitch REC 2 TERR Gain REC 3 REC 4 REC 5 REC 7 SAT dSCR / Legacy Frequency 290 ~ 2340MHz Min/Max Input 64 ~ 104dBV Output (AGC) 89dBV Gain (AGC) -5dB ~ +25dB Trunk Loss Max - 5dB Consumption Min / Max @ 18V Compatibility LED Status DC IN 18V VL HL TM TERR 0 dB -10dB REC 6 -20dB Terrestrial Frequency 87 ~ 790MHz Min/Max Input 52 ~ 102dBV Max Output 90dBV Gain 8dB ±2dB Trunk Loss Max - 5dB 0.1A / 0.15A Sky UK- EN50607 - EN50494 SCR Mode Legacy Mode Flashing Green Solid Green REC 8 TERR VH HH REC 2 REC 4 REC 2 REC 4 REC 6 REC 8 WB WB Q Q HH V Sat B H ON DC 12V OFF WSCR504 4 Way dSCR Multiswitch 87 ~ 790MHz 52 ~ 102dBV 101dBV 8dB ±2dB - 5dB Terrestrial 0.1A / 0.15A Sky UK- EN50607 - EN50494 Flashing Green Solid Green HH HH Frequency Min/Max Input Max Output Gain Trunk Loss Max V Sat B H VH SCR Mode Legacy Mode ON DC 12V OFF WSCR508 8 Way dSCR Multiswitch 87 ~ 790MHz Terrestrial Min/Max Input 52 ~ 102dBV 90dBV 8dB ±2dB - 5dB 0.1A / 0.15A Sky UK- EN50607 - EN50494 Flashing Green Solid Green HH Frequency VH VH Max Output Gain Trunk Loss Max SCR Mode Legacy Mode VH TERR TERR Gain TM TERR 0 dB -10dB -20dB 0 dB -10dB -20dB TERR TERR TERR Gain TM TERR TERR WB LNB Q HL V Sat A H SAT dSCR / Legacy Frequency 290 ~ 2340MHz Min/Max Input 64 ~ 104dBV 89dBV Gain (AGC) -5dB ~ +25dB - 5dB Consumption Min / Max @ 18V WB LNB Q HL HL Compatibility LED Status V Sat A H SAT dSCR / Legacy Frequency 290 ~ 2340MHz Min/Max Input 64 ~ 104dBV 89dBV Gain (AGC) -5dB ~ +25dB - 5dB Consumption Min / Max @ 18V HL Compatibility LED Status VL Output (AGC) REC 3 Trunk Loss Max VL VL Output (AGC) REC 7 Trunk Loss Max VL REC 1 DC IN 18V REC 1 REC 3 REC 5 DC IN 18V SAT B WSCR508 WATS-530WB WSCR504 WPSU-2.5A WSCR504 SAT A WSCR508 EXAMPLE CONFIGURATION Quattro Hybird IRS System Series 5 WB Taps & Splitter WT51-10WB | WT51-20WB 4 Years Warranty High Isolation Tap outputs on side for easy push fit LED power indicator Colour coded inputs and outputs Inbuilt LTE filter Features Trunk EQ Auxiliary 18V Input injects power to all SAT lines A range of passive, 5 wire WB and Quattro compatible Taps and Splitters. The Whyte Series 5 WB range of Taps are available in 1-way and 2-way with 10dB or 20dB Tap attenuation as well as a 2-way Splitter. The Series 5 WB Taps and Splitter can be directly connected to Series 5 and Series D dSCR Multiswitches using the supplied push fit connectors which reduces installation time. The Whyte Series 5 WB Taps and Splitter feature our intelligent trunk equalisation technology Trunk EQ for flat trunk output. This industry first enables longer cascades to be created for Quattro or Wideband IRS distribution systems. MODEL Frequency Inputs (F-Type Connector) Outputs (F-Type Connector) DC Input (Injection of DC applied to) DC Pass Trunk to Tap DC Pass Trunk to Trunk Trunk Through Loss Tap Loss Fixed Slope Taps Trunk EQ Isolation Max Current Pass (Trunk/Trunk Trunk/Tap) Power Indication Dimensions W x L x H (mm) Weight SAT TERR SAT TERR SAT TERR SAT TERR SAT TERR WT51-10WB 290-2340MHz 87-790MHz 4 SAT + 1 TERR 2x 4 SAT + 2x TERR All SAT Trunk & Tap YES NO YES NO 2dB±1dB 2dB±1dB 10dB 10dB YES YES >30dB 2A LED 156 x 150 x 43 360g WT51-20WB 290-2340MHz 87-790MHz 4 SAT + 1 TERR 2x 4 SAT + 2x TERR All SAT Trunk & Tap YES NO YES NO 2dB±1dB 2dB±1dB 20dB 20dB YES YES >30dB 2A LED 156 x 150 x 43 360g 11 Series 5 WB Taps & Splitter WT52-10WB | WT52-20WB | WS52-05WB 4 Years Warranty High Isolation Tap outputs on side for easy push fit LED power indicator Colour coded inputs and outputs Inbuilt LTE filter Features Trunk EQ Auxiliary 18V Input injects power to all SAT lines MODEL Frequency Inputs (F-Type Connector) Outputs (F-Type Connector) DC Input (Injection of DC applied to) DC Pass Trunk to Tap DC Pass Trunk to Trunk Trunk Through Loss Tap Loss Trunk EQ Isolation Max Current Pass (Trunk/Trunk Trunk/Tap) Power Indication Dimensions W x L x H (mm) Weight 12 SAT TERR SAT TERR SAT TERR SAT TERR SAT TERR WT52-10WB 290-2340MHz 87-790MHz 4 SAT + 1 TERR 3x 4 SAT + 3x TERR All SAT Trunk & Tap YES NO YES NO 2dB±1dB 2dB±1dB 10dB 10dB YES >30dB 2A LED 156 x 150 x 43 396g WT52-20WB 290-2340MHz 87-790MHz 4 SAT + 1 TERR 3x 4 SAT + 3x TERR All SAT Trunk & Tap YES NO YES NO 2dB±1dB 2dB±1dB 20dB 20dB YES >30dB 2A LED 156 x 150 x 43 396g WS52-05WB 290-2340MHz 87-790MHz 4 SAT + 1 TERR 2x 4 SAT + 2x TERR All SAT Trunk & Tap YES NO ~ ~ ~ ~ 4dB±1dB 4dB±1dB YES >30db 2A LED 156 x 150 x 43 364g High Isolation Inbuilt LTE filter 4 Years Warranty Features Trunk EQ LED power indicator Quattro and WB Compatible Colour coded inputs and outputs Tap outputs on side for easy push fit Auxiliary 18V Input injects power to all SAT lines Series 5 WB Taps & Splitter WT53-10WB What is Trunk EQ? We are all too aware of the age-old issue of slope. In the case of Taps, the satellite L band spectrum (950 - 2150MHz) becomes increasingly sloped with the addition of each Tap into an IRS trunk. Till now IRS engineers have used slope control that's built into amplifiers to counteract this, but this can only go so far in correcting the issue. With the introduction of Wideband (WB) LNB's the issue of slope has been exacerbated as the WB spectrum is, as the name suggests, even wider at 290MHz - 2340MHz! The disparity of Digital Channel Power (DCP) between transponders in band should not exceed 10dB. Unfortunately, we see more than this level of disparity off-air at the LNB. Add to that the slope incurred and with the addition of each Tap slope can quickly become a major problem. To address this issue Whyte Technologies created a new range of 5 wire WB/Quattro Taps with Trunk EQ. Developed by Whyte Technologies, Trunk EQ is an inbuilt Trunk Equaliser that provides equal through loss at all frequencies between 290MHz - 2340MHz which results in no slope being introduced. MODEL Frequency Inputs (F-Type Connector) Outputs (F-Type Connector) DC Input (Injection of DC applied to) DC Pass Trunk to Tap DC Pass Trunk to Trunk Trunk Through Loss Tap Loss Trunk EQ Isolation Max Current Pass (Trunk/Trunk Trunk/Tap) Power Indication Dimensions W x L x H (mm) Weight SAT TERR SAT TERR SAT TERR SAT TERR SAT TERR WT53-10WB 290-2340MHz 87-790MHz 4 SAT + 1 TERR 4 x 4 SAT + 4 x TERR All SAT Trunks & Taps YES NO YES NO 2dB ±1dB 2dB ±1dB 10dB 10dB YES >30db 2A LED 156 x 150 x 43 430g 13 Unit 1, Watermill Business Centre. Edison Road, Enfield. EN3 7XF Tel: 0330 999 1980 | info@whytetechnologies.com | www.whytetechnologies.com Technical Support North Region Daniel Hawkins MSCTE 07718 654108 dan@whytetechnologies.com South Region Paul Barnes MSCTE 07703 468149 paul@whytetechnologies.com Copyright © Whyte Technologies - June 2020